Decorating surface charge of graphite nanoplate using an electrostatic coupling agent for 3-dimensional polymer nanocomposite

Here, we report a facile approach to electrostatically couple the surface charges of graphite nanoplate (GNP) fillers and poly(methyl methacrylate) (PMMA) polymer particles using ethylene maleic anhydride (EMA) copolymer as an electrostatic coupling agent. Our strategy involved switching the intrinsic repulsive electrostatic interactions between the directly exfoliated GNPs fillers and the PMMA particles to attractive electrostatic surface interactions for preparing core(PMMA)-shell (GNP) precursor in order to optimizing 3-dimensionally dispersed polymer nanocomposite. As a result, the electrical conductivity of the composites dramatically increased by a factor of 16.7 in the EMA-coupled GNP/PMMA composites compared with that of the EMA-free GNP/PMMA composites. In addition, the percolation threshold was also notably reduced from 0.32 to 0.159 vol% after electrostatic coupling of the GNPs fillers and PMMA particles. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48390.     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry     

Study on the c-axis preferred orientation of ZnO film on various metal electrodes

ZnO thin film was deposited on various metal electrodes by reactive sputtering, and c-axis preferred orientation of the film has been studied. ZnO, which has high piezoelectricity, is promising for oscillators or filter devices such as surface acoustic wave (SAW) device, gas sensor, and film bulk acoustic resonator (FBAR). But, for the application of ZnO film for these devices, the film should be grown with c-axis normal to the electrode. In this study, Pt, Al, and Au were deposited on Si wafer, and the surface roughness and crystal structure of the ZnO film on the electrode were investigated using AFM, scanning electron microscopy (SEM), and X-ray diffraction (XRD). Columnar structures of ZnO films were grown with c-axis normal to all electrodes, and among them Pt electrode showed the highest preferred orientation of ZnO film.     

Lead differentially modifies cytokine production in vitro and in vivo

An imbalance between helper T cell type 1 (Th1) and helper T cell type 2 (Th2) activation can result in immunodysregulations leading to impaired cell-mediated immunity with an increased incidence of infectious disease or cancer and/or aberrant humoral immunity that may culminate with an autoimmune disease. Mercury, a heavy-metal toxicant, is known to induce renal autoimmunity characterized by a predominant Th2 response. Lead, another metal toxicant, causes enhanced B cell activities and impairs host resistance to several bacterial and viral infections. In addition, Pb was reported to enhance Th2 proliferation and inhibit Th1 proliferation. The differential effects of Pb on Th subset activation have been further investigated. In vitro IL-4 production by a Th2 clone was significantly increased by the addition of PbCl2, whereas IFN gamma production by a Th1 clone was decreased by the addition of PbCl2. When BALB/c mice were subcutaneously exposed to PbCl2, ex vivo Il-4 production by anti-CD3-stimulated splenic T cells was enhanced, but IFN gamma production was inhibited. Additionally, the plasma IL-4 and IgE levels of Pb-exposed mice were increased, and the plasma IFN gamma levels were significantly lowered in the absence of any additional exogenous antigen. In vitro, ex vivo, and in vivo treatment with HgCl2 produced similar findings. This study is the first report of the preferential activation of a Th2 response by Pb in vivo and suggests that PB, like Hg, may induce autoimmune responses by upsetting the balance between Th1- and Th2-like cells, which could enhance production of antibodies to self antigens.     

An enhanced zone 3 algorithm of a distance relay using transient components and state diagram

Zone 3 of a distance relay is used to provide the remote backup protection in case of the failure of the primary protection. However, the risk of maloperation under stressed conditions such as heavy loading, voltage, and transient instability is quite high. Zone 3 is used in combination with the derivatives of the voltage and current, etc. to prevent maloperation. At times, the impedance characteristics that restrict the tripping area of relay are used to avoid maloperation due to load encroachment. This work presents a novel zone 3 scheme based on combining the steady-state components (i.e., 60 Hz) and the transient components (TCs) using a state diagram that visualizes the sequence of studies that emanate from the sequence of events. The simulation results show that the novel zone 3 distance relay elements using the proposed method operate correctly for the various events.     

A finite element analysis of damage propagation during metal forming process

In this paper damage propagation during metal forming process is investigated with the concept of continuum damage mechanics. An isotropic damage model based on the theory of materials of type N is adopted to describe the damage process of a ductile material with large elasto-viscoplastic deformation. To solve the finite elasto-viscoplasticity problem, a reasonable kinematic strain measure for largely deformed solids is used and the damage constitutive equations based on thermodynamical framework are developed. The stiffness degradation of the loaded material is chosen as a damage measure. An extended interior penalty method is used to impose the contact condition on the boundary. The highly nonlinear equilibrium equations are reduced to the incremental weak form and approximated by the total Lagrangian finite element method. The displacement control method along with the modified Riks' continuation technique based on displacement parameter is used to solve the incremental iterative equations. As numerical examples, upsetting, backward extrusion and punch problems are simulated and the results of damage propagation and J₂ stress contours with and without damage are presented. For punch problems, spring back and residual stresses are also presented.     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

Double melting behavior of cyclic tris(ethylene terephthalate)

Summary Cyclic tris(ethylene terephthalate) (CTET) was separated from oligomeric extract of poly(ethylene terephthalate) by the conventional solvent separation method. The structure of CTET was characterized by differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy. It is shown that the double melting behavior of meltcrystallized CTET is attributed to the morphological change created by heat-treatment. The effect of the morphological change on the crystal structure of CTET was also examined.     

Effects of potential and heat treatment on phase transition of alumina dielectric layer

The characteristics and growth behaviors of alumina dielectric layer formed by anodic oxidation were investigated. The aluminum oxide layer anodized at 400 V was predominantly amorphous alumina, but at the applied potentials more than 500 V, amorphous and crystalline γ-alumina were existed in anodic oxide layer and the ratio of γ-alumina increased with the increasing applied potential. During the heat treatment at 600^°C or higher temperature, amorphous alumina layer was transformed into the crystalline γ-alumina. The phase transition of anodic amorphous alumina into crystalline depends on anodic applied potentials and heat-treatment temperatures.