Subject-based extraction of a latent blog community

In the blogosphere, there exist posts relevant to a particular subject and blogs that show interest in the subject. In this paper, we define a set of such posts and blogs as a blog community and propose a method for extracting the blog community associated with a particular subject. The proposed method is based on the idea that the blogs who have performed actions (e.g., read, comment, trackback, scrap) to the posts of a particular subject are the ones with interest in the subject, and that the posts that have received actions from such blogs are the ones that contain the subject. The proposed method starts with a small number of manually-selected seed posts containing the subject. Then, the method selects the blogs that have performed actions to the seed posts over some threshold and the posts that have received actions over some threshold. Repeating these two steps gradually expands the blog community. This paper presents various techniques to improve the accuracy of the proposed method. The experimental results show that the proposed method exhibits a higher level of accuracy than the methods proposed in prior research. This paper also discusses business applications of the extracted community, such as target marketing, market monitoring, improving search results, finding power bloggers, and revitalization of the blogosphere.     

Development of a new automatic fault diagnosis system for fine pattern transmission lines

International Journal of Control, Automation and Systems - This paper presents a new automatic fault diagnosis and detection system for fine pattern interconnects. It is verified by performance of...     

A Thermoelectric Generator Using Engine Coolant for Light-Duty Internal Combustion Engine-Powered Vehicles

We proposed and fabricated a thermoelectric generator (TEG) using the engine water coolant of passenger vehicles. The experimental results revealed that the maximum output power from the proposed thermoelectric generator was ~75 W, the calculated thermoelectric module efficiency of the TEG was ~2.1%, and the overall efficiency of electric power generation from the waste heat of the engine coolant was ~0.3% in the driving mode at 80 km/h. The conventional radiator can thus be replaced by the proposed TEG without additional devices or redesign of the engine water cooling system of the existing radiator.     

Design and manufacture of a toroidal-type SMES for combination with real-time digital simulator (RTDS)

The authors designed and manufactured a toroidal-type superconducting magnetic energy storage (SMES) system. The toroidal-type SMES was designed using a 3D CAD program. The toroidal-type magnet consists of 30 double pancake coils (DPCs). The single pancake coils (SPCs), which constitute the double pancake coils, are arranged at an angle of 6° from each other, based on the central axis of the toroidal-type magnet. The cooling method used for the toroidal-type SMES is the conduction cooling type. When the cooling method for the toroidal-type SMES was designed, the two-stage Gifford–McMahon (GM) refrigerator was considered. The Bi-2223 HTS wire, which was made by soldering brass on both sides of the superconductor, is used for the magnet winding. Finally, the authors connected the toroidal-type SMES to a real-time digital simulator (RSCAD/RTDS) to simulate voltage sag compensation in a power utility.     

Assembly of nanomaterials through highly ordered self-assembled monolayers and peptide-organic hybrid conjugates as templates

Synthesis and processing techniques have now been established for obtaining high quality monodisperse nanocrystals of various metallic and semiconducting materials, fullerenes of distinct properties, single- and multi-wall carbon nanotubes, polymeric dendrimers with tailored functionalities, as well as other nanophase constructs. The next key step towards novel applications of nanostructured materials concerns their positioning, arrangement, and connection into functional networks without mutual aggregation. In this review, we highlight the recent progress of using anthracene- and pyrene-based self-assembling molecules with tunable energetic (pi-pi interactions, hydrogen bonding, dipole-dipole interactions) and variable geometries to create stable, highly ordered, and rigid self-assembled monolayer (SAM) templates with adjustable superlattices on crystalline substrates. Based on aromatic SAM templates, stable and highly ordered self-assembled structures of optoelectronically active C60 have been obtained and shown to exhibit desirable electrical and optoelectronic properties, such as nonlinear transporting effect for molecular electronics and efficient photocurrent generation for mimicking photosynthesis in nature. By using genetically engineered polypeptides with surface recognition for specific inorganics, selective integration of nanoparticles onto aromatic SAM templates have also been realized. Through a combination of spatially confined surface chemical reaction and microcontact printing, sub-micron arrays of peptide-organic hybrid conjugates were successfully generated to serve as templates to achieve the patterned assembly of nanoparticles.     

Synthesis and lithographic characterization of poly[(dihydrocarveol)-co-(1,1-dimethylethyl bicyclo[2.2.1]hept-5-ene-2-carboxylate)-co-(maleic anhydride)]

A new ArF single-layer resist polymer, poly(dihydrocarveol-co-1,1-dimethylethyl bicyclo[2.2.1]hept-5-ene-2-carboxylate-co-maleic anhydride) has been synthesized by radical polymerization. The molar composition of synthesized resist polymer was confirmed by elemental analysis. The obtained molar composition was 0.25:0.35:0.40. This resist polymer was found to be stable up to 230 °C, but above 250 °C it underwent rapid thermal deprotection of the tert-butyl groups by releasing carbon dioxide and 2-methylpropene. The deprotection temperature was established by DSC and TGA. Using the resist, 0.14 µm L/S pattern was obtained at 26 mJ/cm⁻² doses, using an ArF stepper and the developer of 2.38 wt% tetramethyl ammonium hydroxide aqueous solution. © 1999 Society of Chemical Industry     

Experimental study on nanofludic heat pipe hot chuck plate in semiconductor wafer baking process

The temperature uniformity on a heat pipe hot chuck (HPHC) during semiconductor wafer processing has been an important factor to critical dimension (300 mm) uniformity as the feature size of semiconductors decreases and productivity density increases due to the new process of nano size special manufacturing technology. To design the present heat pipe hot chuck system, which has enhanced temperature uniformity for the wafer process, the heat distribution of the system was analyzed experimentally with various working fluids such as water, TiO₂, ATO, ITO, Al₂O₃, and Ag-nanofluids and 8 cell structures. Unlike the conventional solid state chuck, the present heat pipe hot chuck system consists of a heat pipe containing specially charged working fluid. Various working fluids have been tested to find best temperature uniformity feature on the top surface of hot chuck. TiO₂-nanofluid was used and tested as the working fluid of the heat pipe hot chuck system in this paper. The temperature uniformity of upper surface was sustained in the range of ±1°C. A nano-porous layer was observed on the surface with the good result of surface temperature uniformity compared with distilled water.     

Circulating flow reactor for recycling of carbon fiber from carbon fiber reinforced epoxy composite

For the purpose of development of a chemical recycling process for carbon fiber from carbon fiber reinforced epoxy composite, a new chemical recycling system using nitric acid aqueous solution has been proposed. The recycling system is composed of hexahedral circulating flow reactor made of quartz, Teflon supporter, acid resistance pump and auxiliaries. Epoxy matrix in the composite was effectively decomposed by nitric acid aqueous solution in the circulating flow reactor and carbon fiber could be recycled without any tangle or disturbance. Optimum conditions for the recycling process have been experimentally established. Tensile strength loss of recycled carbon fiber and composition of liquid phase decomposition products were analyzed.     

Synthesis of Allylester Resin Tethered to Layered Silicates by <Emphasis Type="Italic">in-situ</Emphasis> Polymerization and Its Nanocomposite

Summary Allylester resin tethered to layered silicate was synthesized by in-situ polymerization method and was cured by tert-butylperbenzoate (TBPB) directly. We ascertained the existing of carbonyl and benzyl groups which come from diallyl terephtalate in the gallery of layered silicates using the thermogravimetric analysis (TGA) and FT-IR. The residual weight and new IR peaks of the clay, which is treated by in-situ polymerization, imply that the hydroxy group of intercalant takes part in the polymerization of allylester resin. Also, its nanocomposite was characterized by means of X-ray diffraction (XRD) and transmission electron microscopy (TEM). The XRD patterns and TEM photographs indicate that the basal spacing (d ₀₀₁ ) of the nanocomposite made by in-situ polymerization is larger than those of the nanocomposite made by a simple mixing. Received: 3 October 2002/Revised version: 2 December 2002/Accepted: 3 December 2002 Correspondence to Seok-Ho Hwang