Effect of process parameters on impact strength of Al-7% Si alloy castings produced by VAEPC process

The castings produced by the evaporative pattern casting (EPC) process have blow holes. The blow holes in EPC castings are because of the non-escape of the gas produced as a result of burning of polystyrene pattern in the sand mold. To overcome the problem of blow holes, the EPC process is combined with the vacuum (V)- process. The vacuum applied to EPC mold draws the decomposed gases and improves the casting quality produced by the EPC process. The developed hybrid process has been termed as the vacuum assisted evaporative pattern casting (VAEPC) process. The objective of this paper to investigates the effect of process parameters, i.e, degree of vacuum, pouring temperature, grainfineness number, amplitude of vibration and time of vibration on the impact strength of Al-7% Si alloy castings in VAEPC process. In order to evaluate the effect of selected process parameters, the response surface methodology (RSM) is used to formulate a mathematical model which correlates the independent process parameters with the desired impact strength. The central composite rotatable design has been used to conduct the experiments. The results indicate that the impact strength decreases with increases in the grainfineness number and pouring temperature. Whereas, it has an inverse relationship with amplitude of vibration, time of vibration and degree of vacuum. The best value of impact strength (2.34 N/mm²) has been obtained at 400 mm Hg degree of vacuum imposed, 650°C as pouring temperature, 60 as sand grainfineness number, 460 μm as amplitude of vibration, and 70 s as time of vibration.     

In Situ Performance Testing of Deteriorating Water Tanks for Durability Assessment

Reports of failure of existing concrete structures due to a lack of durability, rather than a deficiency in structural strength, has made concrete technologists, engineers, and researchers focus research on the parameters influencing durability performance with respect to time. Systematic performance monitoring, with respect to chosen durability parameters of existing concrete structures, will decide the direction of future research in this area. Inferences based on laboratory simulations and testing need to be confirmed by in situ field measurements and studies. In situ condition rating and performance monitoring surveys have been conducted by many researchers, scientists, and professional associations, and reported in literature. Inferences of few such studies are summarized and discussed. Deterioration of concrete structures constructed in recent times is observed at relatively faster rates, and has been mainly attributed to cracking. Cracking is associated with the use of faster-hydrating portland cements with increased fineness and the tricalcium silicate (C3S) content to support the high speed of modern construction. In the present research, a case study of deteriorated water tank structures situated in the semitropical region of India is presented. Some selected parameters—such as concrete cover, carbonation depth, chloride concentration, compressive strength, etc. which influence long term durability of structures—have been measured.     

The Content Driven Mobile Internet

The development of future mobile networks will be driven, in large part, by content and web based services. In this paper, we examine several performance, scalability and architectural challenges faced by future mobile web applications and how advanced mobile content delivery techniques can address these challenges. We review existing content delivery using a taxonomy that consists of three categories: network scaling, end system acceleration, and content and protocol optimization. While wireline content delivery focuses on network and server scalability, mobile content delivery will likely benefit most from optimizing radio link usage. We also present our ongoing work in this area, which extends the functionality of edge caching to the terminal, uses user interest correlation information to maintain low terminal power consumption and adds a new dimension to radio resource management. This revised version was published online in August 2006 with corrections to the Cover Date.     

Dynamic bandwidth allocation for quality-of-service over Ethernet PONs

Ethernet-based passive optical network (EPON) technology is being considered as a promising solution for next-generation broadband access networks due to the convergence of low-cost Ethernet equipment and low-cost fiber infrastructures. A major feature for this new architecture is the use of a shared transmission media between all users; hence, medium access control arbitration mechanisms are essential for the successful implementation of EPON: i.e., to ensure a contention-free transmission and provide end users with equal access to the shared media. We propose to use the multipoint control protocol defined by the IEEE 802.3ah task force to arbitrate the transmission of different users, and we present different dynamic bandwidth allocation (DBA) algorithms to allocate bandwidths effectively and fairly between end users. These DBA algorithms are also augmented to support differentiated services, a crucial requirement for a converged broadband access network with heterogeneous traffic. We show that queueing delays under strict bandwidth allocation algorithms result in an unexpected behavior for certain traffic classes, and we suggest the use of DBA with appropriate local queue management to alleviate this inappropriate behavior. We conduct detailed simulation experiments to study the performance and validate the effectiveness of the proposed protocols.     

Thin conducting polypyrrole film on insulating surface and its applications

An electrically conductive plastic material was obtained by the polymerization of pyrrole on insulating polymeric materials and nylon cloth impregnated with the oxidant by vapour phase technique, resulting in a uniform, smooth and adherent coating of conducting polymer having a surface resistance ranging from 200 Ω/□ to 20 kΩ/□, which makes it suitable for applications as an antistatic material.     

Ceric-induced grafting of ethyl-acrylate onto sodium alginate

Sodium alginate was graft-copolymerized with ethyl acrylate using ceric ammonium nitrate as an initiator. In order to optimize the conditions for grafting, the concentrations of nitric acid, initiator and monomer together with temperature, time and amount of substrate were varied. The kinetic scheme of free radical graft copolymerization has been proposed and the equations relating the values of rate of polymerization, rate of graft copolymerization and rate of homopolymerization are also suggested. The experimental results agree very well with the proposed kinetic scheme.     

Mutual information based registration of multimodal stereo videos for person tracking

Research presented in this paper deals with the systematic examination, development, and evaluation of a novel multimodal registration approach that can perform accurately and robustly for relatively close range surveillance applications. An analysis of multimodal image registration gives insight into the limitations of assumptions made in current approaches and motivates the methodology of the developed algorithm. Using calibrated stereo imagery, we employ maximization of mutual information in sliding correspondence windows that inform a disparity voting algorithm to demonstrate successful registration of objects in color and thermal imagery. Extensive evaluation of scenes with multiple objects at different depths and levels of occlusion shows high rates of successful registration. Ground truth experiments demonstrate the utility of the disparity voting techniques for multimodal registration by yielding qualitative and quantitative results that outperform approaches that do not consider occlusions. A basic framework for multimodal stereo tracking is investigated and promising experimental studies show the viability of using registration disparity estimates as a tracking feature.     

Superfluid-insulator transition in disordered boson systems

We review the localization problem in two dimensions for interacting bosons in a random potential. This problem is intimately related to the study of ⁴ He adsorbed in porous media, Josephson junction arrays, disordered superconducting films and vortex glasses. Using path integral Monte Carlo techniques, we find a superfluid, a localized or Bose glass insulator with gapless excitations, and (at commensurate densities) a Mott insulator with a finite gap to excitations.     

Active learning for on-road vehicle detection: a comparative study

In recent years, active learning has emerged as a powerful tool in building robust systems for object detection using computer vision. Indeed, active learning approaches to on-road vehicle detection have achieved impressive results. While active learning approaches for object detection have been explored and presented in the literature, few studies have been performed to comparatively assess costs and merits. In this study, we provide a cost-sensitive analysis of three popular active learning methods for on-road vehicle detection. The generality of active learning findings is demonstrated via learning experiments performed with detectors based on histogram of oriented gradient features and SVM classification (HOG–SVM), and Haar-like features and Adaboost classification (Haar–Adaboost). Experimental evaluation has been performed on static images and real-world on-road vehicle datasets. Learning approaches are assessed in terms of the time spent annotating, data required, recall, and precision.