Studies on bitumen production from North Rumaila crude oil

In the present investigation, the effect of three process variables viz., air rate, temperature and time of oxidation has been studied to determine the possibility of making paving bitumens from North Rumaila Crude Oil. In order to have flexibility in the choice of proper feedstock for bitumen production, the effect of these process parameters was studied on three different vacuum residues. Air rate and temperature of oxidation were optimised to produce a bitumen product having less temperature susceptibility. The composition studies of typical feeds and oxidised products indicate that mainly “saturates” components get converted to “asphaltics” on air blowing.     

A Mouse-Based Method to Monitor Wheat Allergens in Novel Wheat Lines and Varieties Created by Crossbreeding: Proof-of-Concept Using Durum and A. tauschii Wheats

Wheat allergies are potentially life-threatening because of the high risk of anaphylaxis. Wheats belong to four genotypes represented in thousands of lines and varieties. Monitoring changes to wheat allergens is critical to prevent inadvertent ntroduction of hyper-allergenic varieties via breeding. However, validated methods for this purpose are unavailable at present. As a proof-of-concept study, we tested the hypothesis that salt-soluble wheat allergens in our mouse model will be identical to those reported for humans. Groups of Balb/cJ mice were rendered allergic to durum wheat salt-soluble protein extract (SSPE). Using blood from allergic mice, a mini hyper-IgE plasma bank was created and used in optimizing an IgE Western blotting (IEWB) to identify IgE binding allergens. The LC-MS/MS was used to sequence the allergenic bands. An ancient Aegilops tauschii wheat was grown in our greenhouse and extracted SSPE. Using the optimized IEWB method followed by sequencing, the cross-reacting allergens in A. tauschii wheat were identified. Database analysis showed all but 2 of the durum wheat allergens and all A. tauschii wheat allergens identified in this model had been reported as human allergens. Thus, this model may be used to identify and monitor potential changes to salt-soluble wheat allergens caused by breeding.     

Parallel adaptive decision feedback equalizers

Several algorithms for parallel implementation of adaptive decision feedback equalizers (DFEs) are proposed. The first is a double-row DFE algorithm that outperforms previous approaches. Under the no-error-propagation assumption, the algorithm will perform exactly like a serially adapting DFE. The multiplication complexity of the double-row DFE algorithm is of the same order as that of the parallel DFE algorithm and the extended least-mean-square (LMS) method. The previous algorithms and the double-row DFE algorithm may become impractical to implement due to their large computational complexity, so three additional parallel implementations of the DFE, which lead to considerable hardware savings and avoid the coding loss of the former approaches, are presented. The different algorithms are compared on the basis of convergence analysis and simulation results     

Finite data performance analysis of MVDR beamformer with andwithout spatial smoothing

The finite-data performance of a minimum-variance distortionless response (MVDR) beamformer is analyzed with and without spatial smoothing, using first-order perturbation theory. In particular, expressions are developed for the mean values of the power gain in any direction of interest, the output power, and the norm of the weight-error vector, as a function of the number of snapshots and the number of smoothing steps. It is shown that, in general, the smoothing, in addition to decorrelating the sources, can alleviate the effects of finite-data perturbations. The above expressions are reduced to the case in which no spatial smoothing is used. These expressions are valid for an arbitrary array and for arbitrarily correlated signals. For this case, an expression for the variance of the power gain is also developed. For a single interference case it is shown explicitly how the SNR, spacing of the interference from the desired signal and the correlation between them influence the beamformer performance. Simulations verify the usefulness of the theoretical expressions     

Evaluation of the Biocompatibility of PLACL/Collagen Nanostructured Matrices with Cardiomyocytes as a Model for the Regeneration of Infarcted Myocardium

Pioneering research suggests various modes of cellular therapeutics and biomaterial strategies for myocardial tissue engineering. Despite several advantages, such as safety and improved function, the dynamic myocardial microenvironment prevents peripherally or locally administered therapeutic cells from homing and integrating of biomaterial constructs with the infarcted heart. The myocardial microenvironment is highly sensitive due to the nanoscale cues that it exerts to control bioactivities, such as cell migration, proliferation, differentiation, and angiogenesis. Nanoscale control of cardiac function has not been extensively analyzed in the field of myocardial tissue engineering. Inspired by microscopic analysis of the ventricular organization in native tissue, a scalable in‐vitro model of nanoscale poly(L ‐lactic acid)‐co ‐poly(? ‐caprolactone)/collagen biocomposite scaffold is fabricated, with nanofibers in the order of 594 ± 56 nm to mimic the native myocardial environment for freshly isolated cardiomyocytes from rabbit heart, and the specifically underlying extracellular matrix architecture: this is done to address the specificity of the underlying matrix in overcoming challenges faced by cellular therapeutics. Guided by nanoscale mechanical cues provided by the underlying random nanofibrous scaffold, the tissue constructs display anisotropic rearrangement of cells, characteristic of the native cardiac tissue. Surprisingly, cell morphology, growth, and expression of an interactive healthy cardiac cell population are exquisitely sensitive to differences in the composition of nanoscale scaffolds. It is shown that suitable cell–material interactions on the nanoscale can stipulate organization on the tissue level and yield novel insights into cell therapeutic science, while providing materials for tissue regeneration.     

Estimation of Activation Energies for Sintering 8 mol % Yttria‐Zirconia Using Conventional and Microwave Heating

The activation energies were estimated for conventional and microwave sintering of Zirconia‐8 mol% Yttria (8YZ). The results were analyzed to explain the mechanisms responsible for enhancing flux/mass transport during microwave sintering. The activation energies were evaluated using isothermal and nonisothermal methods. The nonisothermal sintering resulted in higher values of activation energies, as compared to isothermal methods. This behavior may be due to the presence of more than one type of diffusion mechanism dominating throughout the process. The nonisothermal method represented activation energy values close to a single densification mechanism (either volume or grain boundary diffusion). A value of 500 ± 25 kJ/mol was observed for nonisothermal sintering of 8YZ with conventional heating. This value was close to the volume diffusion of Zr ion (500 kJ/mol). The microwave sintering (using nonisothermal method) resulted in activation energy values of 200 ± 27 kJ/mol, a value close to the grain boundary diffusion of the Zr ion.     

Catalytic Hydroprocessing of p-Cresol: Metal, Solvent and Mass-Transfer Effects

A systematic study of the comparative performances of supported Pt, Pd, Ru and conventional CoMo/Al₂O₃, NiMo/Al₂O₃, NiW/Al₂O₃ catalysts as well as the effects of solvent, H₂ pressure and temperature on the hydroprocessing activity of a representative model bio-oil compound (e.g., p-cresol) is presented. With water as solvent, Pt/C catalyst shows the highest activity and selectivity towards hydrocarbons (toluene and methylcyclohexane), followed by Pt/Al₂O₃, Pd and Ru catalysts. Calculations indicate that the reactions in aqueous phase are hindered by mass-transfer limitations at the investigated conditions. In contrast, with supercritical n-heptane as solvent at identical pressure and temperature, the reactant and H₂ are completely miscible and calculations indicate that mass-transfer limitations are eliminated. All the noble metal catalysts (Pt, Pd and Ru) show nearly total conversion but low selectivity to toluene in supercritical n-heptane. Further, conventional CoMo/Al₂O₃, NiMo/Al₂O₃ and NiW/Al₂O₃ catalysts do not show any hydrodeoxygenation activity in water, but in supercritical n-heptane, CoMo/Al₂O₃ shows the highest activity among the tested conventional catalysts with 97?% selectivity to toluene. Systematic parametric investigations with Pt/C and Pt/Al₂O₃ catalysts indicate that with water as the solvent, the reaction occurs in a liquid phase with low H₂ availability (i.e., low H₂ surface coverage) and toluene formation is favored. In supercritical n-heptane with high H₂ availability (i.e., high H₂ surface coverage), the ring hydrogenation pathway is favored leading to the high selectivity to 4-methylcyclohexanol. In addition to differences in H₂ surface coverage, the starkly different selectivities between the two solvents may also be due to the influence of solvent polarity on p-cresol adsorption characteristics.     

Homogeneous Catalytic Carbonylation and Hydroformylation for Synthesis of Industrial Chemicals

This brief review reports recent developments in homogeneous catalysis for synthesis of chemicals with a focus on new synthetic routes, clean catalytic alternatives and challenges in their industrial applications. Particularly, examples of hydroformylation, carbonylation, oxidative carbonylation and tandem synthetic approaches have been discussed. Challenges for future work and difficulties in commercialization are highlighted.     

Daily intake of manganese by the adult population of Mumbai

The daily intake of manganese (Mn) estimated through air, water and duplicate dietary analysis is found to range from 0.67 to 4.99 mg with a mean value of 2.21 mg. Ingestion through food contributed to the predominant fraction of the intake. The turnover rate of Mn through blood is approximately 2 h, based on the mean concentration of Mn in blood of 1.54 microg l(-1). The average concentrations of Mn in water and air were approximately 1.42 microg l(-1) and 37 ng m(-3), respectively. The daily intake of Mn by the adult population of Mumbai is closer to the lower bound of the recommended limit of 2-5 mg. Electro Thermal Atomic Absorption Spectrophotometry (ET-AAS), has been used for the determination of Mn in a variety of environmental and human biological fluids. The detection limit of Mn for a volume injection of 20 microl is 2 pg absolute. The precision of the method is established by analyzing a synthetic mixture containing various elements in different quantities (0.5-10 ppm) and is found to be within +/- 8%. The reliability of estimation is further assessed through the analysis of Standard Reference Materials (SRMs) of soil, hay, milk powder and fish tissue obtained from IAEA.     

Identification of FOPDT and SOPDT process dynamics using closed loop test

In this paper, identification of stable and unstable first order, second order overdamped and underdamped process dynamics with time delay is presented. Relay with hysteresis is used to induce a limit cycle output and using this information, unknown process model parameters are estimated. State space based generalized analytical expressions are derived to achieve accurate results. To show the performance of the proposed method expressions are also derived for systems with a zero. In real time systems, measurement noise is an important issue during identification of process dynamics. A relay with hysteresis reduces the effect of measurement noise, in addition a new multiloop control strategy is proposed to recover the original limit cycle. Simulation results are included to validate the effectiveness of the proposed method.