Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Mechanophysical Cues in Extracellular Matrix Regulation of Cell Behavior

The extracellular matrix (ECM) is a macromolecular network that can provide biochemical and structural support for cell adhesion and formation. It regulates cell behavior by influencing biochemical and physical cues. It is a dynamic structure whose components are modified, degraded, or deposited during connective tissue development, giving tissues strength and structural integrity. The physical properties of the natural ECM environment control the design of naturally or synthetically derived biomaterials to guide cell function in tissue engineering. Tissue engineering is an important field that explores physical cues of the ECM to produce new viable tissue for medical applications, such as in organ transplant and organ recovery. Understanding how the ECM exerts physical effects on cell behavior, when cells are seeded in synthetic ECM scaffolds, is of utmost importance. Herein we review recent findings in this area that report on cell behaviors in a variety of ECMs with different physical properties, i.e., topology, geometry, dimensionality, stiffness, and tension.     

Effect of ionic content,solid content,degree of neutralization,and chain extension on aqueous polyurethane dispersions prepared by prepolymer method

There are many variables in the preparation of aqueous polyurethane (PU) dispersions. Carboxylic acid content, solid content, degree of pre/postneutralization of the carboxylic acids, and chain extension all impact dispersion particle size, viscosity, pH, molecular weights, and glass transition temperature. This study evaluated the impact of these variables on a given PU dispersion formulation prepared from isophorone diisocyanate, an aliphatic polyester polyol, dimethylol propionic acid, and hexamethylene diamine with triethyl amine as the neutralizing base and N‐methyl pyrrolidone as the cosolvent. Changes in carboxylic acid content, degree of preneutralization, and chain extension were found to have the expected impacts on dispersions properties. Increased ionic content in the dispersion step led to lower particle size and higher viscosity, increased chain extension with its concurrent increase in molecular improved subsequent film properties. Surprising results were obtained by varying the amount of postneutralization and from increased solids content at the time of dispersion. Unexpectedly, both of these variations led to much higher dispersion viscosities and particle size in solution. To have these changes take place, it is theorized that there is a major change in solution morphology caused by these modifications. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2514–2520, 2005     

Resource contention in shared-memory multiprocessors: A parameterized performance degradation model

A standard metric conventionally employed to compare the performance of different multiprocessor systems is speedup. Although providing a measure of the improvement in execution speed achievable on a system, this metric does not yield any insight into the factors responsible for limiting the potential improvement in speed. This paper studies the performance degradation in shared-memory multiprocessors as a result of contention for shared-memory resources. A replicate workload framework with a flexible mechanism for workload specification is proposed for measuring performance. Two normalized performance metrics—efficiency and overhead factor—are introduced to quantify the factors limiting performance and facilitate comparison across architectures. Finally, the proposed model is employed to measure and compare the performance of three contemporary shared-memory systems, with special emphasis on the newly released BBN Butterfly-II (TC2000), currently undergoing Beta test.     

Purification and some properties of a xylanase from Aspergillus sydowii MG49

Aspergillus sydowii MG49 produces a 30-kDa exosplitting xylobiohydrolase during growth on xylan. A specific chemical modification and substrate protection analysis of purified xylanase provided evidence that tryptophan and carboxy and amino groups are present at the catalytic site of this enzyme. Thermal inactivation of the xylanase occurs because of irreversible polymolecular aggregation, which is slower in the presence of glycerol.     

Channel management in microcell/macrocell cellular radio systems

In this paper, we study spectrum management in a two-tier microcell/macrocell cellular system. Two issues are studied: micro-macro cell selection and frequency spectrum partitioning between microcells and macrocells. To keep the handoff rate in a two-tier cellular system at an acceptable level, low mobility users (with speed υ0 ) should undergo handoffs at microcell boundaries, and high mobility users (with speed υ>V₀) should undergo handoffs at macrocell boundaries. The mobile determines user mobility from microcell sojourn times and uses it for channel assignment at call origination and handoff. The probability of erroneous assignment of a mobile to a microcell or macrocell is shown to be significantly lower than previous approaches. We investigate the optimal velocity threshold, V₀, and propose that it may be dynamically adjusted according to traffic load. Finally, we propose a systematic way for finding an optimal partition of frequency spectrum between microcells and macrocells. This partitioning is based on the traffic load and velocity distribution of mobiles in the system     

Stabilization and termination of severe accidents in LWRs

The last 20 years of research on severe accident safety for light water reactors (LWRs) has resolved a number of issues. However, the issue of melt/debris coolability is still unresolved. At stake is the stabilization and termination of a severe accident, if ever it would occur. The stabilization and termination can be established only through the coolability of the melt or the particulate debris, which are found in-vessel, or ex-vessel, depending upon the extent of the progression of a postulated accident.This paper will review the state of the art of coolability during a severe accident for the current light water reactors (LWRs). It will also review whether the accident management actions will be effective in terminating a postulated severe accident. The attention paid to the stabilization and coolability in future LWRs will be discussed and the design solutions will be evaluated.     

Effect of laser irradiation on the electrical properties of amorphous germanium films

Amorphous films of germanium were grown using a vacuum evaporation technique, on glass substrates kept at room temperature. As-grown films were irradiated with Q-Switched Nd-YAG laser pulses (=1.06 m, 20nsec, 10 to 50Jcm^–2). The d.c. conductivity measurements were made in the temperature range 77 to 300 K. It was observed that the effect of laser irradiation was similar to the effect caused by the thermal annealing of the films. The d.c. conductivity data were analysed in the light of Mott's theory of a variable range hopping conduction process.