Scanning electron microscopy of the myosin-coated surface of polystyrene beads in a force-movement assay system for ATP-dependent actin-myosin sliding

An outbreak of Cryptosporidiosis occurred over three months in a British Columbia community, peaking in December 1990. Results of the case-control study and illness surveys support the hypothesis that transmission occurred in a public children's pool at the local recreation centre. Analysis using lab-confirmed cases revealed a matched odds ratio of 4.5 [95% CI 0.97, 20.83], and using clinical cases an unmatched odds ratio of 12.8 [95% CI 3.68, 46.77], associated with swimming in the children's pool within two weeks prior to onset of illness. Other risk factors were not significant. Attack rates in various groups of children's pool users ranged from 8% to 78%. The children's pool was closed for steam cleaning and disinfection. Unusually frequent defecations including liquid stools had occurred before and during the outbreak. Improvements were instituted for removal of feces and superchlorination of pool water.     

Highly reliable a‐IGZO TFTs on a plastic substrate for flexible AMOLED displays

We have successfully reduced threshold voltage shifts of amorphous In–Ga–Zn–O thin‐film transistors (a‐IGZO TFTs) on transparent polyimide films against bias‐temperature stress below 100 mV, which is equivalent to those on glass substrates. This high reliability was achieved by dense IGZO thin films and annealing temperature below 300 °C. We have reduced bulk defects of IGZO thin films and interface defects between gate insulator and IGZO thin film by optimizing deposition conditions of IGZO thin films and annealing conditions. Furthermore, a 3.0‐in. flexible active‐matrix organic light‐emitting diode was demonstrated with the highly reliable a‐IGZO TFT backplane on polyimide film. The polyimide film coating process is compatible with mass‐production lines. We believe that flexible organic light‐emitting diode displays can be mass produced using a‐IGZO TFT backplane on polyimide films.     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

The Roles of 3- and 4-Isopropylbiphenyls in the Isopropylation of Biphenyl over a H-Mordenite

The isopropylation of mixtures of 3- and 4-isopropylbiphenyls (3- and 4-IPBPs) was examined over a dealuminated H-mordenite (HM) to elucidate the role of 3- and 4-IPBPs in the isopropylation of biphenyl (BP). 4-IPBP was consumed much faster than 3-IPBP in all cases. 4-IPBP was an exclusive precursor to diisopropylbiphenyls (DIPBs), particularly 4,4-DIPB, and 4,4-DIPB was found in encapsulated products during the reaction. These results show that 4-IPBP can allow establishment of an active complex with propylene and acid site in HM pores, whereas 3-IPBP cannot. It is concluded that the isopropylation of BP over HM occurs through a reactant selectivity mechanism, and through a restricted transition state mechanism, but not through a product selectivity mechanism.     

Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Synthesis of AlPO4 Molecular Sieves with AFI and AEL Structures by Dry-Gel Conversion Method and Catalytic Application of Their SAPO Counterparts on Isopropylation of Biphenyl

AlPO₄-5 and AlPO₄-11 were synthesized by dry-gel conversion (DGC) method. Steam-assisted conversion (SAC) and vapor-phase transport (VPT) techniques were applied for this purpose. The synthesis was successful in presence of a certain minimum amount of external bulk water, without which the crystallization failed. Crystallization by VPT method was slower than corresponding SAC and HTS method. SAPO analogs of the samples, SAPO-5 and SAPO-11 were also synthesized by DGC method. Samples made by DGC methods had higher yield than the conventional hydrothermal synthesis (HTS); otherwise the samples showed similar characteristics as that made by HTS. XRD, SEM and N₂-adsorption results showed high crystallinity and purity of the samples made by DGC, and ²⁷Al MAS NMR spectra indicated the tetrahedral framework nature of Al. SAPO-5 and SAPO-11 were tested for their catalytic activity in isopropylation of biphenyl, and in terms of conversion and selectivity, SAPO-5 was found to be suitable for this application.     

考虑寄生电感的谐振开关电容变换器电压尖峰抑制

基于碳化硅(SiC)器件的谐振开关电容变换器(RSCC)因其软开关特性,适用于高频、高功率密度的场合.但是较高的工作频率使其对线路寄生参数较敏感,易造成开关器件的电压尖峰问题.通过分析RSCC叠层母排模型,该文建立含有寄生电感的等效电路,研究寄生电感对电路运行模态的影响,并推导开关器件电压峰值与寄生电感之间的关系.在此基础上,提出优化叠层母排结构和吸收电容的电压尖峰抑制方案,仿真及实验结果验证了该文电压尖峰抑制方案的有效性和可行性.     

Touch‐screen panel integrated into 12.1‐in. a‐Si:H TFT‐LCD

Abstract— A touch‐screen‐panel (TSP) embedded 12.1‐in. LCD employing a standard existing a‐Si:H TFT‐LCD process has been successfully developed. Compared with conventional external touch‐screen panels, which use additional components to detect touch events, the new internal TSP exhibits a clearer image and improved touch feeling, as well as increased sensing speed using discrete sensing lines to enable higher‐speed sensing functions including handwriting. The new internal digital switching TSP can be fabricated with low cost because it does not require any additional process steps compared to a standard a‐Si:H TFT‐LCD.