Establishment time of liquid flow in a bath agitated by bottom gas injection

The establishment time of gas-liquid two-phase flows in a cylindrical bath agitated by bottom gas injection through a central single-hole bottom nozzle was investigated. Because the turbulence intensity in the bath was comparable to or larger than the unity, the conventional definition of the flow establishment time based on the history of mean velocity was not suitable for the present case. In fact, it was difficult to determine the flow establishment time based on the well-known 90 or 99 pct criterion for the mean velocity. Accordingly, two methods of determining the flow establishment time by focusing on the turbulence components instead of the mean velocity components were proposed. Velocity measurements were made with a two-channel laser Doppler velocimeter. The flow establishment time was correlated as a function of gas flow rate. Close agreement was obtained by the two methods.     

Rapid detection cytomegalovirus pneumonia in recipients of bone marrow transplant: evaluation and comparison of five survey methods for bronchoalveolar lavage fluid

To detect cytomegalovirus-associated interstitial pneumonia (CMV-IP) in recipients of BMT in its earliest stage, five CMV methods were assessed for their usefulness using bronchoalveolar lavage fluid as the test specimen. Of the 43 cases enrolled in the study, PCR was positive in 12 cases, shell vial in eight, culture in eight and cytology in three. There were no positive cases in in situ hybridization. Based on this result, the 43 cases were classified into four groups: Group 1, three cases: positive in PCR, shell vial and cytology; Group 2, five cases: positive in PCR and shell vial; Group 3, four cases: positive only in PCR; and Group 4, 31 cases: negative in all CMV tests. Cases in Group 1 were judged as having the highest risk of overt CMV-IP. They were successfully treated with a combination of ganciclovir and immunoglobulin. Group 2 was diagnosed as having active CMV infection and ganciclovir monotherapy was effective for these patients. Groups 3 and 4 were not given anti-CMV therapy, but they were free from CMV-related manifestations throughout the study. The sensitivity and specificity of each survey method for the detection of Groups 1 and 2 were 1.0 and 0.89 in PCR, 1.0 and 1.0 in shell vial, 0.88 and 1.0 in culture, and 0.38 and 1.0 in cytology. Similarly, the positive and negative predictive values were 0.67 and 1.0 in PCR, 1.0 and 1.0 in shell vial, 1.0 and 0.97 in culture, and 1.0 and 0.88 in cytology. Thus, CMV survey on bronchoalveolar fluid was thought to be useful in detecting post BMT CMV-IP in its earliest stage.     

Effects of cytogenin on spontaneous arthritis in MRL/1 mice and on pristane-induced arthritis (PIA) in DBA/1J mice

Cytogenin, 8-hydroxy-3-hydroxymethyl-6-methoxyisocoumarin, has low cytotoxicity on murine and human tumour cells in vitro. It augments or suppresses phagocytosis of macrophages and lymphocyte proliferation. It has been reported that cytogenin has a potent inhibitory effect clinically on adjuvant arthritis in Lewis rats and on type II collagen-induced arthritis in DBA/1J mice. Our experimental findings provide evidence that cytogenin has beneficial effects on spontaneous polyarthritis in MRL/1 mice and pristane-induced arthritis in DBA/1J mice. The results suggest that the mode of the anti-arthritic action of cytogenin is different from those of NSAIDs; although the precise mode of action remains unclear, cytogenin may become an excellent therapeutic agent for rheumatoid arthritis.     

Modern interpretation on the high-stretching of natural rubber attained by the classic ‘racking’ method

To investigate the mechanism of high elongation of natural rubber attained by the ‘racking method’, a strip of smoked-sheet was elongated up to 150 times in length, by stretching rapidly at room temperature and forcing to shrink at 75-80 °C repeatedly. On X-ray diffraction, a typical fibre pattern with an amorphous ring appeared already at ×10 (stretch ratio=10). The degree of crystallinity increased to the level of 17-18% at ×20 and turned to decrease after ×60, but the degree of crystallite orientation reached at a high level already at ×10 and did not change significantly and the half-height width of reflection profiles stayed almost at a constant level, while the Young's modulus increased up to ca. 300 MPa at ×100 and then fell rather discontinuously. It was assumed that some fractions of chain segments between entanglements were gradually broken in each step of stretching operation, rather than disentangled and slipped.     

Effects of cononsolvency on gelation of poly(vinyl alcohol) in mixed solvents of dimethyl sulfoxide and water

We studied the rates of gelation and phase separation of poly(vinyl alcohol) (PVA) solutions in mixtures of dimethyl sulfoxide (DMSO) and water at 25 °C and found that both the rates show a maximum at a volume fraction of DMSO φ_DMSO=0.60 while gelation was not observed either in pure DMSO or pure water, suggesting that water-DMSO is a cononsolvent system for PVA. On the basis of the data by Cowie [Can J Chem 36 (1961) 2240] we concluded that the 1:2 stable complex between one DMSO molecule and two water molecules is the main cause of this cononsolvency.     

Induction of necrosis by zinc in prostate carcinoma cells and identification of proteins increased in association with this induction

Endothelin-1 (ET-1) is a cardiovascular peptide that binds to two distinct receptors, ET(A) and ET(B), resulting in systemic and regional vasoconstriction, alteration in sodium excretion, mitogenesis, and release of other vasoactive peptides such as atrial natriuretic peptide (ANP). A role for ET-1 has been proposed in congestive heart failure (CHF) based on the increase in circulating ET-1 in this cardiovascular disease state. The present study determined the cardiorenal and endocrine responses to chronic selective oral ETA antagonism in experimental CHF. Two groups of conscious dogs underwent 21 days of pacing-induced CHF. These groups included a control untreated group (n = 6) and a group that received an orally active ET(A) receptor antagonist (A-127722, Abbott Pharmaceuticals, 5 mg/kg PO bid, n = 6). Each group was studied at baseline before the onset of CHF and after 14 and 21 days of CHF. Compared with the CHF control group, the ET(A) receptor antagonism group at 14 days of CHF showed lower mean arterial pressure and systemic vascular resistance. Similarly, ET(A) receptor antagonism markedly attenuated the increase in circulating ANP despite similar atrial pressures. At 21 days of CHF, ET(A) receptor antagonism lowered pulmonary artery pressure, pulmonary vascular resistance, and systemic vascular resistance in association with a higher cardiac output. Plasma ANP remained suppressed. Despite the lower mean arterial pressure and circulating ANP in the ET(A) receptor antagonist group, the absolute decrease in sodium excretion from baseline was less compared with the untreated CHF control group. The present investigation supports the conclusion that endogenous ET-1 participates in the systemic and pulmonary vasoconstriction, the elevation of ANP, and the sodium retention that characterize this model of experimental CHF, suggesting a potential therapeutic role for ET(A) receptor antagonism in CHF.     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Design of moving magnet type pickup actuator using inserted coil

Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young’s modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.     

Logic circuit synthesis using Prolog

This paper briefly reviews the current use of CAD in logic design, and then describes an expert system used to synthesize logic circuits. Specialized knowledge dealing with standard TTL ICs is written in Prolog and AGE, and the results are compared.