Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Role of Metabolism in Bone Development and Homeostasis

Carbohydrates, fats, and proteins are the underlying energy sources for animals and are catabolized through specific biochemical cascades involving numerous enzymes. The catabolites and metabolites in these metabolic pathways are crucial for many cellular functions; therefore, an imbalance and/or dysregulation of these pathways causes cellular dysfunction, resulting in various metabolic diseases. Bone, a highly mineralized organ that serves as a skeleton of the body, undergoes continuous active turnover, which is required for the maintenance of healthy bony components through the deposition and resorption of bone matrix and minerals. This highly coordinated event is regulated throughout life by bone cells such as osteoblasts, osteoclasts, and osteocytes, and requires synchronized activities from different metabolic pathways. Here, we aim to provide a comprehensive review of the cellular metabolism involved in bone development and homeostasis, as revealed by mouse genetic studies.     

On trading wavelengths with fibers: a cost-performance based study

We consider the effect of multiple fibers on wavelength division multiplexing networks without wavelength conversion. We study networks with dynamic wavelength routing and develop accurate analytical models to compare various possible options using single- and multiple-fiber networks. We use results of an analytical model and simulation-based studies to evaluate the blocking performance and cost of multifiber networks. The number of fibers required providing high performance in multifiber networks and their costs are compared. A case is made for using multiple fibers in each link with fewer wavelengths instead of using a single fiber with many wavelengths. In particular, we show that a network with four fibers per link and with four wavelengths on each fiber without any wavelength conversion on any node yields similar same performance as the networks with one fiber per link and 16 wavelengths per fiber on each link and with full wavelength conversion capability on all nodes. In addition, the multifiber network may also offer the cost advantage depending on the relative cost of components. We develop a parametric cost model to show that multiple fibers in each link are an attractive option. Finally, such multifiber networks also has fault tolerance, with respect to a single fiber failure, already built into the system.     

Strategies for Coping With Business Trips: A Qualitative Exploratory Study.

This study aimed to better understand the impact of business trips on the traveler, the family, and the organization; to learn about maximizing the positive aspects of business travel; and to suggest measures to prevent and manage travel stress. Thirty-five business travelers (American, Israeli, and Swedish) were interviewed about the costs and benefits of their traveling, with a focus on gaining insight into coping strategies. Content analysis of the interviews showed that trips consist of 4 phases--(a) pretrip, (b) journey, (c) stay, and (d) posttrip--and that each phase is characterized by different coping strategies. Business travelers reported using proactive individual and organizational coping strategies in the pretrip phase and a combination of proactive and reactive coping strategies in the other phases. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of surfactants on phenol removal by the method of polymerization and precipitation catalysed by Coprinus cinereus peroxidase

The removal of phenol by peroxidase‐catalysed polymerization was examined using Coprinus cinereus peroxidase in the presence of surfactants. The non‐ionic surfactants with poly(oxyethene) residues, Triton X‐100, Triton X‐405 and Tween 20, enhanced the phenol removal efficiency at a level similar to high relative molecular mass poly(ethylene glycol) (relative molecular mass 3000). Although the improvement in the removal efficiency was less than that of Triton X‐100, Span 20, sodium lauryl sulfate (SDS) and lauryl trimethylammonium bromide (DTAB) also enhanced the removal efficiency. The requirement of the enzyme for almost 100% removal of 100 mg dm^?3 phenol decreased to one‐fourth by the addition of 30 mg dm^?3 Triton X‐100. Triton X‐100, Triton X‐405, Tween 20 and DTAB could reactivate the enzyme precipitated with the phenol polymer, leading to the restarting of the phenol removal reaction. Copyright © 2003 Society of Chemical Industry     

Spot welding of metal laminated composites

Composite materials of steel sheets joined by interlayers of zinc or lead- tin, show very good impact and corrosion resistance properties. Resistance spot-weld characteristics of these composite materials made of steel sheets and non-ferrous metals have been tested. Spot welds of composites with both zinc and lead- tin interlayers present good behaviour in peeling tests. Shear tests of the welds also show very high strength, probably as a consequence of simultaneous brazing because of the alloyed layer of non-ferrous material around the weld spot. This good welding behaviour enhances the possibilities of application of this composite.     

Scharnhauser公园学校和体育馆,奥斯特菲尔登

这个综合学校包括一个主建筑,一个体育馆和各种户外设施,朝向一片处在前军事基地上的住宅开发区。整个主建筑沿纵向被一个由顶部采光的回廊从中间分开,由此可以进入两侧的教室,回廊局部变宽的部分构成一个公共空间。这个构想与将城市设计理论运用于建筑内部设计的概念相符合:街道、广场和建筑被看成了建筑内部空间部分。虽然这个建筑从外部看来是个大体块,但内部空间却设计流畅,通道有的通向楼层的各个角落,也有的依着倾斜的地势因势而建。由墙面反射的散射光线加强了内部空间的肃穆和厚重感。在具有宗教感的整体风格下,整个学校的设计和装饰也显得古香古色,如一部宽阔的观光楼梯、两个塔形和壁炉形的建筑构成元素等。不同历史风格建筑的叠加给这个校区带来一种复杂的味道,堪比阿尔多·罗西(Aldo Rossi)的设计或泰辛(Tessin)新理性主义的代表作。     

Laser welding of Al55-Zn coated steel sheet

A study has been made of the procedures used for the lap and butt welding of 0.62 and 1.16 mm thickness steel sheets coated with Al55-Zn alloy, using laser-beam technology. The main problems arise in lap welding as a result of zinc evaporation from the coating. The vapour pressures of this element lead to cratering and blistering of the welds which are visible from the external surface and imply severe weld defects. An efficient solution to this problem consists in leaving a gap between the internal faces, thus allowing the zinc vapours to escape. Excessive gaps, however, lead to the molten metal collapse and to lack of penetration. In the present work, acceptable results were obtained with a maximum interface separation of 0.1 mm. This allows excellent continuity of the joints, without cracks, pores or non-metallic inclusions and with moderate hardnesses, thus demonstrating the good laser weldability of the coated material. A difficulty arises, however, in relation to the coating in zones close to the weld. In these high-temperature zones the coating is lost, and in the immediately adjacent areas the coating microstructure and phases are altered, as was shown by scanning electron microscope analyses.     

Eco-friendly Geopolymer Composite Based on Non-heat-treated Phosphate Sludge Reinforced With Polypropylene Fibers

Silicon - Geopolymers produced with metakaolin (MK) and thermally untreated phosphate sludge (PS) are beneficial and environmentally advantageous materials, but their fragility limits its...