Theoretical Prediction of Chiral 3D Hybrid Organic–Inorganic Perovskites

Hybrid organic–inorganic perovskites (HOIPs), in particular 3D HOIPs, have demonstrated remarkable properties, including ultralong charge‐carrier diffusion lengths, high dielectric constants, low trap densities, tunable absorption and emission wavelengths, strong spin–orbit coupling, and large Rashba splitting. These superior properties have generated intensive research interest in HOIPs for high‐performance optoelectronics and spintronics. Here, 3D hybrid organic–inorganic perovskites that implant chirality through introducing the chiral methylammonium cation are demonstrated. Based on structural optimization, phonon spectra, formation energy, and ab initio molecular dynamics simulations, it is found that the chirality of the chiral cations can be successfully transferred to the framework of 3D HOIPs, and the resulting 3D chiral HOIPs are both kinetically and thermodynamically stable. Combining chirality with the impressive optical, electrical, and spintronic properties of 3D perovskites, 3D chiral perovskites is of great interest in the fields of piezoelectricity, pyroelectricity, ferroelectricity, topological quantum engineering, circularly polarized optoelectronics, and spintronics.     

Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

Nitrogen addition to iron powder by mechanical alloying

Nitrogen was alloyed into iron (a) by mechanical processing in a nitrogen gas environment, and (b) by mechanically alloying with iron-nitride powders to characterize resulting nano-structure and nitrogen distribution. Although the infused nitrogen concentration was significantly greater than the thermodynamic equilibrium solubility of iron, no nitrides formed, even for nitrogen concentrations as high as 4.1 wt.% However, a bctFe phase did form. Lattice expansion calculations indicate that the sum of the interstitial bcc-Fe and bctFe nitrogen concentrations was significantly less than the total measured nitrogen concentration. A considerable portion of the mechanically infused nitrogen was determined to be associated with nanograin boundaries.     

A behavioral probe of the growth of intake potential during the inter-meal interval in the rat.

The rat's willingness to ingest glucose after an initial intraoral intake test was probed by beginning a 2nd intraoral intake test at variable durations (1–220 min). In Exp 1, after an initial meal of 12.5% glucose solution averaging 26.9?±?1.7 ml, the size of the 2nd (probe) meal of the same stimulus increased linearly from 4.0?±?0.9 ml after a 1-min delay to 15.4?±?2.7 ml after a 120-min delay. In Exp 2, intraoral intake of a more concentrated (37.5%) glucose solution rose more slowly as a function of delay from 2.4?±?2.7 ml to 4.9?±?0.6 ml. For each glucose concentration, the linear recovery function and a slope that depends on stimulus concentration are consistent with a role for gastric emptying during the delay in intake recovery. In Exp 3, rats ingested 12.5% or 37.5% glucose to satiety in an initial test and received, after a variable delay, either the same or the other concentration as the probe stimulus. The same volumes were ingested at each delay whether the glucose concentration of the probe stimulus was the same or was switched from that presented in the initial test. This result shows that the taste and caloric properties of the probe stimulus played no role in determining how much of it would be ingested… (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effect of melt spinning on the microstructure and mechanical properties of three Ni-base superalloys

A microstructural and mechanical analysis was performed on three rapidly solidified nickel base superalloys. Transmission and scanning electron microscopy along with tensile tests were performed on the ribbons in the as-cast and aged condition. This investigation permitted a correlation to be made between cooling rate, microstructure, and mechanical properties. It was found that melt spinning significantly altered the physical characteristics of the alloys studied. The rapid cooling rates (∼10⁷ K/s) produced ribbons with a low dislocation density and small (∼1 μm) low angle cells. The precipitation of γ′ was suppressed, producing alloys with a smaller volume fraction of precipitates and lower APBE than in the conventionally cast condition. Also, the matrix/precipitate lattice mismatch was higher in the melt spun foils. Tensile strengths were similar to those in the conventional form; however, no measurable ductility was present. Aging the ribbons resulted in increases in γ′ volume fraction, tensile strengths, APBE, and elongations compared to the as-cast ribbons. The results of this work suggest that many of the microstructural refinements produced by melt spinning are lost after a short aging time at moderate temperatures.     

Behavioral preferences in response to social injustice: The effects of group permeability and social identity salience.

Examined features of an intergroup context that can affect people's preferred responses to a situation of social injustice. 90 undergraduates were randomly assigned to 1 of 3 conditions of group permeability (open, token, or closed) and 1 of 2 conditions of social identity salience (not salient or salient). It was predicted on the basis of social identity theory that individualistic responses would be preferred to a collective response when group boundaries were more open but not when they were closed. It was also expected that under conditions of group impermeability, collective behavior would be preferred to a greater extent by individuals for whom social identity was salient than by individuals for whom it was not salient. The results, which generally supported these hypotheses, are discussed in terms of social psychological theories of intergroup relations and also with regard to their potential practical implications. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Intercalated clays from pentaerythritol stearate for use in polymer nanocomposites

Smectite clays treated with quaternary ammonium salts have been utilized for decades in paints, greases, cosmetics, and personal care products as rheological modifiers. They have also been used in industrial wastewater treatment extensively. In more recent times these surface modified clays have demonstrated benefits in polymer/clay nanocomposites. The use of quaternary ammonium modifiers limits the usefulness of these composites in food packaging because they are not approved for direct food contact. It would be advantageous to have surface modifying chemicals acceptable for direct food contact in these composites. This article reports research conducted on a promising surface modifier pentaerythritol stearate (PS), which is approved by the FDA for inclusion in food as a preservative. The surface modification of montmorillonite with PS is reported in detail as well as the production of nanocomposites with selected polymers made with the modified clay. Molecular modeling and purification of commercial PS samples indicate that the mono‐ and diesters are the critical surface modifiers, although the as received commercial material works well in forming intercalated clay complexes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The interactive editing and contouring of empirical fields

A system for the interactive editing and contouring of surfaces derived from empirical fields is described. The approach taken begins with the representation of a field as a general-order, nonuniform, tensor-product, B-spline surface. It provides an interactive display for editing the surface by control-vertex manipulation and a contouring algorithm that is specifically designed for the fast and robust contouring of B-spline surfaces. Interactive editing of the resulting model is feasible because of the local nature of editing changes when B-splines are used. The use of nonuniform B-splines gives the flexibility required to model highly irregular data efficiently     

SPATIAL AND VISUAL REASONING: HUMANS VERSUS LOGIC

Glasgow's revival of the "imagery debate" in computational terms provides a renewed opportunity to review the role of logical reasoning in general problem solving. Of special interest is the long-standing distinction between analogical or depictive problem representations, and the more abstract linguistic forms typified by traditional formal logic syntax.
In our brief statement, we recall that logical reasoning rests on semantics not syntax, and that the concepts of soundness, completeness, and consistency are manifest in both depictive and linguistic representations. We emerge with two conclusions: (1) enduring confusion regarding computational aspects of the "imagery debate" arise from long-standing confusion regarding key logical concepts, and related notions such as epistemological versus heuristic adequacy, logical versus probabilistic independence, and direct versus indirect representations; (2) the desire for depictive reasoning methods is ultimately motivated by human needs, not computational needs.