Data collection: evaluation of a pilot model

The overall purpose of this study was to explore nurses' feelings about the applicability and adequacy of a pilot model of nursing assessment (PMNA) developed for coronary care units (CCU) in order to obtain data that could help in establishing a definitive model. The evaluation, performed by 11 CCU nurses, showed that they considered the development and implementation of PMNA as valuable, and that its design was adequate for interviewing cardiac patients. These results will be employed in the elaboration of a definitive model of nursing assessment.     

Use of postconsumer polyethylene in blends with polyamide 6: Effects of the extrusion method and the compatibilizer

Blends of polyamide and high‐density polyethylene show adequate properties for a large range of applications: they are used for the production of filaments, containers, and molding resins. The effect of the addition of 2 wt % of a compatibilizer, maleic anhydride grafted polyethylene, to the blend was studied and compared to the use of postconsumer polyethylene. The samples were extruded with single‐ and twin‐screw extruders with 25, 50, or 75 wt % f polyethylene, and the test specimens, molded by injection, were characterized by stress–strain tests, thermal properties, and morphologies. Processing the blends with postconsumer polyethylene in both extruders improved the mechanical properties in comparison to the blends processed with high‐density polyethylene and the compatibilizer. The morphologies of these blends showed that there was a decrease in the domain size of the disperse phase with the use of the compatibilizer or postconsumer polyethylene. The results indicate that for this blend, postconsumer polyethylene substituted, with advantages, for the necessity of a compatibilizer and the use of the high‐density polyethylene. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008.     

Land Use Effect on the CN Model Parameters in a Tropical Dry Environment

Dry tropical forests account for over 1,000,000 km², and there is still lack of knowledge on their hydrologic processes. The curve number (CN) hydrologic model developed by the Natural Resources Conservation Service (NRCS) is widely applied for runoff determination in various parts of the world, but not so in tropical semiarid regions. This study analyzes the impact of land use changes on the CN model in a tropical semiarid environment, in two catchments of native dry tropical forest and thinned dry tropical forest land use from 2009 to 2012. The CN model was calibrated and validated for the NRCS recommended initial abstraction ratio λ = 0.2, and for λ evaluated from rainfall and runoff data. A reliability analysis was performed using Monte Carlo simulation. Model goodness-of-fit was assessed with statistical criteria. A total of 42 and 40 rainfall-runoff events were analyzed for the native and thinned dry tropical forest, respectively. Characteristic λ values of 0.15 and 0.11 were determined for the two respective catchments. Although CN values were similar for both land uses, CN_λ=0.20 = 80 and CN_{median λ} = 77, the thinned catchment showed a higher CN model parameters variability. The CN model was more sensitive to variations of CN values than to those of λ. This study showed that no matter the vegetation management in a dry tropical forest environment, modeled runoff is not affected by λ, but rather affected by CN, which represents soil, landuse and management.     

Performance of fluorine-added CoMoS/Al2O3 prepared by sonochemical and chemical vapor deposition methods in the hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

The performance of a new type of CoMoS/Al₂O₃ catalyst, with added fluorine and prepared by sonochemical and chemical vapor deposition (CVD) methods, was investigated in the hydrodesulfurization (HDS) of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The catalyst, which was designed to contain optimum amounts of fluorine and cobalt, exhibited a higher activity, ca. 4.6 times higher activity particularly in the HDS of 4,6-DMDBT, than a fluorine-free catalyst prepared by a conventional impregnation method. The enhanced activity of the new catalyst can be attributed to the cumulative effects of individual factors involved in the catalyst preparation. That is, the use of a sonochemical synthesis led to a high dispersion of small MoS₂ crystallites on the alumina, and the addition of the Co species to the catalyst by CVD caused a close interaction between the Co species and the MoS₂ crystallites to produce numerous CoMoS species, which are the catalytically active species for HDS. The addition of fluorine increased the amounts of acidic sites in the catalyst, which promoted hydrogenation (HYD) route to a greater extent than the direct desulfurization (DDS) route in DBT HDS and both HYD and DDS routes to similar extents in the case of 4,6-DMDBT HDS. Accordingly, the addition of fluorine led to a greater increase in catalytic activity for 4,6-DMDBT HDS than for DBT HDS.     

GraftFast Surface Engineering to Improve MOF Nanoparticles Furtiveness

Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL‐100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high‐resolution soft X‐ray spectroscopy. Finally, a cell penetration study using the radio‐labeled antitumor agent gemcitabine monophosphate (³H‐GMP)‐loaded MIL‐100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.     

Prediction of starting performance of synchronous motor by DC decaytesting method with the rotor in any arbitrary position

This paper presents a novel method to predict the starting performance of synchronous motors. This proposed strategy is based on a simple standstill response testing method using a small-capacity DC power supply unit, tentatively named the DC decay testing method in this paper, and can be applied to standstill synchronous motors with the rotor in any arbitrary position. The proposed testing method is carried out on a 10 kW, 200 V, 31.9 A, 50 Hz four-pole laminated salient-pole synchronous motor with damper windings. The results measured by on-load test and those predicted by the proposed method on starting performance clearly show the validity of the proposed method     

Pull-in-based μg-resolution accelerometer: Characterization and noise analysis

The pull-in time (t_pi) of electrostatically actuated parallel-plate microstructures enables the realization of a high-sensitivity accelerometer that uses time measurement as the transduction mechanism. The key feature is the existence of a metastable region that dominates pull-in behavior, thus making pull-in time very sensitive to external accelerations. Parallel-plate MEMS structures have been designed and fabricated using a SOI micromachining process (SOIMUMPS) for the implementation of the accelerometer. This paper presents the experimental characterization of the microdevices, validating the concept and the analytical models used. The accelerometer has a measured sensitivity of 0.25 μs/μg and a bandwidth that is directly related to the pull-in time, BW = 1/2t_pi ≈ 50 Hz. These specifications place this sensor between the state of the art accelerometers found both in the literature and commercially. More importantly, the resolution of the measurement method used is very high, making the mechanical-thermal noise the only factor limiting the resolution. The in-depth noise analysis to the system supports these conclusions. The total measured noise floor of 400 μg (100 μs) is mainly due to the contribution of the environmental noise, due to lack of isolation of the experimental setup from the building vibrations (estimated mechanical thermal noise of 2.8 μg/√Hz). The low requirements of the electronic readout circuit makes this an interesting approach for high-resolution accelerometers.     

An haptic-based immersive environment for shape analysis and modelling

Currently, the design of aesthetic products is a process that requires a set of activities where digital models and physical mockups play a key role. Typically, these are modified (and built) several times before reaching the desired design, increasing the development time and, consequently, the final product cost. In this paper, we present an innovative design environment for computer-aided design (CAD) surface analysis. Our system relies on a direct visuo-haptic display system, which enables users to visualize models using a stereoscopic view, and allows the evaluation of sectional curves using touch. Profile curves are rendered using an haptic device that deforms a plastic strip, thanks to a set of actuators, to reproduce the curvature of the shape co-located with the virtual model. By touching the strip, users are able to evaluate shape characteristics, such as curvature or discontinuities (rendered using sound), and to assess the surface quality. We believe that future computer-aided systems (CAS)/CAD systems based on our approach will contribute in improving the design process at industrial level. Moreover, these will allow companies to reduce the product development time by reducing the number of physical mockups necessary for the product design evaluation and by increasing the quality of the final product, allowing a wider exploration and comparative evaluation of alternatives in the given time.     

Is team training in briefings for surgical teams feasible in simulation?

We developed a module for surgical team training using briefings in simulated crisis scenarios and here we report preliminary findings. Nine surgical teams (34 trainees) participated in a pre-training simulation, followed by an interactive workshop on briefing and checklists, and then a post-training simulation. Both technical and non-technical skills were assessed via observation during simulations by expert trainers who provided feedback on performances at the end of simulation. Trainees also reported their attitudes to briefings and evaluated the training. Pre-training attitudes to briefing were positive, some of which improved post-training and trainees’ evaluation of the training was positive. Surgeons’ technical skill improved significantly post-training, but their decision-making skill was rated lower than other non-technical skills, compared to other trainees. The training did not appear to greatly improve non-technical skill performance. Training surgical teams in simulation is feasible but much more work is needed on measurement development and training strategy to confirm its efficacy and utility.