基于RD算法的星载SAR斜视成像

本文研究了用距离一多普勒（ＲＤ）算法来实现星载 ＳＡＲ的斜视成像处理。给出了星载 ＳＡＲ斜视时的空间几何模型和回波信号模型，详细分析了地球自转和斜视产生的多普勒质心所引起的距离走动差异，及时域和频域校正对成像的影响，并研究了一种改进的ＲＤ算法进行距离走动的校正，此算法能适应大的斜视距离走动和地球自转距离走动。针对不同的距离走动校正进行了计算机仿真，理论分析和仿真结果表明：这种改进的ＲＤ算法是有效的。     

一种PN码自适应捕获门限的改进算法

文献[1]提出了一种用于直扩系统的PN码自适应门限算法。但该文献也指出,此算法对门限总数十分敏感。当门限总数设置不当时,系统的平均捕获时间将显著增加。这限制了该算法在实际中的应用。本文就此提出了改进,给出了算法及电路框图。仿真结果表明,与原方案相比,改进算法改善了对门限总数的敏感性,降低了PN码平均捕获时间。     

A dynamic-programming-based exact algorithm for general single-machine scheduling with machine idle time

This paper proposes an efficient exact algorithm for the general single-machine scheduling problem where machine idle time is permitted. The algorithm is an extension of the authors’ previous algorithm for the problem without machine idle time, which is based on the SSDP (Successive Sublimation Dynamic Programming) method. We first extend our previous algorithm to the problem with machine idle time and next propose several improvements. Then, the proposed algorithm is applied to four types of single-machine scheduling problems: the total weighted earliness-tardiness problem with equal (zero) release dates, that with distinct release dates, the total weighted completion time problem with distinct release dates, and the total weighted tardiness problem with distinct release dates. Computational experiments demonstrate that our algorithm outperforms existing exact algorithms and can solve instances of the first three problems with up to 200 jobs and those of the last problem with up to 80 jobs.     

Thermal and dielectric properties of zirconyl phosphate compact

Experimental results are presented on the measurements of thermal expansion (up to 1500°C), thermal conductivity (up to 1000°C), dielectric constant (up to 450 °C) and tan (up to 800 °C) of zirconyl phosphate compacts obtained by sintering at 1600°C. The thermal expansion coefficient of the samples at the temperature below 1100°C was less than 1.7 × 10^–6°C^–1. The samples showed a definite shrinkage at temperatures of 1110 and 1470°C due to the phase transformations. The expansion at 1500°C was less than that at 1100°C probably because of the phase transformation. The thermal conductivity at room temperature was a very small value (0.0046 to 0.0065 cal s^–1 cm°C^–1 cm^–2). The dielectric constant was close to 9. The value of tan° (–0.0001) measured is one of the lowest values for ceramic materials.     

Strain-induced ordering of microdomain structures in polystyrene-block-polybutadiene-block-polystyrene triblock copolymers cross-linked in the disordered state

Strain-induced ordering of microdomain structures in cross-linked polystyrene-block-polybutadiene-block-polystyrene (SBS) triblock copolymers was examined by the small-angle X-ray scattering technique. To stretch the SBS samples at elevated temperature above the glass transition temperature of polystyrene, polybutadiene blocks were chemically cross-linked in the disordered state. The initial morphology was disorder-like or bicontinuous due to incompletion of microphase separation in the presence of the chemical cross-links. When the cross-linked SBS samples were mechanically stretched at 130 °C and were further annealed for 24 h under a stretched state, the random domain structures ordered gradually and lamellar-like regularity was finally attained. It was found that the ordering proceeded more for the case of the higher strain.     

High-Resolution Electron Microscopy Observations of Stacking Faults in β-SiC

Structural images of the stacking faults in β-SiC were obtained with a high-resolution electron microscope. Stacking faults initially present in β-SiC powder particles were eliminated as grain growth proceeded at elevated temperatures.     

Development of high performance,waterborne coatings. Part II: Factors affecting adhesion performance

A new manufacturing process for high performance, waterborne coatings for can coating application was developed, which includes emulsification of an epoxy resin with or without a hardener by incorporation of an acrylic resin. It is possible by this new process to emulsify a variety of resins with minimum effects of the surfactant. (acrylic resin). The effects of surfactant and neutralizer on adhesion performance were studied. It was found that the effects of the acrylic resin amount were relatively small, and that the effects of the neutralizer were significant. It was confirmed that the usage of ammonia or amines with a branched alkyl group is required to achieve balanced dry and wet adhesion.     

A pre-heating vaporization technology of coal-water-slurry for the gasification process

A pre-heating vaporization technology of coal water slurry, CWS, was developed to increase the efficiency of coal gasification with the reduction of oxygen consumption. A CWS pre-heating experimental unit having a capacity of 2.0 tons-coal/day was manufactured. After the CWS was heated to 573 K at about 10 MPa, water in CWS was continuously vaporized in a tube of which the diameter increased gradually (2–10 mm I.D.), and dry coal particles with steam were atomized and fed to a vessel. No aggregation of coal particles was observed in the atomized samples. The temperature and the pressure distributions of the fluid were calculated with empirical heat transfer and pressure drop correlations. The calculated results well corresponded to the experimental data measured in some test points. Using the calculation model, a large scale apparatus of 100 tons-coal/day was designed using KNO₃ + NaNO₂ + NaNO₃ molten salt as a heating medium.     

浅谈省级法人单位基础信息库建设模式

在信息化建设中,信息资源的开发和利用是信息化建设的核心内容。建设法人单位基础信息库（下简称法人库）,其目的就是整合、共享作为社会活动两大主体之一的法人单位的基础信息。而建设法人库既涉及技术标准,又涉及管理体制问题。为提高法人库建设的实际效果,选定切合实际的建设模式尤其重要。本文重点介绍“集中式”和“分布式”两种法人库建设模式的各自特点和适用环境。     

含高渗透率分布式光伏配电网的网络分区与电压协调控制

为了解决大规模分布式光伏并网导致的电压越限问题,提出一种含高渗透率分布式光伏配电网的网络分区与电压协调控制方法。首先根据改进的模块度函数分区算法将配电网划分为若干分区。再以光伏有功削减量、节点电压偏差和网损之和最小为目标构建各分区子优化控制模型。然后,根据区内信息采集和区间信息交互,采用同步交替方向乘子法协调求解各分区的子模型,经过多次迭代后将最优解输出,实现各分区并行控制。最后,将分区方法和电压控制策略应用于贵州省某地实际馈线系统,得到了良好的效果,在保证配电网经济运行的同时提高电压质量,减少功率倒送。