Effects of Seismically Induced Pounding at Expansion Joints of Concrete Bridges

This paper presents the result of a study on the effect of pounding at expansion joints on concrete bridge response to earthquake ground motions. An engineering approach, rather than continuum mechanics approach, is emphasized. First, the dynamic behavior of a damped multidegree-of-freedom bridge system separated by an expansion joint involving an impact is examined by means of the finite element method. Second, the sensitivity analysis of the stiffness in gap elements is performed. Third, usefulness of the analysis method for simulation of pounding phenomena is demonstrated and the effect of pounding on the ductility demands measured in terms of the rotation of column ends is investigated. Two-dimensional finite element analysis using a bilinear hysterestic model for bridge substructure joints and a nonlinear gap element for the expansion joint is performed on a realistic bridge with an expansion joint. The effects of the primary factors on the ductility demand such as gap sizes and characteristics of earthquake ground motion are investigated through a parametric study. The major conclusions are (1) the effect of impact most directly depends on the size of momentum (or pounding magnitude); and (2) the pounding effect is generally found to be negligible on the ductility demand for wide practical ranges of gap size and peak ground acceleration, but is potentially significant at the locations of impact.     

A practical SPICE model based on the physics and characteristics of realistic single-electron transistors

A practical model for a single-electron transistor (SET) was developed based on the physical phenomena in realistic Si SETs, and implemented into a conventional circuit simulator. In the proposed model, the SET current calculated by the analytic model is combined with the parasitic MOSFET characteristics, which have been observed in many recently reported SETs formed on Si nanostructures. The SPICE simulation results were compared with the measured characteristics of the Si SETs. In terms of the bias, temperature, and size dependence of the realistic SET characteristics, an extensive comparison leads to good agreement within a reasonable level of accuracy. This result is noticeable in that a single set of model parameters was used, while considering divergent physical phenomena such as the parasitic MOSFET, the Coulomb oscillation phase shift, and the tunneling resistance modulated by the gate bias. When compared to the measured data, the accuracy of the voltage transfer characteristics of a single-electron inverter obtained from the SPICE simulation was within 15%. This new SPICE model can be applied to estimating the realistic performance of a CMOS/SET hybrid circuit or various SET logic architectures.     

Synthesis of silver/polymer colloidal composites from surface-functional porous polymer microspheres

This study presents a different colloidal silver (Ag)/polymer system where Ag nanoparticles are deposited uniformly onto surface-functional porous poly(ethylene glycol dimethacrylate-co-acrylonitrile) (poly(EGDMA-co-AN)) microspheres. The formation and morphology of the composite microspheres were characterized from electron microscopy and X-ray diffraction analyses. The significance of the present report is that owing to the high affinity between Ag and nitrile group (CN) on the large surface of the microspheres, the Ag nanoparticles having a face-centered cubic phase were incorporated evenly into the deep pores of the microspheres with fine size and size distribution. In the preservation test, the Ag/poly(EGDMA-co-AN) composite microspheres obtained showed an excellent anti-bacterial performance, elucidating a high applicability for a new preservative.     

Growth and formation mechanism of sea urchin-like ZnO nanostructures on Si

Sea urchin-like nanostructures of ZnO consisting of ZnO nanowires with blunt faceted ends were grown on Si (100) substrates by oxidation of metallic Zn at 600 °C. ZnO nanowires having a diameter of 30–60 nm and length of 2–4 Μm were in similar shape with uniform diameter along its entire length with well faceted blunt ends. X-ray diffraction and transmission electron microscope analysis showed that the as-grown nanostructures were highly crystalline with wurtzite hexagonal structure having lattice constants of a=b=3.25 å and c=5.21 å. Room temperature photoluminescence (PL) measurements showed a weak near band-edge emission at 380 nm, but a strong green emission at 500–530 nm. A model for vapor-solid (VS) growth mechanism of ZnO nanowires was presented, in which nucleation of ZnO is crucial for the growth of the nanostructures.     

Application of a fibre-reactive chitosan derivative to cotton fabric as a zero-salt dyeing auxiliary

Cotton fabric has been treated with a fibre-reactive chitosan derivative containing quaternary ammonium groups, O -acrylamidomethyl- N -[(2-hydroxy-3-trimethylammonium)propyl]chitosan chloride (NMA-HTCC). Cotton treated with NMA-HTCC has been dyed with direct and reactive dyes without the addition of salt. The colour yield was higher than that on untreated cotton, despite the addition of a large amount salt in the latter case. After dyeing, cotton treated with NMA-HTCC gave better wash fastness than the untreated cotton. The light fastness was however inferior to that on untreated cotton. The antimicrobial activity of cotton treated with NMA-HTCC against Staphylococcus aureus was considerably lower after dyeing, probably due to the antimicrobial effect of the cationic group on NMA-HTCC being blocked by its combination with the anionic dye.     

Virtual target tracking of mobile robot and its application to formation control

A virtual target tracking approach is proposed for kinematic control of mobile robot. In the controller, linear and angular velocity inputs are generated by using the local data of robot position and orientation along with the estimated velocity of target object. Applying the proposed approach to a cooperative robot group with arbitrary number of multiple mobile robots, it is possible to create various robot formations for cooperative navigation and tracking of moving object. The developed controller is shown to be stable and convergent through theoretical proof and a series of experiments.     

Prediction model for surface temperature of roller and densification of iron powder during hot roll pressing

The hot roll pressing of iron powder with several rotating speeds was carried out on a pilot-plant scale. From these experiments, it was confirmed that the surface temperature of roller was increased with increasing its rotating speed. It was also known that the heat transfer coefficient between the iron powder and the roller surface is closely related with the rotating speed of roller. These results were quantitatively described by using a mathematical model which was derived based on the steady-state heat transfer during hot roll pressing. In addition, the densification behavior of iron powder during the hot roll pressing was simulated by a finite element model based on the arbitrary Lagrangian and Eulerian (ALE) method and a yield criterion for metal powder. From these models, the maximum critical rotating speed of roller during the hot roll pressing, in which the roller could hold out against the thermal fracture, could be determined.     

Tilt detection and servo control method for the holographic data storage system

Recently photopolymer with disk type substrate is selected as a media of the holographic data storage system. Because shape of the media is a disk, a disk tilt must be occur when the media rotates. When disk tilt occurs the angle between the reference beam and the media is changed by the tilt, thus the data can not be recorded with a right angle or another data page is retrieved. The holographic data storage system is very weak to the tilt disturbance by the Bragg effect, therefore it is necessary to detect the disk tilt angle and compensate it. In this study, we measure the amount of the tilt error using external photo detector and compensate it by rotating the angle of galvano mirror with our own algorithm.     

Fabrication of Er3+/Pr3+ Co-doped soda-lime glass thin films using RF magnetron sputtering method and optical property characterization

Er^3+/Pr³⁺ co-doped soda-lime glass thin films have been fabricated using RF magnetron sputtering method and their structural and optical properties have been studied. Deposition rate, crystallinity, and composition of glass thin films were investigated by scanning electron microscopy, transmission electron microscopy, and electron probe micro area analysis. Refractive index, birefringence and binding characteristics have been investigated using a prism coupler and X-ray photoelectron spectroscopy. Er³⁺/Pr³⁺ co-doped soda lime glass thin films were prepared by changing substrate temperature (room temp. ∼550^∘C), RF power (90 W–130 W), and Ar/O₂ gas flow ratio at processing pressure of 4 mTorr. Glass thin films could be obtained at the optimized processing condition at 350^∘C, RF power of 130 W, and gas flow of Ar:O₂ = 40:0 with maximum deposition rate of 1.6 μm/h. Refractive index and birefringence increased from 1.5614 to 1.5838 and from 0.000154 to 0.000552, respectively, as the content of Pr³⁺ increased. Binding energy of Pr3d also increased as the content of Pr³⁺ increased.