Nitrogen incorporated diamond-like carbon films by microwave surface wave plasma CVD

Nitrogen incorporated diamond like carbon films have been deposited by microwave surface wave plasma chemical vapor deposition (MW-SWP-CVD), using methane (CH₄) as the source of carbon and with different nitrogen flow rates (N₂ / CH₄ flow ratios between 0 and 3). The influence of the nitrogen incorporation on the optical, structural properties and surface morphology of the carbon films were investigated using different spectroscopic techniques. The nitrogen has been incorporated into DLC:N films which was confirmed by the X-ray photoelectron spectroscopy (XPS) measurement. Moreover, the nitrogen incorporation was accompanied by a variation in the optical gap, which was attributed to the removal or creation of band tail states.     

Diamond-like carbon thin films by microwave surface-wave plasma CVD aimed for the application of photovoltaic solar cells

The nitrogen doped diamond-like carbon (DLC) thin films were deposited on quartz and silicon substrates by a newly developed microwave surface-wave plasma chemical vapor deposition, aiming the application of the films for photovoltaic solar cells. For film deposition, we used argon as carrier gas, nitrogen as dopant and hydrocarbon source gases, such as camphor (C₁₀H₁₆O) dissolved with ethyl alcohol (C₂H₅OH), methane (CH₄), ethylene (C₂H₄) and acetylene (C₂H₂). The optical and electrical properties of the films were studied using X-ray photoelectron spectroscopy, Nanopics 2100/NPX200 surface profiler, UV/VIS/NIR spectroscopy, atomic force microscope, electrical conductivity and solar simulator measurements. The optical band gap of the films has been lowered from 3.1 to 2.4 eV by nitrogen doping, and from 2.65 to 1.9 eV by experimenting with different hydrocarbon source gases. The nitrogen doped (flow rate: 5 sccm; atomic fraction: 5.16%) film shows semiconducting properties in dark (i.e. 8.1 × 10^{− 4} Ω^{− 1} cm^{− 1}) and under the light illumination (i.e. 9.9 × 10^{− 4} Ω^{− 1} cm^{− 1}). The surface morphology of the both undoped and nitrogen doped films are found to be very smooth (RMS roughness ≤ 0.5 nm). The preliminary investigation on photovoltaic properties of DLC (nitrogen doped)/p-Si structure show that open-circuit voltage of 223 mV and short-circuit current density of 8.3 × 10^{− 3} mA/cm². The power conversion efficiency and fill factor of this structure were found to be 3.6 × 10^{− 4}% and 17.9%, respectively. The use of DLC in photovoltaic solar cells is still in its infancy due to the complicated microstructure of carbon bondings, high defect density, low photoconductivity and difficulties in controlling conduction type. Our research work is in progress to realize cheap, reasonably high efficiency and environmental friendly DLC-based photovoltaic solar cells in the future.     

Synthesis of nitrogen incorporated diamond-like carbon thin films using microwave surface-wave plasma CVD

Nitrogenated diamond-like (DLC:N) carbon thin films have been deposited by microwave surface wave plasma chemical vapor deposition on silicon and quartz substrates, using argon gas, camphor dissolved in ethyl alcohol composition and nitrogen as plasma source. The deposited DLC:N films were characterized for their chemical, optical, structural and electrical properties through X-ray photoelectron spectroscopy, UV/VIS/NIR spectroscopy, Raman spectroscopy, atomic force microscope and current–voltage characteristics. Optical band gap decreased (2.7 to 2.4 eV) with increasing Ar gas flow rate. The photovoltaic measurements of DLC:N / p-Si structure show that the open-circuit voltage (V_oc) of 168.8 mV and a short-circuit current density (J_sc) of 8.4 μA/cm² under light illumination (AM 1.5 100 mW/cm²). The energy conversion efficiency and fill factor were found to be 3.4 × 10^{− 4}% and 0.238 respectively.     

Note: Compact high voltage pulse transformer made using a capacitor bank assembled in the shape of primary

The experimental results of an air-core pulse transformer are presented, which is very compact (<10 Kg in weight) and is primed by a capacitor bank that is fabricated in such a way that the capacitor bank with its switch takes the shape of single-turn rectangular shaped primary of the transformer. A high voltage capacitor assembly (pulse-forming-line capacitor, PFL) of 5.1 nF is connected with the secondary of transformer. The transformer output voltage is 160 kV in its second peak appearing in less than 2 μS from the beginning of the capacitor discharge. The primary capacitor bank can be charged up to a maximum of 18 kV, with the voltage delivery of 360 kV in similar capacitive loads.     

Morphology,Mineralogy and Mixing of Individual Atmospheric Particles Over Kanpur (IGP): Relevance of Homogeneous Equivalent Sphere Approximation in Radiative Models

Estimation of the direct radiative forcing (DRF) by atmospheric particles is uncertain to a large extent owing to uncertainties in their morphology (shape and size), mixing states, and chemical composition. A region-specific database of the aforementioned physico-chemical properties (at individual particle level) is necessary to improve numerically-estimated optical and radiative properties. Till date, there is no detailed observation of the above mentioned properties over Kanpur in the Indo-Gangetic Plain (IGP). To fill this gap, an experiment was carried out at Kanpur (IITK; 26.52°N, 80.23°E, 142 m msl), India from April to July, 2011. Particle types broadly classified as (a) Cu-rich particles mixed with carbon and sulphur (b) dust and clays mixed with carbonaceous species (c) Fe-rich particles mixed with carbon and sulfur and (d) calcite (CaCO₃) particles aged with nitrate, were observed. The frequency distributions of aspect ratio (AR; indicator of extent of particle non-sphericity) of total 708 particles from April to June reveal that particles with aspect ratio range >1.2 to ≤1.4 were abundant throughout the experiment except during June when it was found to shift to high AR range, >1.4 to ≤1.6 (followed with another peak of AR i.e. >2 to ≤2.4) due to dust storm conditions enhancing the occurrence of more non-spherical particles over the sampling site. The spherical particles (and close to spherical shape; AR range, 1.0 to ≤1.2) were found to be <20% throughout the experiment with a minimum (11.5%) during June. Consideration of Homogeneous Equivalent Sphere Approximation (HESA) in the optical/radiative model over the study region is found to be irrelevant during the campaign.     

Availability and cost-centered preventive maintenance scheduling of continuous operating series systems using multi-objective genetic algorithm: A case study

This article presents a multi-objective (maximization of availability and minimization of maintenance cost) preventive maintenance (PM) scheduling model for a continuous operating series system (COSS) which do not provide an off-working period for PM. The objective functions are optimized by using a Multi-Objective Genetic Algorithm (MOGA). The effectiveness of the model is demonstrated through a coal-fired boiler-tube. The case study shows that the model can improve the availability along with profound reduction of the maintenance cost, i.e., increases the profit of the plant.     

Preparation of CaCO3‐based biomineralized polyvinylpyrrolidone–carboxymethylcellulose hydrogels and their viscoelastic behavior

In the blend of natural and synthetic polymer‐based biomaterial of polyvinylpyrrolidone (PVP) and carboxymethylcellulose (CMC), fabrication of CaCO₃ was successfully accomplished using simple liquid diffusion technique. The present study emphasizes the biomimetic mineralization in PVP–CMC hydrogel, and furthermore, several properties of this regenerated and functionalized hydrogel membranes were investigated. The physical properties were studied and confirmed the presence of CaCO₃ mineral in hydrogel by Fourier transform infrared spectroscopy and Scanning electron microscopy. Moreover, the absorptivity of water and mineral by PVP–CMC hydrogel was studied to determine its absorption capacity. Further, the viscoelastic properties (storage modulus, loss modulus, and complex viscosity) of mineralized and swelled samples (time: 5–150 min) were measured against angular frequency. It is interesting to know the increase of elastic nature of mineralized hydrogel filled with CaCO₃ maintaining the correlation between elastic property and viscous one of pure hydrogel. All these properties of biomineralized hydrogel suggest its application in biomedical field, like bone treatment, bone tissue regeneration, dental plaque and tissue replacement, etc. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40237.     

Studies on curcumin and curcuminoids XVII. Variation in the content of curcuminoids inCurcuma longa L. from Nenal during one season

Summary The content of curcuminoids inCurcuma longa L. before, during and after a normal harvesting period was investigated. The plant material was grown in the Kathmandu area. Bis-demethoxycurcumin was found to be the main constituent. No significant change in the curcuminoid content was observed during a 17-week sampling period.

---

Studien über Curcumin und Curcuminoide. XVII. Veränderung des Gehaltes an Curcuminoiden inCurcuma longa L. (Zingiberaceae) aus Nepal warend der Ernte

Zusammenfassung Der Gehalt an Curcuminoiden inCurcuma longa L. (Zingiberaceae) wurde vor, während und nach der normalen Erntezeit untersucht. Das Pflanzenmaterial stammt aus dim Kathmandu-Tal in Nepal. Der Hauptinhaltsstoff ist Bisdemethoxycurcumin. Im Laufe von 17 Wochen konnten keine signifikante Schwankungen observiert werden.