Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

Rheological and drug‐release behaviour of a scleroglucan gel matrix at different drug loadings

The aim of this study was to investigate the drug‐loading effects on release and mechanical properties of a scleroglucan gel, with the intention of considering them in delivery systems formulations. The rheological and kinetic properties of a 2 % w/w scleroglucan gel matrix loaded with 0, 0.02, 0.04, 0.06, 0.2 and 0.4 % w/w of theophylline (Th, used as a model drug) were investigated. Rheological measurements were performed in a controlled‐stress rotational‐shear rheometer under isothermal conditions. For theophylline release from the gel a flat Franz cell was used and the kinetic parameters were derived applying a semi‐empirical power law. The influence of scleroglucan molar weight on kinetic and rheological behaviour was also studied. Results suggest two possible effects of drug loading on the gel network: in the 0.04–0.06 % w/w Th range a plasticizing effect and in the 0.2–0.4 % w/w Th range a rigidization effect. In the first range mentioned, the changes in the gel structural properties tested by means of rheological measurements are coincident with changes in drug‐release kinetics. Copyright © 2005 Society of Chemical Industry     

Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.     

Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

Synthesis and characterization of functional gradient copolymers of glycidyl methacrylate and butyl acrylate

Epoxy-functional spontaneous gradient copolymers of glycidyl methacrylate (G) and n-butyl acrylate (B) were synthesized via atom transfer radical polymerization (ATRP). The copolymerization reactions were carried out in toluene solution at 70 °C, using methyl 2-bromopropionate (MBrP) as initiator and copper chloride with N,N,N′,N′′,N′′-pentamethyldiethylenetriamine (PMDETA) as the catalyst system. The kinetic behaviour of the statistical copolymerizations was studied in a wide composition interval with molar fractions of G ranging from 0.10 to 0.75. The synthesized copolymers were characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. ¹H NMR was employed to determine the copolymer composition, demonstrating the gradient character of the copolymers along the main chain in the whole monomer conversion interval. Apart from this, the sequence distribution and stereoregularity were analyzed. These microstructural experimental data agreed well with those calculated from Mayo-Lewis terminal model (MLTM) and a Bernoullian statistic with an isotacticity parameter of σ_G = 0.28 and a coisotacticity parameter of σ = 0.30.     

Do individual factors matter? A survey of scientists’ patenting in Portuguese public research organisations

This paper addresses scientists’ behaviour regarding the patenting of knowledge produced in universities and other public sector research organisations (PSROs). Recent years have witnessed a rapid growth in patenting and licensing activities by PSROs. We argue that the whole process depends to a certain extent on scientists’ willingness to disclose their inventions. Given this assumption, we conduct research into individual behaviour in order to understand scientists’ views concerning the patenting of their research results. Data from a questionnaire survey of Portuguese researchers from nine PSROs in life sciences and biotechnology is presented and analysed and complemented with in-depth interviews. The results reveal that overall the scientists surveyed show a low propensity to become involved in patenting and licensing activities, despite the fact that the majority had no “ethical” objections to the disclosure of their inventions and the commercial exploitation of these. Perceptions about the impacts of these activities on certain fundamental aspects of knowledge production and dissemination are however divergent. This may account for the low participation levels. Furthermore, most scientists perceived the personal benefits deriving from this type of activity to be low. Similarly, the majority also believed that there are many difficulties associated with the patenting process and that they receive limited support from their organisations, which lack the proper competences and structures to assist with patenting and licensing.     

Perceptual primitives from an extended 4D Hough transform

Directional features extracted from Gabor wavelets responses were used to train a structure of self-organising maps, thus classifying each pixel in the image within a neuron-map. Resulting directional primitives were grouped into perceptual primitives introducing an extended 4D Hough transform to group pixels with similar directional features. These can then be used as perceptual primitives to detect salient structures. The proposed method has independently fixed parameters that do not need to be tuned for different kind or quality of images. We present results in application to noisy FLIR images and show that line primitives for complex structures, such as bridges, or simple structures, such as runways, can be found by this approach. We compare and demonstrate the quality of our results with those obtained through a parameter-dependent traditional Canny edge detector and Hough line finding process.     

Medium and substitution pattern effects on the action of hydroxyflavones as photoprotectors against singlet molecular oxygen-mediated photooxidation of fats

The ability of mono-, di-, tri-and tetra-hydroxyflavones (7-and 3-hy-droxyflavones, 7, 8-dihydroxyflavone, baicalein and fisetin) to act as photoprotectors against singlet molecular oxygen [O²(Δ_g)]-initiated photooxidation of fats has been established by a kinetic study. The overall quenching rate constants for a series of five hydroxyflavones perfectly parallel their respective behaviour as inhibitors of the sensitized photooxidation of linoleic acid. The best antioxidative effect was exerted by 7-hydroxyflavone which does not chemically react with O²(¹Δ_g). Nevertheless for the remaining flavonoids of the series, the physical deactivation of O²(¹Δ_g) largely prevails over the chemical process. As for the cases of phenols and related hydroxy-aromatic derivatives, the ionization of the -OH group in the flavones, dramatically accelerates the rate of photooxidation. Under these conditions, the 7-hydroxyflavone also reacts effectively with O²(¹Δ_g). Given that flavonoids are natural oil components, this medium effect should be taken into account during the oil-refining process, in order to avoid the flavonoid photodestruction.     

200°C, 96-nm wavelength range, continuous-wave lasing fromunbonded GaAs MOVPE-grown vertical cavity surface-emitting lasers

We report record temperature and wavelength range attained using MOVPE-grown AlGaAs vertical cavity surface-emitting lasers (VCSEL's). Unbonded continuous-wave lasing is achieved at temperatures up to 200°C from these top-emitting VCSEL's and operation over a 96-nm wavelength regime near 850 nm is also achieved from the same nominal design. Temperature and wavelength insensitive operation is also demonstrated; threshold current is controlled to within a factor of 2 (2.5-5 mA) for a wavelength range exceeding 50 nm and to within ±30% (5-10 mA) for a temperature range of 190°C at 870 nm