A 0.9 V 92 dB Double-Sampled Switched-RC Delta-Sigma Audio ADC

A 0.9 V third-order double-sampled delta-sigma audio ADC is presented. A new method using a combination of a switched-RC technique and a floating switched-capacitor double-sampling configuration enabled low-voltage operation without clock boosting or bootstrapping. A three-level quantizer with simple dynamic element matching was used to improve linearity. The prototype IC implemented in a 0.13 CMOS process achieves 92 dB DR, 91 dB SNR and 89 dB SNDR in a 24 kHz audio signal bandwidth, while consuming 1.5 mW from a 0.9 V supply. The prototype operates from 0.65 V to 1.5 V supply with minimal performance degradation.     

Apoptotic Effects of Anthocyanins from Vitis coignetiae Pulliat Are Enhanced by Augmented Enhancer of the Rudimentary Homolog (ERH) in Human Gastric Carcinoma MKN28 Cells

Evidence suggests that augmented expression of a certain gene can influence the efficacy of targeted and conventional chemotherapies. Here, we tested whether the high expression of enhancer of the rudimentary homolog (ERH), which serves as a prognostic factor in some cancers, can influence the efficacy of anthocyanins isolated from fruits of Vitis coignetiae Pulliat, Meoru in Korea (AIMs) on human gastric cancer cells. The anticancer efficacy of AIMs was augmented in ERH-transfected MKN28 cells (E-MKN28 cells). Molecularly, ERH augmented AIM-induced caspase-dependent apoptosis by activating caspase-3 and -9. The ERH-augmented apoptotic effect was related to mitochondrial depolarization and inhibition of antiapoptotic proteins, XIAP, and Bcl-2. In addition, reactive oxygen species (ROS) generation was augmented in AIMs-treated E-MKN28 cells compared to AIMs-treated naïve MKN28 cells. In conclusion, ERH augmented AIM-induced caspase-dependent mitochondrial-related apoptosis in MKN28 cells. A decrease in expression of Bcl-2 and subsequent excessive ROS generation would be the mechanism for ERH-augmented mitochondrial-related apoptosis in AIMs-treated MKN28 cells. A decrease in expression of XIAP would be another mechanism for ERH-augmented caspase-dependent apoptosis in AIMs-treated MKN28 cells.     

The effect of hydrogen bonding on the phase behavior of poly(ethylene-co-acrylic acid)-ethylene-cosolvent mixtures at high pressures

Experimental cloud-point data to 260 °C and 2,500 bar are reported to demonstrate the impact of two cosolvents, acetone and methanol, on the phase behavior of polyethylene, poly(ethylene-co-2.4 mol% acrylic acid) (EAA_2.4), poly(ethylene-co-3.9 mol% acrylic acid) (EAA_3.9), poly(ethylene-co-6.9 mol% acrylic acid) (EAA_6.9), and poly(ethylene-co-9.2 mol% acrylic acid) (EAA_9.2) in ethylene. In pressure-temperature (P-T) space, the miscibility of EAA copolymers in ethylene decreases significantly with temperature and with increasing acrylic acid content of EAA due to self-association of the acrylic acid segments. Acetone and methanol, both dramatically enlarge the solubility of EAA copolymers due to the hydrogen bonding with acrylic acids in the EAA. At low concentrations, methanol is a better cosolvent than acetone. However, the impact of methanol diminishes rapidly with increasing methanol concentration once all the acrylic acids in the EAA are hydrogen bond with methanol molecules.     

Ultrasonic spray pyrolysis of nano crystalline spinel LiMn2O4 showing good cycling performance in the 3 V range

Spherical lithium manganese oxide spinel was synthesized by an ultrasonic spray pyrolysis method, and has been characterized using X-ray diffraction, scanning electron microscopy, transimission electron microscopy and electrochemical cycling at 3 V regions. The LiMn₂O₄ powders were composed of about 10 nm-sized primary particles. The delivered discharge capacity of the synthesized nano-material was 125 mAh g⁻¹ between 2.4 and 3.5 V and its retention was about 96% upon 50 cycling. From the high resolution transmission electron microscopic study, it was found that structural transition of the parent material did not occur even after the 50th electrochemical cycling on the 3 V region. It seems that the reversible structural change is possible for nanocrystalline LiMn₂O₄ as observed by the X-ray diffraction and transition electron microscopic observations.     

Study on photocatalysis of TiO 2 nanotubes prepared by methanol-thermal synthesis at low temperature

TiO₂ nanotubes were synthesized by the solvothermal process at low temperature in a highly alkaline water–methanol mixed solution. Their characteristics were identified by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), specific surface area (BET), Fourier transform infrared spectroscopy (FTIR) and UV–Vis absorption spectroscopy. The as-prepared samples were tested by the photodegradation reaction of methylene blue (MB) dye under visible-light irradiation. The ratios of methanol and water, as well as calcination temperature, affected the morphology, nanostructure and photocatalytic performance. The methanol solvent plays an important role in improving crystallization of the anatase phase, which affects the photocatalytic reaction. Titanate nanotubes were synthesized in methanol–water volume ratios of 10:90, 20:80 and 30:70 which still had high absorbability. Titania nanotubes formed at a calcination temperature of 300 °C using methanol–water volume ratio of 30:70 showed highest photocatalytic performance, much higher than that using water solvent and TiO₂–P25 powder.     

Blood flow interpretation in femoral pseudoaneurysm

A femoral artery pseudoaneurysm is one complication of vascular intervention, and the incidence is increasing. Early management is then needed to avoid potential dangers from it. It differs from a true aneurysm in that it doesn＇t include any component of the vascular wall, and is not studied as much as a true aneurysm. Here, a model of a femoral pseudoaneurysm was made and a Computational Fluid Dynamics（CFD） simulation was verified with PIV experiment. Afterwards, a CFD simulation with two different models was performed to look for any findings which may help in developing new treatment methods.     

Effect of nanoparticle surface functionality on microdomain orientation in block copolymer thin films under electric field

The electric field induced microdomain orientations has been an interesting research topic. In this article, the effect of nanoparticle surface functionality on microdomain alignments in block copolymer/nanoparticle hybrid thin films was investigated with transmission electron microscopy experiments. The presence of gold nanoparticles influenced the microdomain orientation behaviors of block copolymer/nanoparticle thin films. The possibility for complete alignment normal to the substrate was illustrated by controlling electric field strength, concentration, and surface ligands of nanoparticles. This work provides basic and essential data to understand the properties and behaviors of emerging block copolymer/nanoparticle hybrid thin films.     

Production and Characterization of Branched Oligosaccharides from Liquefied Starch by the Action of B. Licheniformis Amylase

A branched oligosaccharides (BOS) mixture was produced from liquefied starch solution using a maltogenic amylase of Bacillus licheniformis (BLMA). The BOS mixture was produced by both α-1,4-bond hydrolyzing and α-1,6-transglycosylation activities of BLMA, and it contained 58.3% of various branched oligosaccharides. Small branched oligosaccharides such as isomaltose, isopanose, and panose were identified in the mixture by various analyses including high performance ion-chromatography (HPIC). Major branched DP4 and DP5 molecules in the mixture were determined as 6²-O-α-maltosylmaltose, 6³-O-α-maltosyl-maltotriose and 6²-O-α-maltotriosyl-maltose, respectively. Time course study of BOS production suggested that the hydrolysis and transglycosylation reactions catalyzed by BLMA were coupled. BLMA was likely to transfer a sugar moiety hydrolyzed from a non-reducing end of maltooligosaccharide, mainly maltose, to another moiety of sugar via the formation of α-1,6-linkage. Immobilization of BLMA was attempted as an effort to achieve a continuous process for BOS production. the immobilized enzyme showed improved thermal stability and slight loss of enzyme activity was observed during repeated usage.     

Etching characteristics of thin SiON films using a liquefied perfluorocarbon precursor of C6F12O with a low global warming potential

Perfluorocarbon gas is widely used in the semiconductor industry. However, perfluorocarbon has a negative effect on the global environment owing to its high global warming potential (GWP) value. An alternative solution is essential. Therefore, we evaluated the possibility of replacing conventional perfluorocarbon etching gases such as CHF₃ with C₆F₁₂O, which has a low GWP and is in a liquid state at room temperature. In this study, silicon oxynitride (SiON) films were plasma-etched using inductively coupled CF₄ +C₆F₁₂O+O₂ mixed plasmas. Subsequently, the etching characteristics of the film, such as etching rate, etching profile, selectivity over Si, and photoresist, were investigated. A double Langmuir probe was used and optical emission spectroscopy was performed for plasma diagnostics. In addition, a contact angle goniometer and x-ray photoelectron spectroscope were used to confirm the change in the surface properties of the etched SiON film surface. Consequently, the etching characteristics of the C₆F₁₂O mixed plasma exhibited a lower etching rate, higher SiON/Si selectivity, lower plasma damage, and more vertical etched profiles than the conventional CHF₃ mixed plasma. In addition, the C₆F₁₂O gas can be recovered in the liquid state, thereby decreasing global warming. These results confirmed that the C₆F₁₂O precursor can sufficiently replace the conventional etching gas.