Development of Low-Oxide MCrAlY Coatings for Gas Turbine Applications

Advanced high-energy plasma systems are being used to achieve the benefits of the high-velocity oxy-fuel (HVOF) system without losing the inherent advantages of plasma for coating of gas turbine parts. MCrAlY coatings play a very important role in the performance and reliability of gas turbine components. One of the important considerations for next generation of gas turbines, which have more demanding conditions and need to withstand ever increasing operating temperatures, is that they should possess very low oxygen content levels in the coating. Low oxygen content coatings are applied by the expensive low-pressure plasma spray (LPPS)/vacuum plasma spray (VPS) technique for critical components in aero- and land-based gas turbines. This work deals with the development of low-cost LPPS equivalent coatings (having low oxygen content) using the high-energy high-velocity plasma spray (HEHVPS) gun and inert gas shroud. A comparison has also been made with CoNiCrAlY coatings by HVOF.     

Salt-tolerant and thermostable alkaline protease from Bacillus subtilis NCIM no. 64

The proteolytic activity produced by a Bacillus subtilis isolated from a hot spring was investigated. Maximum protease production was obtained after 38 h of fermentation. Effects of various carbon and nitrogen sources indicate the requirement of starch and bacteriological peptone to be the best inducers for maximum protease production. Requirement for phosphorus was very evident, and the protease was secreted over a wide range of pH 5-11. The partially purified enzyme was stable at 60 degrees C for 30 min. Calcium ions were effective in stabilizing the enzyme, especially at higher temperature. The enzyme was extremely salt tolerant and retained 100% activity in 5M NaCl over 96 h. The molecular weight of the purified enzymes as determined by SDS-PAGE was 28,000. The enzyme was completely inactivated by PMSF, but little affected by urea, sodium dodecyl sulfate, and sodium tripoly phosphate.     

Nerve conduction velocity and H-reflex recovery in bipolar illness

Bipolar illness may be characterized by dysregulation and dysfunction of biologically active ions and ion pumps, respectively. In an effort to examine whether purported physiologic abnormalities may have functional counterparts, nerve conduction velocities (NCVs) and H-reflex recovery were examined in 7 acutely manic, 11 euthymic bipolar, 13 remitted schizophrenic, and 6 normal control individuals. All electrophysiologic tests were clinically normal. However, euthymic bipolar patients had significantly slower NCVs than either manic or normal individuals. Percent decrement of H-reflex recovery was nonsignificantly increased in manic versus euthymic bipolar subjects. Data analysis suggests lithium was not responsible for these changes. These data indicate that different mood states in bipolar illness are associated with alterations in electroneurophysiologic function.     

Refurbishment and safety upgradation of research reactor Cirus

Cirus, a 40 MW t, vertical tank type research reactor, having wide range of research facilities, was commissioned in the year 1960. This research reactor, situated at Mumbai, India has been operated and utilized extensively for isotope production, material testing and neutron beam research for nearly four decades. With a view to assess the residual life of the reactor, detailed ageing studies were carried out during the early 1990s. Based on these studies, refurbishment of Cirus for its life extension was taken up. During refurbishment, additional safety features were incorporated in various systems to qualify them for the current safety standards. This paper gives the details of the operating experiences, utilization of the reactor along with methodologies followed for carrying out detailed ageing studies, refurbishment and safety upgradation for its life extension.     

Dynamic modeling of drainage through three-dimensional porous materials

The interplay of viscous, gravity and capillary forces determines the flow behavior of two or more phases through porous materials. In this study, a rule-based dynamic network model is developed to simulate two-phase flow in three-dimensional porous media. A cubic network analog of porous medium is used with cubic bodies and square cross-section throats. The rules for phase movement and redistribution are devised to honor the imbibition and drainage physics at pore scale. These rules are based on the pressure field within the porous medium that is solved for by applying mass conservation at each node. The pressure field governs the movement and flow rates of the fluids within the porous medium. Film flow has been incorporated in a novel way. A pseudo-percolation model is proposed for low but non-zero capillary number (ratio of viscous to capillary forces). The model is used to study primary drainage with constant inlet flow rate and constant inlet pressure boundary conditions. Non-wetting phase front dynamics, apparent wetting residuals (S_wr), and relative permeability are computed as a function of capillary number (N_ca), viscosity ratio (M), and pore-throat size distribution. The simulation results are compared with experimental results from the literature. Depending upon the flow rate and viscosity ratio, the displacement front shows three distinct flow patterns—stable, viscous fingering and capillary fingering. Capillary desaturation curves (S_wr vs. N_ca) depend on the viscosity ratio. It is shown that at high flow rates (or high N_ca), relative permeability assumes a linear dependence upon saturation. Pseudo-static capillary pressure curve is also estimated (by using an invasion percolation model) and is compared with the dynamic capillary pressure obtained from the model.     

An investigation of phase transformation behavior in sputter-deposited PtMn thin films

Sputter-deposited, equiatomic PtMn thin films have application in giant magnetoresistive spin valves, tunneling magnetoresistive spin valves, and magnetic random access memory. However, the as-deposited films are found to be a disordered A1 phase in a paramagnetic state rather than an antiferromagnetic phase with L1₀ structure, which is needed for device operation. Therefore, a postannealing step is required to induce the phase transformation from the asdeposited A1 face-centered-cubic phase to the antiferromagnetic L1₀ phase. The A1 to L1₀ metastable transformation was studied by x-ray diffraction and differential-scanning calorimetry. An exothermic transformation enthalpy of −12.1 kJ/mol of atoms was determined. The transformation kinetics were simulated using the Johnson-Mehl-Avrami analysis.     

THz antennas design,developments, challenges,and applications: A review

Terahertz (0.1–10 THz) wireless communication will be the future technology to reach a top-notch data rate. THz is one of the most promising candidates for 6G systems because it provides enormous bandwidth, up to 100 GHz, and a massive data rate of up to 1 Tbps. THz antennas, antenna arrays, and MIMO antenna arrays in 6G are hot research topics for implementing 6G wireless communication systems. The 6G aims to continue to enhance the features of the 5G as it is capable of achieving the maximum high-speed data rate, excellent reliable communication, massive connectivity, and very low latency connectivity. The 6G requirements need high-gain antenna arrays and MIMO antenna arrays to combat the effect of atmospheric losses in high frequencies. An in-depth discussion of the planar THz antennas that have been extensively used in THz applications like imaging, sensing, and Internet-of-Things (IoT) has been conducted. The study of the THz antennas, antenna arrays, and MIMO antennas on different conducting materials such as copper and graphene, which are designed on different dielectric substrates such as polyimide, quartz, liquid crystalline polymer, and polytetrafluoroethylene, has been carried out in detail. Metamaterial, photoconductive, plasmonic antennas, and THz beamforming are significant parts of THz communications. This paper also provides antennas and antenna arrays based on them.     

Self-nanoemulsifying drug delivery system of docosahexanoic acid: development,in vitro,in vivo characterization

Context: Docosahexanoic acid (DHA) is an essential omega-3 fatty acid for normal brain development and its use has increased considerably in recent years.

Objective: The aim of this study is to develop and evaluate self-nanoemulsifying drug delivery systems (SNEDDS) of DHA for improved palatability, dispersibility and bioavailability.

Methods: The SNEDDS were prepared and evaluated for miscibility, employing different combinations of olive oil and soyabean oil as oil phase, Span 80, Span 20, soya phosphatidylcholine, Labrafil M 1944 CS as surfactants while Tween 80, PEG 400, Cremophor RH40 and propylene glycol as cosurfactants. Thermodynamically stable SNEDDS were characterized for dispersibility, self-emulsification time, droplet size, zeta potential along with sensory analysis. The optimized formulation was subjected to ex vivo and in vivo evaluation such as intestinal permeability, memory performance test, brain concentration and histopathology studies.

Results: The optimized SNEDDS formulation showed emulsification time of 27?±?4.7?s with droplet size of 17.6?±?3.5?nm and zeta potential of??37.6?±?0.5?mV. Intestinal absorption study depicted 18.3%, 21.5%, 41.5%, 98.7% absorption of DHA with SNEDDS-based formulation in comparison to 8.2%, 15.1%, 28.8%, 46.1% absorption of DHA with oil-based marketed formulation after 0.5, 1, 2 and 4?h. DHA concentration in brain homogenate was found to be increased to 2.6-fold in comparison to DHA-marketed formulation. This could be ascribed to enhanced dispersibility and bioavailability of DHA from nanosized formulation.

Conclusion: The developed formulation led to enhanced dispersibility and bioavailability of DHA due to the formation of nanodroplets.     

Spiral-shaped inertial stem cell device for high-throughput enrichment of iPSC-derived neural stem cells

Stem cell enrichment plays a critical role in both research and clinical applications. The typical method for stem cell enrichment may use invasive processes and takes a long period of time. Spiral-shaped microfluidic devices, which combine lift and Dean drag forces to direct cells of different sizes into separate trajectories, can be used to noninvasively process samples at a rate of milliliters per minute. This paper presents a simple 2-loop spiral-shaped inertial microfluidic devices with the aid of sheath flow to enrich neural stem cells (NSCs), derived from induced pluripotent stem cells. NSCs and spontaneously differentiated non-neural cells were mixed and flowed through the spiral-shaped devices. Samples collected at the outlets were analyzed for purity and recovery. It was found that the device focused the NSCs into a narrow trajectory, which could then be collected in two out of the eight outlets. The device was tested at different flow rates and found that the most highly enriched fractions (2.1×) with NSCs recovery 93% were achieved at the flow rate (3 ml/min). Next, we extended our investigation from 2-loop design to 10-loop design to eliminate the use of sheath flow. NSCs were enriched to 2.5×, but only 38% of the NSCs were recovered from the most enriched fractions. Spiral-shaped microfluidic devices are capable of rapid, label-free enrichment of target stem cells, and have great potential in point-of-care tissue preparation.