A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings

Approximately 1.5 μm thick CrN and CrAlN coatings were deposited on silicon and mild steel substrates by reactive direct current (DC) magnetron sputtering. The structural and mechanical properties of the coatings were characterized using X-ray diffraction (XRD) and nanoindentation techniques, respectively. The bonding structure of the coatings was characterized by X-ray photoelectron spectroscopy (XPS). The surface morphology of the coatings was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The XRD data showed that the CrN and CrAlN coatings exhibited B1 NaCl structure. Nanoindentation measurements showed that as-deposited CrN and CrAlN coatings exhibited a hardness of 18 and 33 GPa, respectively. Results of the surface analysis of the as-deposited coatings using SEM and AFM showed a more compact and dense microstructure for CrAlN coatings. The thermal stability of the coatings was studied by heating the coatings in air from 400 to 900 °C. The structural changes as a result of heating were studied using micro-Raman spectroscopy. The Raman data revealed that CrN coatings got oxidized at 600 °C, whereas in the case of CrAlN coatings, no detectable oxides were formed even at 800 °C. After annealing up to 700 °C, the CrN coatings displayed a hardness of only about 7.5 GPa as compared to CrAlN coatings, which exhibited hardness as high as 22.5 GPa. The potentiodynamic polarization measurements in 3.5% NaCl solution indicated that the CrAlN coatings exhibited superior corrosion resistance as compared to CrN coatings.     

Feature Selection for Detecting ICMPv6-Based DDoS Attacks Using Binary Flower Pollination Algorithm

Internet Protocol version 6 (IPv6) is the latest version of IP that goal to host 3.4 × 10³⁸ unique IP addresses of devices in the network. IPv6 has introduced new features like Neighbour Discovery Protocol (NDP) and Address Auto-configuration Scheme. IPv6 needed several protocols like the Address Auto-configuration Scheme and Internet Control Message Protocol (ICMPv6). IPv6 is vulnerable to numerous attacks like Denial of Service (DoS) and Distributed Denial of Service (DDoS) which is one of the most dangerous attacks executed through ICMPv6 messages that impose security and financial implications. Therefore, an Intrusion Detection System (IDS) is a monitoring system of the security of a network that detects suspicious activities and deals with a massive amount of data comprised of repetitive and inappropriate features which affect the detection rate. A feature selection (FS) technique helps to reduce the computation time and complexity by selecting the optimum subset of features. This paper proposes a method for detecting DDoS flooding attacks (FA) based on ICMPv6 messages using a Binary Flower Pollination Algorithm (BFPA-FA). The proposed method (BFPA-FA) employs FS technology with a support vector machine (SVM) to identify the most relevant, influential features. Moreover, The ICMPv6-DDoS dataset was used to demonstrate the effectiveness of the proposed method through different attack scenarios. The results show that the proposed method BFPA-FA achieved the best accuracy rate (97.96%) for the ICMPv6 DDoS detection with a reduced number of features (9) to half the total (19) features. The proven proposed method BFPA-FA is effective in the ICMPv6 DDoS attacks via IDS.     

Intrusion Detection Systems Using Blockchain Technology: A Review,Issues and Challenges

Intrusion detection systems that have emerged in recent decades can identify a variety of malicious attacks that target networks by employing several detection approaches. However, the current approaches have challenges in detecting intrusions, which may affect the performance of the overall detection system as well as network performance. For the time being, one of the most important creative technological advancements that plays a significant role in the professional world today is blockchain technology. Blockchain technology moves in the direction of persistent revolution and change. It is a chain of blocks that covers information and maintains trust between individuals no matter how far apart they are. Recently, blockchain was integrated into intrusion detection systems to enhance their overall performance. Blockchain has also been adopted in healthcare, supply chain management, and the Internet of Things. Blockchain uses robust cryptography with private and public keys, and it has numerous properties that have leveraged security’s performance over peer-to-peer networks without the need for a third party. To explore and highlight the importance of integrating blockchain with intrusion detection systems, this paper provides a comprehensive background of intrusion detection systems and blockchain technology. Furthermore, a comprehensive review of emerging intrusion detection systems based on blockchain technology is presented. Finally, this paper suggests important future research directions and trending topics in intrusion detection systems based on blockchain technology.     

Optical detection of CA 15.3 breast cancer antigen using CdS quantum dot

The present study focus on optical sensing of breast cancer antigen 15.3 (CA 15.3) using cadmium sulphide quantum dot (CdS‐QD) in saline and serum samples spiked with antigen. The surface of CdS‐QD was modified by cysteamine capping followed by tagging of CA 15.3 antibody. The samples were characterised using UV‐visible absorption spectroscopy (UV‐VIS Spectroscopy), Fourier transform infrared spectroscopy (FTIR), high‐resolution transmission electron microscopy (HRTEM) attached with energy‐dispersive X‐ray spectroscopy, phase contrast inverted epi‐fluorescence microscopy and photoluminescence (PL) spectrophotometry (EDS). The CdS‐QD showed a mean diameter of 3.02 ± 0.6 nm. The complex formed after antigen‐antibody interaction resulted in distinguishable optical and fluorescence intensity with respect to varying concentration of antigen. The PL study revealed that CA 15.3 antibody labelled CdS QD can detect CA 15.3 tumour marker even at very low concentration of 0.002 KU/L with a constant response time of 15 min. This study clearly indicates that detection of CA 15.3 at low concentration is possible using surface modified CdS QD in serum samples and can find immense applications in biosensor development for detection of breast cancer marker similar to various automated detection kits available in market.Inspec keywords: semiconductor quantum dots, cadmium compounds, II‐VI semiconductors, wide band gap semiconductors, cancer, tumours, optical sensors, biosensors, biomedical equipment, visible spectra, ultraviolet spectra, Fourier transform infrared spectra, transmission electron microscopy, X‐ray chemical analysis, fluorescence, optical microscopy, photoluminescence, proteins, molecular biophysics, nanosensors, nanomedicine, nanoparticlesOther keywords: optical detection, CA 15.3 breast cancer antigen, optical sensing, cadmium sulphide quantum dot, saline samples, serum samples, cysteamine capping, CA 15.3 antibody, UV‐visible absorption spectroscopy, Fourier transform infrared spectroscopy, high‐resolution transmission electron microscopy, energy dispersive X‐ray spectroscopy, phase contrast inverted epifluorescence microscopy, photoluminescence spectrophotometry, antigen‐antibody interaction, fluorescence intensity, optical intensity, CA 15.3 tumour marker, surface modified CdS QD, biosensor development, time 15 min, CdS     

Synthesis of Co3 O4 /graphene nanocomposite using paraffin wax for adsorption of methyl violet in water

This study discusses the use of Co₃ O₄ impregnated graphene (CoOIG) as an efficient adsorbent for the removal of methyl violet (MV) dye from wastewater. CoOIG nanocomposites have been prepared by pyrolyzing paraffin wax with cobalt acetate. The synthesised nanocomposite was characterised by X‐ray diffraction, field emission scanning electron microscope, transmission electron microscope, Fourier transform infrared spectroscope, Raman spectroscopy, and Brunauer–Emmett–Teller isotherm studies. The above studies indicate that the composites have cobalt oxide nanoparticles of size 51–58 nm embedded in the graphene nanoparticles. The adsorption studies were conducted with various parameters, pH, temperature and initial dye concentration, adsorbent dosage and contact time by the batch method. The adsorption of MV dye by the adsorbent CoOIG was about 90% initially at 15 min and 98% dye removal at pH 5. The data were fitted in Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich and Sips isotherm models. Various thermodynamic parameters like Gibbs free energy, enthalpy, and entropy of the on‐going adsorption process have also been calculated.Inspec keywords: cobalt compounds, graphene, nanoparticles, nanocomposites, nanofabrication, adsorption, dyes, scanning electron microscopy, field emission electron microscopy, transmission electron microscopy, Raman spectra, Fourier transform infrared spectra, free energy, enthalpy, entropyOther keywords: nanocomposite, paraffin wax, adsorption, methyl violet dye, water, X‐ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, Brunauer‐Emmett‐Teller isotherm, cobalt oxide nanoparticles, graphene nanoparticles, thermodynamic parameters, Gibbs free energy, enthalpy, entropy, Co₃ O₄ ‐C     

Synthesis,structural and optical properties of Er doped,Li doped and Er + Li co-doped ZnO nanocrystallites by solution-combustion method

Pure zinc oxide (ZnO) and 2 mol% of Er, 1 mol% of Li individually doped and Er + Li co-doped ZnO nanopowders were synthesized by auto-combustion method. Crystal structure and grain size were characterized by X-ray diffractometer and found that all synthesized samples have hexagonal wurtzite crystal structure. Scanning electron microscope (SEM) and Transmission electron microscope (TEM) studies were used to determine the morphology and size of the nanocrystallites. A UV–VIS measurement shows four absorbance peaks in the visible regions and the band gap is slowly blue shifted after annealing at 800 °C. The presence of Er, Li and the hexagonal wurtzite structure was confirmed by FT-IR studies. FT-Raman spectroscopy has been employed to study the crystalline quality and structural disorders.     

Effect of physical and chemical modifications on microcrystalline parameters of silk fibers

Wide-angle X-ray diffraction studies of physically and chemically treated silk fibers like bivoltine mulberry silk and tassar silk were carried out to evaluate their crystal size, lattice distortion, and minimum enthalpy, as these determine the properties of silk fibers. The results are also compared with tenacity measurement. © 1996 John Wiley & Sons, Inc.     

Ionic conductivity studies and dielectric studies of Poly(styrene sulphonic acid)/starch blend polymer electrolyte containing LiClO4

Proton and lithium-ion conducting biodegradable solid polymer electrolytes were prepared using blends of poly(styrene sulphonic acid) (PSSA) and starch for supercapacitor applications. The ionic conductivities have been calculated using the bulk impedance obtained through impedance spectroscopy with varying blend ratio and plasticizer. Glycerol as plasticizer improved the film formation property, while lithium perchlorate (LiClO₄) as dopant enhanced the conductivity. The maximum conductivity has been found to be 5.7?×?10^?3?Scm^?1 at room temperature for 80/20 (PSSA/starch) blend ratio. The dielectric studies showed relaxation peaks indicating proton and Li⁺ conduction in the plasticized polymer blend matrix and dielectric modulus also exhibited a long tail feature indicating good capacitance. Differential scanning calorimetry thermograms showed two peaks and decreased with varying blend ratio and plasticizer. A carbon?Ccarbon supercapacitor was fabricated using suitable electrolyte, and its electrochemical characteristics using cyclic voltammetry, AC impedance and galvanostatic charge?Cdischarge were studied. Supercapacitor showed a fairly good specific capacitance of 115?Fg^?1 at 10?mV s^?1.