Thermodynamic Regularities in Perovskite and K2NiF4 Compounds

It has been found that the enthalpy of formation of perovskite compounds, Δ_fH° (ABO₃, B = transition metais), from binary oxides can be well characterized in terms the tolerance factor, t≡(r_A+ r_o)√2 (r_B+ r_o), where r_A and r_B are the radii of A-site ions with 12-coordination and B-site ions with 6-coordination, respectively, and Δ_fH°=−168 + 270(1 − t) kJ·mol⁻¹ for A^IB^VO₃, Δ_fH°=−125 + 1000(1 − t) kJ·mol⁻¹ for A^IIB^IVO₃, and Δ_fH°=− 90 + 720(1 − t) kJ·mol⁻¹ for A^IIIB^IIIO₃. Although the thermodynamic data of K₂NiF₄ compounds are not extensive, a similar regularity can be found when use is made of the radii of A-site ions with 9-coordination for the K₂NiF₄ compounds. These correlations will be quite useful in predicting.     

Polymorphic behavior of gondoic acid and phase behavior of its binary mixtures with asclepic acid and oleic acid

Molecular properties of polymorphic forms of gondoic acid [cis-C_20:1Δ11ω9 (GOA)] have been studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC), optical microscopy, and Raman scattering, in comparison to those of six principal unsaturated fatty acids: oleic acid [cis-C_18:1Δ9ω9 (OA)], erucic acid [cis-C_22:1Δ13ω9 (ERA)], petroselinic acid [cis-C_18:1Δ6ω12 (PSA)], asclepic acid [cis-C_18:1Δ11ω7 (APA)], palmitoleic acid [cis-C_16:1Δ9ω7 (POA)], and elaidic acid [trans-C_18:1Δ9ω9 (ELA)]. In addition, phase behavior of binary mixtures of GOA and APA and OA was examined by XRD and DSC. The polymorphic structures of GOA are quite similar to those of APA, ERA, POA, and partly to OA. In particular, DSC and Raman scattering studies have shown that gondoic acid exhibits conformational disordering on heating at the ω-chain, a chain segment between the double bond and CH₃ group, as a transition from all-trans (γ form) to gauche-rich (α form) conformations. A miscible mixing phase was observed in the mixture of GOA and APA, yet eutectic phases were observed in the GOA and OA mixtures. This is a remarkable contrast because the binary mixture systems of varying combinations of cis-unsaturated fatty acids examined so far exhibited either eutectic nature or molecular compound formation. It is expected that specific molecular interactions between GOA and APA that originate from the equivalence of the length of the Δ-chain, the chain segment between the cis-double bond and COOH group, and also from the presence of the γ-α order-disorder transformation would be operating to form the miscible mixing phase.     

Changes in the Peeled Surfaces of Copper Thin Films Deposited on Polyimide Substrates After Heat Treatment

Peel strength between a copper (Cu) thin film and a polyimide (pyromellitic dianhydride-oxydianiline, or PMDA-ODA) substrate is reduced by heat treatment at 150°C in air. In this work, we investigated the peel strength, the morphology of the interface between Cu films and polyimide substrates using optical microscopy and electron microscopy, and chemical change of the interface using Auger electron spectroscopy (AES) and micro X-ray photoelectron spectroscopy (XPS). The analysis showed that CuO “lumps” were present on the peeled surface of PMDA-ODA after heat treatment at 150°C in air. The peeled surfaces of other polyimide substrates were also analyzed: biphenyl dianhydride-para phenylene diamine (BPDA-PDA) and biphenyl dianhydride-oxydianiline (BPDA-ODA). CuO lumps were present on the peeled surface of BPDA-ODA after the heat treatment, but not that of BPDA-PDA. Compared with the adhesion strength for the Cu thin film, the adhesion strength was high for the Cu/PMDA-ODA and Cu/BPDA-ODA laminates, but the adhesion strength was very low for the Cu/BPDA-PDA laminate. This low strength is the reason that CuO lumps were not detected on the peeled surface of the BPDA-PDA substrate. These CuO lumps were related to the adhesion degradation of the Cu/polyimide laminates after the heat treatment.     

Factors associated with serum magnesium and vascular stiffness in maintenance hemodialysis patients

Introduction : We evaluated the associated factors of serum magnesium in patients on maintenance hemodialysis (MHD). Furthermore, we evaluated the relationship between low serum magnesium and arteriosclerosis in these patients. Methods : In 129 patients on MHD, we evaluated the blood levels of magnesium, brachial‐ankle pulse wave velocity (ba‐PWV), ankle‐brachial index (ABI), and intima‐media thickness of the common carotid artery (IMT). Findings : In MHD patients, the serum level of magnesium was significantly correlated with age, calcium, TNF‐α, albumin, and ba‐PWV but not with ABI or IMT. In the multiple regression analysis, albumin (P = 0.0001, β = 0.31) and calcium (P = 0.029, β = 0.18) were selected as significant predictors of the magnesium level in MHD patients. Furthermore, the serum level of magnesium, as well as systolic blood pressure (P = 0.0001, β = 0.32) and age (P = 0.005, β = 0.25), were selected as significant (P = 0.012, β = ?0.22) predictors of ba‐PWV in MHD patients. Discussion : In MHD patients, the serum magnesium level was associated with the serum levels of calcium and albumin. Furthermore, a low serum magnesium level in MHD patients was associated with the index of vascular stiffness.     

High Temperature Schottky Barrier on n-Type SrTiO3 and Its Sensitivity to Ambient Gases

Metal or oxide electrodes (Pt, Au, Ag, (La, Sr)CoO₃) were deposited on single crystals of 0.02 mol% Nb doped SrTiO₃ by pulsed laser deposition. Current-voltage and capacitance-voltage responses were measured using three-terminal electrode configuration. Under high oxygen partial pressures, clear rectification behaviors were observed. Diffusion model well explained the current vs. voltage relationship with ideality factors close to unity. The barrier height varied reversibly with oxygen partial pressure, and was almost independent of the electrode materials, which suggested that the Fermi level at the interface was pinned by the surface states. The origin of the surface states was discussed in terms of oxygen adsorption or oxidative formation of metal vacancies around the surface. Chemical interaction between the surface and oxygen and resulting cation rearrangement was concluded to play an important role from the long stabilization time on oxygen partial pressure change. The water vapor pressure dependence of the barrier height was also explained by competitive adsorption of oxygen and water.     

Cloning and sequence analysis of a gene (aly PG) encoding poly(alpha-L-guluronate)lyase from Corynebacterium sp. strain ALY-1

The aly PG gene, coding for a poly alpha-l-guluronate lyase (PG lyase) of Corynebacterium strain ALY-1, was cloned and sequenced. The gene consists of 768 bp encoding a signal peptide of 32 amino acids and a mature protein of 224 amino acids. Two disulfide bond cross-linkages were found to be formed between Cys-4 and Cys-51 and between Cys-200 and Cys-206 in the native PG lyase molecule. The deduced amino acid sequence of the Corynebacterium sp. aly PG gene exhibited 29% homology toward that of the Klebsiella pneumoniae, subsp. aerogenes aly A gene, with two conserved regions (the amino acid sequences from Y-102 to M-110 and from Y-221 to Q-229).     

Lifetime prediction of woven GFRP laminates under constant tensile loading in hydrothermal environment

This study aims to investigate the effects of a hydrothermal environment on the creep behavior of woven glass fiber reinforced plastics (GFRPs) and to propose a method for predicting their lifetime. Toward this end, experiments were carried out in air and deionized water at 40, 60, 80 and 95 ^°C. Static tensile tests of woven GFRP were conducted in air and in deionized water to evaluate its mechanical properties and to determine suitable experimental conditions for subsequent constant tensile load tests. The mechanical properties of the woven GFRP decreased with an increase in temperature and with water immersion. Constant tensile load tests were also conducted in air and in deionized water to investigate the creep behavior and fracture time. The fracture time decreased with an increase in stress and water temperature and demonstrated the possibility of a threshold stress for fracturing. In addition, the fracture time during each constant tensile load test was predicted using a modified Reiner–Weissenberg (R-W) criterion, which is a failure criterion for linear viscoelastic materials based on the accumulation of dissolved energy within the GFRP. In this study, the R-W criterion was modified to consider the effects of degradation and its acceleration, which are due to the applied stress and immersion in a solution. The predicted results were in good agreement with the experimental data when considering the effects of hydrothermal aging.     

Biosynthesis of novel thermoplastic polythioesters by engineered Escherichia coli

The development of non-petrochemical sources for the plastics industry continues to progress as large multinationals focus on renewable resources to replace fossil carbon. Many bacteria are known to accumulate polyoxoesters as water-insoluble granules in the cytoplasm. The thermoplastic and/or elastomeric behaviour of these biodegradable polymers holds promise for the development of various technological applications. Here, we report the synthesis and characterization of microbial polythioesters (PTEs), a novel class of biopolymers of general technological relevance. Biosynthesis of PTE homopolymers was achieved using a recombinant strain of Escherichia coli that expressed a non-natural pathway consisting of a butyrate kinase, a phosphotransbutyrylase, and a PHA synthase. Different homopolymers were produced, consisting of either 3-mercaptopropionate, 3-mercaptobutyrate, or 3-mercaptovalerate repeating units, if the respective mercaptoalkanoic acids were provided as precursor substrates to the fermentative process. The PTEs contributed up to 30% (w/w) of the cellular dry weight and were identified as hydrophobic inclusions in the cytoplasm. The chemical and stereochemical homogeneity of the purified PTEs were identified by different methods, and the estimated physical properties were compared to the oxypolyester equivalents, revealing low crystalline order and, for the poly(3-mercaptopropionate) improved thermal stability. The ability to produce PTEs through a biosynthetic route opens up new avenues in the field of biomaterials.