MIMO Channel Capacity and Configuration Selection for Switched Parasitic Antennas

Multiple-input multiple-output (MIMO) systems offer significant enhancements in terms of their data rate and channel capacity compared to traditional systems. However, correlation degrades the system performance and imposes practical limits on the number of antennas that can be incorporated into portable wireless devices. The use of switched parasitic antennas (SPAs) is a possible solution, especially where it is difficult to obtain sufficient signal decorrelation by conventional means. The covariance matrix represents the correlation present in the propagation channel, and has significant impact on the MIMO channel capacity. The results of this work demonstrate a significant improvement in the MIMO channel capacity by using SPA with the knowledge of the covariance matrix for all pattern configurations. By employing the “water-pouring algorithm” to modify the covariance matrix, the channel capacity is significantly improved compared to traditional systems, which spread transmit power uniformly across all the antennas. A condition number is also proposed as a selection metric to select the optimal pattern configuration for MIMO-SPAs.     

Effect of phyllanthus emblica biodiesel based lubricant on cylinder liner and piston ring

In the present time, need of biogenic lubricants is the focusing area which will be biodegradable, avirulent and eco-friendly. Current experimental tests depict the effect of ‘Phyllanthus emblica’ a non-edible feedstock through pin on disc tribo tester. Tests were conducted to evaluate the impact of 0, 10, 20 and 30 % blending of Phyllanthus emblica with SAE20W40 lubricating oil on cylinder liner and piston ring. Promising results have been manifested with 10 % blending of biodiesel (BD) with lubricating oil in terms of coefficient of friction and specific wear rate in comparison with other examined feedstock. For analysis of wear debris in the used oil analytical ferrography was also done. The effects of temperature on wear and friction characteristics have also been discussed.

     

Numerical investigation of heat transfer and friction factor in ribbed triangular duct solar air heater using Computational fluid dynamics (CFD)

Journal of Mechanical Science and Technology - The Computational fluid dynamics (CFD) based analysis is carried out to investigate the thermal and hydraulic performance of circular rib roughened...     

Editorial

Mobile Networks and Applications -     

Resource assignment for integrated services in wireless ATM networks

The task of supporting integrated multirate multimedia traffic in a bandwidth-poor wireless environment poses a significant challenge for network designers. In this paper we propose a novel bandwidth allocation strategy which partitions the available bandwidth amongst the different traffic classes in a manner that ensures quality-of-service guarantees for digital video while minimizing the maximum blocking probability for voice and data connections. At the connection level, near-optimum utilization of the reserved bandwidth for video traffic is achieved through an intra-frame statistical multiplexing algorithm, while at the system level the delicate task of partitioning the bandwidth between voice, video and data is accomplished by developing an efficient algorithm which uses traffic parameters consisting only of the aggregate traffic load and the total available bandwidth. The algorithm, built on non-trivial mathematical results is robust, easy to implement and has a geometric rate of convergence which ensures that the partitioning points are found quickly. These properties make it well suited for practical implementations, even for cases where changes in the aggregate traffic loads cause bandwidth allocations to be recomputed frequently. © 1998 John Wiley & Sons, Ltd.     

Optimization of wear and friction characteristics of Phyllanthus Emblica seed oil based lubricant using response surface methodology

The escalating prices, rapid diminution of fossil fuels, tenacious regulations of the authorities, etc. enforced towards the alternate biogenic fuel for lubrication. The present study assessed the lubricity characteristics of Phyllanthus Emblica seed oil based lubricants by using a pin on disc (POD) tester. The design of experimentations has been carried out using response surface methodology (RSM). The value of parameters such as blend ratio, load and sliding speed ranges from 0 to 20%, 50 to 100?N and 1.3 to 3.8?m/s, respectively, are used to assess the value of specific wear rate (SWR) and coefficient of friction (COF). Test results illustrate that the adhesive wear occurred during the experiments. It has been observed that AB10 shows the probable results in terms of wear and friction characteristics as compared to other lubricant variants at low load and high sliding velocity conditions and perform as an excellent lubricant additive. This contributes towards the replacement of petroleum based lubricants. Analytical ferrography and total acid number (TAN) analysis of the used oil was also done to study the wear debris in the oil.     

Cuckoo and krill herd‐based k‐means++ hybrid algorithms for clustering

Clustering algorithms can be optimized using nature‐inspired techniques. Many algorithms inspired by nature, namely, firefly algorithm, ant colony optimization algorithm, and so forth, have improved clustering results. k‐means is a popular clustering technique but has limitations of local optima, which have been overcome using its various hybrids. k‐means++ is a hybrid k‐means clustering algorithm that gives the procedure to initialize centre of the clusters. In the proposed work, hybrids of nature‐inspired techniques using cuckoo and krill herd algorithm are implemented on k‐means++ algorithm to enhance cluster quality and generate optimized clusters. The designed algorithms are implemented, and the results are compared with their counterparts. Performance parameters such as accuracy, f‐measure, error rate, standard deviation, CPU time, cluster quality check, and so forth are used to measure the clustering capabilities of these algorithms. The results indicate the high performance of newly designed algorithms.     

2005

In recent years, wireless Internet service providers (WISPs) have established Wi-Fi hotspots in increasing numbers at public venues, providing local coverage to traveling users and empowering them with the ability to access email, Web, and other Internet applications on the move. In this paper, we observe that while the mobile computing landscape has changed both in terms of number and type of hotspot venues, there are several technological and deployment challenges remaining before hotspots can become an ubiquitous infrastructure. These challenges include authentication, security, coverage, management, location services, billing, and interoperability. We discuss existing research, the work of standards bodies, and the experience of commercial hotspot providers in these areas, and then describe compelling open research questions that remain. Anand Balachandran has been a member of the research staff at Intel Research, Seattle since October 2003. His research interests include wireless networking systems, wireless Internet, infrastructure and ad-hoc networks, and mobile and ubiquitous computing. He received his Bachelor of Technology degree from the Indian Institute of Technology, Madras in 1995, his Master’s degree from Columbia University, in 1997, and his Ph.D. degree in Computer Science and Engineering from the University of California at San Diego in 2003. Geoffrey M. Voelker is an assistant professor at the University of California at San Diego. His research interests include operating systems, distributed systems, networking, and mobile computing. He received a BS degree in Electrical Engineering and Computer Science from the University of California at Berkeley in 1992, and the M.S. and Ph.D. degrees in Computer Science and Engineering from the University of Washington in 1995 and 2000, respectively. In 2000, he received the first Computing Research Association (CRA) Digital Government Fellowship, and in 2002 he received the Hellman Young Faculty Fellowship at UCSD. Victor Bahl is a Senior Researcher and the Manager of the Networking Group in Microsoft Research. His research interests span a variety of problems in wireless networking. In addition to making many product contributions, he has authored over 65 scientific papers, 44 issued and pending patent applications and several book chapters. He is the co-founder and Chairman of the ACM Special Interest Group in Mobility (SIGMOBILE); the founder and past Editor-in-Chief of ACM Mobile Computing and Communications Review, and the founder and Steering Committee Chair of ACM/USENIX Mobile Systems Conference (MobiSys); He has served on the editorial board of IEEE Journal on Selected Areas in Communications, and is currently serving on the editorial boards of Elsevier’s Adhoc Networking Journal, Kulwer’s Telecommunications Systems Journal, and ACM’s Wireless Networking Journal. He has served as a guest editor for several IEEE and ACM journals and on networking review panels organized by the National Science Foundation (NSF), the National Research Council (NRC) and European Union’s COST. He has served as the General Chairman, Program Chair and Steering Committee member of several IEEE and ACM conferences and on the Technical Program Committee of over 45 international conferences and workshops. He is the recipient of Digital’s Doctoral Engineering Award (1994) and ACM SIGMOBILE’s Distinguished Service Award (2001). He is a Fellow of the ACM, a Senior Member of the IEEE and a past president of the electrical engineering honor society Eta kappa Nu-Zeta Pi. Dr. Bahl received his Ph. D in Computer Systems Engineering from the University of Massachusetts Amherst.This revised version was published online in August 2005 with a corrected cover date.     

Formamidinium‐Based Dion‐Jacobson Layered Hybrid Perovskites: Structural Complexity and Optoelectronic Properties

Layered hybrid perovskites have emerged as a promising alternative to stabilizing hybrid organic–inorganic perovskite materials, which are predominantly based on Ruddlesden‐Popper structures. Formamidinium (FA)‐based Dion‐Jacobson perovskite analogs are developed that feature bifunctional organic spacers separating the hybrid perovskite slabs by introducing 1,4‐phenylenedimethanammonium (PDMA) organic moieties. While these materials demonstrate competitive performances as compared to other FA‐based low‐dimensional perovskite solar cells, the underlying mechanisms for this behavior remain elusive. Here, the structural complexity and optoelectronic properties of materials featuring (PDMA)FA_n–1Pb_nI_3n+1 (n = 1–3) formulations are unraveled using a combination of techniques, including X‐ray scattering measurements in conjunction with molecular dynamics simulations and density functional theory calculations. While theoretical calculations suggest that layered Dion‐Jacobson perovskite structures are more prominent with the increasing number of inorganic layers (n), this is accompanied with an increase in formation energies that render n > 2 compositions difficult to obtain, in accordance with the experimental evidence. Moreover, the underlying intermolecular interactions and their templating effects on the Dion‐Jacobson structure are elucidated, defining the optoelectronic properties. Consequently, despite the challenge to obtain phase‐pure n > 1 compositions, time‐resolved microwave conductivity measurements reveal high photoconductivities and long charge carrier lifetimes. This comprehensive analysis thereby reveals critical features for advancing layered hybrid perovskite optoelectronics.