Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

Full-diversity, high-rate space-time block codes from division algebras

We present some general techniques for constructing full-rank, minimal-delay, rate at least one space-time block codes (STBCs) over a variety of signal sets for arbitrary number of transmit antennas using commutative division algebras (field extensions) as well as using noncommutative division algebras of the rational field /spl Qopf/ embedded in matrix rings. The first half of the paper deals with constructions using field extensions of /spl Qopf/. Working with cyclotomic field extensions, we construct several families of STBCs over a wide range of signal sets that are of full rank, minimal delay, and rate at least one appropriate for any number of transmit antennas. We study the coding gain and capacity of these codes. Using transcendental extensions we construct arbitrary rate codes that are full rank for arbitrary number of antennas. We also present a method of constructing STBCs using noncyclotomic field extensions. In the later half of the paper, we discuss two ways of embedding noncommutative division algebras into matrices: left regular representation, and representation over maximal cyclic subfields. The 4/spl times/4 real orthogonal design is obtained by the left regular representation of quaternions. Alamouti's (1998) code is just a special case of the construction using representation over maximal cyclic subfields and we observe certain algebraic uniqueness characteristics of it. Also, we discuss a general principle for constructing cyclic division algebras using the nth root of a transcendental element and study the capacity of the STBCs obtained from this construction. Another family of cyclic division algebras discovered by Brauer (1933) is discussed and several examples of STBCs derived from each of these constructions are presented.     

2-D symmetry: theory and filter design applications

In this comprehensive review article, we present the theory of symmetry in two-dimensional (2-D) filter functions and in 2-D Fourier transforms. It is shown that when a filter frequency response possesses symmetry, the realization problem becomes relatively simple. Further, when the frequency response has no symmetry, there is a technique to decompose that frequency response into components each of which has the desired symmetry. This again reduces the complexity of two-dimensional filter design. A number of filter design examples are illustrated.     

Useful NMR solvent mixture for polyesters: Trifluoroacetic acid-d/chloroform-d

Summary NMR spectra of high molecular weight polyesters such as polyglycolide (PG) and poly(ethylene terephthalate) (PET) have not been available because of low solubility in suitable NMR solvents. Although PG is not soluble enough at ambient temperatures for NMR spectra in either chloroform-d or trifluoroacetic acid-d alone, it dissolves readily to over 0.9% in a mixture of the two. At this concentration, ¹H and ¹³C spectra can be obtained on samples where end group signals are visible from which molecular weights can readily be determined. The solutions are stable up to at least four days when moisture is excluded. NMR spectra of PET can likewise be obtained at ambient temperatures in the solvent mixture which dissolves up to at least 0.6% of PET.     

Adaptive Spatial Partitioning for Multidimensional Data Streams

We propose a space-efficient scheme for summarizing multidimensional data streams. Our sketch can be used to solve spatial versions of several classical data stream queries efficiently. For instance, we can track ε-hot spots, which are congruent boxes containing at least an ε fraction of the stream, and maintain hierarchical heavy hitters in d dimensions. Our sketch can also be viewed as a multidimensional generalization of the ε-approximate quantile summary. The space complexity of our scheme is O((1/ε) log R) if the points lie in the domain [0, R]^d, where d is assumed to be a constant. The scheme extends to the sliding window model with a log (ε n) factor increase in space, where n is the size of the sliding window. Our sketch can also be used to answer ε-approximate rectangular range queries over a stream of d-dimensional points.     

Extending the color gamut and dynamic range of an sRGB image using a residual image

Image sources, such as digital camera captures and photographic negatives, typically have more information than can be reproduced on a photographic print or a video display. The information that is lost during the tone/color rendering process relates to both the extended dynamic range and color gamut of the original scene. In conventional photographic systems, most of this additional information is archived on the photographic negative and can be accessed by adjusting the way the negative is printed. However, most digital imaging systems have traditionally archived only a rendered video RGB image. As a result, it is not possible to make the same sorts of image manipulations that historically have been possible with conventional photographic systems. This suggests that there would be an advantage to storing images using an extended dynamic range/color gamut color encoding. However, because of file compatibility issues, digital imaging systems that store images using color encoding other than a standard video RGB representation (e.g., sRGB) would be significantly disadvantaged in the marketplace. In this article, we describe a solution that has been developed to maintain compatibility with existing file formats and software applications, while simultaneously retaining the extended dynamic range and color gamut information associated with the original scenes. With this approach, the input raw digital camera image or film scan is first transformed to the scene‐referred ERIMM RGB color encoding. Next, a rendered sRGB image is formed in the usual way and stored in a conventional image file (e.g., a standard JPEG file). A residual image representing the difference between the original extended dynamic range image and the final rendered image is formed and stored in the image file using proprietary metadata tags. This provides a mechanism for archiving the extended dynamic range/color gamut information, which is normally discarded during the rendering process, without sacrificing interoperability. Appropriately enabled applications can decode the residual image metadata and use it to reconstruct the ERIMM RGB image, whereas applications that are not aware of the metadata will ignore it and only have access to the sRGB image. The residual image is formed such that it will have negligible pixel values for those portions of the image that lie within the sRGB gamut, and will therefore be highly compressible. Tests on a population of 950 real customer images have demonstrated that the extended dynamic range scene information can be stored with an average file size overhead of about 8% compared to the sRGB images alone. © 2003 Wiley Periodicals, Inc. Col Res Appl, 28, 251–266, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10160     

An efficient TDMA start-up and restart synchronization approach for distributed embedded systems

A desired attribute in safety-critical embedded real-time systems is a system time and event synchronization capability on which predictable communication can be established. Focusing on bus-based communication protocols, we present a novel, efficient, and low-cost start-up and restart synchronization approach for TDMA environments. This approach utilizes information about a node's message length that forms a unique sequence to achieve synchronization such that communication overhead can be avoided. We present a fault-tolerant initial synchronization protocol with a bounded start-up time. The protocol avoids start-up collisions by deterministically postponing retries after a collision. We also present a resynchronization strategy that incorporates recovering nodes into synchronization.     

Defect-free sintering of two material powder injection molded components Part II Model

A defect-free, two-material component can be obtained via co-sintering by suitably altering the powder characteristics or compositions, as demonstrated in Part I. In this paper, a model to ascertain the suitability of material systems to be co-sintered without defects such as delamination or interface pores is presented. The model is based on the management of the stress induced due to the difference in shrinkage and an analysis of the in situ strength of the weaker material during sintering. Tool steel in combination with stainless steel admixed with boron and Fe-2Ni admixed with boron are two systems used to validate the model. The predictions of the model are in good agreement with the observations.     

Two-dimensional grain growth in rapidly solidified succinonitrile films

The kinetics and topological mechanisms of normal grain growth have been examined throughin situ dynamic studies on rapidly solidified succinonitrile (SCN). Thein situ studies allowed for continuous monitoring of the evolution of individual grains during growth. We have assessed the Mullins—Von Neumann topological grain growth law and the Burke—Turnbull parabolic rate law and have determined rate constants that describe grain growth. This work demonstrates that both laws are both obeyed globally and consistently. Thesein situ studies permit one to follow the unit operations associated with grain growth kinetics. This article demonstrates the usefulness of succinonitrile as a model analog system for studying grain growth. This article is based on a presentation made in the symposium “Fine Grains And Their Growth in Rapidly Solidified Materials,” TMS Materials Week ’93, Pittsburgh, PA, October 18–21, 1993.