A study on the rapid bulk combustion of premixture using the radical seeding

The objective of this study is the rapid bulk combustion of mixture in a constant volume chamber with a tiny sub-chamber. Some narrow passage holes were arranged to induce simultaneous multi-point ignition in the main chamber by jet of burned and unburned gases including radicals from the sub-chamber, and the equivalence ratios of pre-mixture in the main chamber and the sub-chamber were the same. The principal factors of the Radical Induced Auto-Ignition (RIAl) method are the diameter of the passage holes and the volume of sub-chamber. The relationship between the sub-chamber and diameter of passage hole was represented by the ratios of sub-chamber volume to passage hole volume. The ratios are non-dimensional coefficients for sub-chamber characteristics. As a result, the RIAI method reduced the combustion period, which expanded the lean limit in comparison with SI method.     

An 8-b 100-MSample/s CMOS pipelined folding ADC

Although cascading reduces the number of folders used in folding analog-to-digital converters (ADCs), it demands wider bandwidth. The pipelining scheme proposed in this work greatly alleviates the wide bandwidth requirement of the folding amplifier. The pipelining is implemented with simple differential-pair folders. The key idea is to use odd multiples of folders with distributed interstage track/holds cooperatively with an algorithm for coding and digital error correction for the nonbinary system. The pipelined folding ADC prototyped using 0.5-μm CMOS exhibits a differential nonlinearity (DNL) of ±0.4 LSB and an integral nonlinearity (INL) of ±1.3 LSB at 100 MSample/s. The chip occupies 1.4 mm×1.2 mm in active area and consumes 165 mW at 5 V     

A 5-MHz IF digital FM demodulator

Key requirements for digital frequency-modulation (FM) demodulators are wide spurious-free dynamic range in the intermediate-frequency quantizer, linear-phase passband filtering, and accurate frequency discrimination. The proposed FM demodulator implemented digitally achieves high linearity by numerical differentiation performed at a 112× oversampling rate, suppresses adjacent channels by placing zeros of the SINC function on them, and rejects amplitude-modulation (AM) components by numerical division. A 5-MHz FM demodulator integrated with a fourth-order bandpass delta-sigma front end exhibits 74.7 dB signal-to-noise ratio, -80.7 dB total harmonic distortion, and 61 dB AM rejection within a 9-kHz message bandwidth. The 0.65-μm CMOS chip occupies 3.5×3.5 mm² of active area and consumes 180 mW with 4-V supply when clocked at 20 MHz     

Microscopic Cracking and Spalling Behavior of the Duplex Layer of a Gas-Nitrided Gun Bore Surface

In the present study, the initial wear behavior of the duplex layer consisting of an oxide film and a compound layer on gun bores was investigated. The duplex layer was produced by the gas-nitriding and the post-oxidization to the surface of the 5.56mm gun bores. The thickness of the duplex layer was measured from the specimen taken from a new gun barrel with an optical microscope. After real firing, the specimens were cut from the barrels. The microscopic wear behavior and phase identification of the duplex layer were observed by using a SEM and a XRD, respectively. A lot of surface cracks linked together to form the network of the cracks on the surface and the parallel cracks occurred in the interface between the oxide film and the compound layer. When the surface cracks and the parallel cracks join orthogonally, the spalling takes place.     

A proposal for diesel spray model using a TAB breakup model and discrete vortex method

A hybrid model consisting of a modified TAB (Taylor Analogy Breakup) model and DVM (Discrete Vortex Method) is proposed for numerical analysis of the evaporating spray phenomena in diesel engines. The simulation process of the hybrid model is divided into three steps. First, the droplet breakup of injected fuel is analyzed by using the modified TAB model. Second, spray evaporation is calculated based on the theory of Siebers’ liquid length. The liquid length analysis of injected fuel is used to integrate the modified TAB model and DVM. Lastly, both ambient gas flow and inner vortex flow of injected fuel are analyzed by using DVM. An experiment with an evaporative free spray at the early stage of its injection was conducted under in-cylinder like conditions to examine an accuracy of the present hybrid model. The calculated results of the gas jet flow by DVM agree well with the experimental results. The calculated and experimental results all confirm that the ambient gas flow dominates the downstream diesel spray flow.     

A study on the mixture formation process of evaporating diesel spray by offset incidence laser beam

This paper analyzes heterogeneous distribution of branch-like structure at the downstream region of the spray. The liquid and vapor phase of the spray are obtained using a 35mm still camera and CCD camera in order to investigate spray structure of evaporating diesel spray. There have been many studies conducted on diesel spray structure but have yet only focused on the analyses of 2-D structure. There are a few information which is concerned with 3-D structure analysis of evaporating spray. The heterogeneous distribution of droplets in inner spray affects the mixture formation of diesel spray and the combustion characteristics of the diesel engines. In this study, the laser beam of 2-D plane was used in order to investigate 3-D structure of evaporating spray. The incident laser beam was offset on the central axis of the spray. From the analysis of images taken by offset laser beam, we will examine the formation mechanism of heterogeneous distribution of the diesel spray by vortex flow at the downstream of the spray. The images of liquid and vapor phase of free spray are simultaneously taken through an exciplex fluorescence method. Through this, the branch-like structure consisting of heterogeneous distribution of the droplets forms high concentrated vapor phase at the periphery of droplets and at the spray tip.     

A study on the characteristics of soot formation and oxidation in free fuel droplet array

In this study, it was attempted to obtain the fundamental data for the formation and oxidation of soot from a diesel engine. Combustion of spray injected into a cylinder is complex phenomenon having physical and chemical processes, and these processes affect each other. There are many factors in the mechanism of the formation and oxidization of soot and it is necessary to observe spray combustion microscopically. In order to observe with that view, free fuel droplet array was used as an experimental object and the droplet array was injected into an atmospheric combustion chamber with high temperature. Ambient temperature of the combustion chamber, interdroplet spacing, and droplet diameter were selected as parameters, which affect the formation and oxidation of soot. In this study, it was found that the parameters also affect ignition delay of droplet. The ambient temperature especially affected the ignition delay of droplet as well as the flame temperature after self-ignition. As the interdroplet spacing that means the local equivalence ratio in a combustion chamber was narrow, formation of soot was increased. As diameter of droplet was large, surface area of the droplet was also broad, and hence evaporation of the droplet was more active than that of a droplet with relative small diameter.     

A 13-b 40-MSamples/s CMOS pipelined folding ADC with backgroundoffset trimming

Two key concepts of pipelining and background offset trimming are applied to demonstrate a 13-b 40-MSamples/s CMOS analog-to-digital converter (ADC) based on the basic folding and interpolation architecture. Folding amplifier stages made of simple differential pairs are pipelined using distributed interstage track-and-holders. Background offset trimming implemented with a highly oversampling delta-sigma modulator enhances the resolution of the CMOS folders beyond 12 bits. The background offset trimming circuit continuously measures and adjusts the offsets of the folding amplifiers without interfering with the normal operation. The prototype system is further refined using subranging and digital correction, and exhibits a spurious-free dynamic range (SFDR) of 82 dB at 40 MSamples/s. The measured differential nonlinearity (DNL) and integral nonlinearity (INL) are about ±0.5 and ±2.0 LSB, respectively. The chip fabricated in 0.5-μm CMOS occupies 8.7 mm² and consumes 800 mW at 5 V     

A 1.6-GS/s 12-bit return-to-zero GaAs RF DAC for multiple Nyquist operation

A 12-bit 1.6-GS/s digital-to-analog converter (DAC) implemented with 4-/spl mu/m/sup 2/ GaAs HBT process is presented. Return-to-zero (RZ) current switches are added to current steering DAC for high-frequency wideband applications to achieve 800-MHz bandwidth at first and second Nyquist band without the need for a reverse sinc equalization filter in wideband transmitter application. The RZ circuit also improves spectral purity by screening the switching noise from the analog output during data transition. Measured performance shows two-tone third-order harmonic distortion of -70 dB at 1.5-GHz output frequency, clocked at 1.6 GHz. Reliable interface with CMOS logic IC is guaranteed with the inclusion of a four-clock-deep FIFO circuit. The DAC dissipates 1.2 W at -5 V when sampled with 1.6-GHz clock, with typical output voltage swing of 1.2 V/sub PP/.