Surface treatment of titanium dioxide nanopowder using rotary electrode dielectric barrier discharge reactor

Titanium dioxide (TiO2) nanopowder (P-25;Degussa AG) was treated using dielectric barrier discharge (DBD) in a rotary electrode DBD (RE-DBD) reactor.Its electrical and optical characteristics were investigated during RE-DBD generation.The treated TiO2 nanopowder properties and structures were analyzed using x-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR).After RE-DBD treatment,XRD measurements indicated that the anatase peak theta positions shifted from 25.3° to 25.1°,which can be attributed to the substitution of new functional groups in the TiO2 lattice.The FTIR results show that hydroxyl groups (OH) at 3400 cm-1 increased considerably.The mechanism used to modify the TiO2 nanopowder surface by air DBD treatment was confirmed from optical emission spectrum measurements.Reactive species,such as OH radical,ozone and atomic oxygen can play key roles in hydroxyl formation on the TiO2 nanopowder surface.     

Microbial Sensors for the Detection of Fish Freshness

A microbial sensor system consisting of immobilized living spoilage-causing bacterium, Alteromonas putrefaciens, and an oxygen electrode was prepared and applied to the continuous determination of fish freshness. Fish freshness was expressed as a ratio of A/B, where A is the current decrease of the microbial sensor obtained by the application of l0–50 μL fish extract and B is the current decrease by the equivalent volume of culture medium. Freshness of bluefin tuna and yellowtail meats stored in ice for up to 2 weeks was determined by both the proposed and the conventional K value enzyme sensor method. Good comparative results were obtained. One assay could be completed within 13 min.     

二垩英与资源回收-Ⅰ考虑到二垩英生成的资源与能量回收基础研究

目前在日本,存在大量工业垃圾,包括各种塑料制品,ASR(汽车破碎垃圾),含有毒PCB(多氯联苯)的110变压器和PVC(聚氯乙稀)制品等.而来自城市垃圾焚烧炉的废气含有大量能量.因此,在充分考虑环境、避免二垩英生成的同时,安全回收来自工业垃圾、城市和/或工业垃圾焚烧炉的资源和能量是个非常重要的课题,这也将对抑制CO2排放作出贡献.正确地阐明焚烧过程中二垩英的生成机理及详细研究含少量二垩英的焚烧废气在冷却过程中大量形成二垩英的临界温度是项很重要的工作.解决这个问题可有效实现资源和能量的回收.本报告介绍日本在二垩英排放方面目前采取的对策和存在的问题以及大阪大学为阻止二垩英生成所做的基础研究工作.     

Development of magnesium composite alloy by a new method combining B2O3 addition and melt stirring

For developing high performance magnesium alloys, a new method in combination of B2O3 addition and melt stirring was applied. When 0.3%, 6% and 12%（ mass fraction） B2O3 was added into pure Mg, many twins were produced in each alloy. The average grain size of Mg was about 200 μm. In Mg-6Al alloy, the grain size is decreased from 50 to 35 μm by B2O3 addition. In Mg-6RE （rare earth） alloys, the grain size is decreased from 35 to 15 μm. The grain size of Mg-9Al- 6Ti-3B2O3 alloy is about 5 μm. The hardness of pure Mg does not change by B2O3 addition. In Mg-6Al alloy, the hardness is increased by addition of 3% B2O3, however, the hardness of Mg-6RE alloy is decreased by B2O3 addition. Addition of B2O3 into Mg-Al, Mg-RE and Mg-Al-Ti alloys makes the fine grain structures, the hardness of Mg-RE alloy is decreased. This strange behavior may be interpreted with existence of many fine pores in the alloy. The mechanical properties of composite Mg-9Al-6Ti with 3?O3 are higher than those of AZ91C. The present results demonstrate the potential of this new method for developing high performance magnesium alloys.     

Fe-Ni-Si基奥氏体时效合金的马氏体相变和形状记忆效应

It is well known that the morphologies of the α martensite formed from the γ phase in ferrous alloys are classified into five types of lath, butterfly, (225)A type plate,lenticular and thin-plate. Among those α martensites, onlythe thinplate martensite, which is characterized by containing a high density of transformation twins, has a potential of exhibiting a perfect shape memory (SM) effect.Recently the present authors found in Fe-Ni-Si alloys that the thin-plate martensite is formed by the introduction of fine and coherent γ-(Ni,Fe)3Si particles with a L12 ordered structure in the austenite matrix due to ausaging. In the present study, the SM properties of the ausaged Fe-Ni-Si alloys with the thin-plate martensite are investigated by a conventional bending-test. The effects of the addition of Co to the Fe-Ni-Si alloys on the martensitic transformation and the SM properties are also investigated. It is shown that while the ausaged Fe-Ni-Si ternary alloys exhibit an imperfect SM effect due to reverse transformation from stress-induced thin-plate martensite to austenite, the SM properties are improved by the addition of Co. An almost perfect SM effect is confirmed in the Fe-Ni-Si-Co alloys by heating to 1 100 ℃ after deformation at -196 ℃.     

Comment on the equivalence condition of optimal control problems

Given a general non-linear plant, a method is presented for designing model reference feedback controllers for the plant. It is shown that the feedback controllers produced will guarantee prespecified closed-loop properties if the error between the plant and model lies within computable bounds. In particular, an upper bound on the tracking error is established and conditions are given that ensure closed-loop stability.     

Plasma Behavior in a High‐Temperature Noble Gas Plasma Disk‐Shaped MHD Power Generator

R‐θ two‐dimensional numerical simulations have been carried out to clarify the plasma behavior in a high‐temperature noble gas plasma disk‐shaped magnetohydrodynamic (MHD) generator. At low inlet total temperature and high load resistance, the plasma has spiral structure which is similar to the nonuniform structure under the weak noble gas ionization condition in a seed‐plasma MHD generator. As seen in a linear‐shaped Faraday‐type MHD generator, the plasma becomes stable with increase in the inlet total temperature because the coulomb collision of electrons becomes dominant. Even at low inlet total temperature, the ionization instability can be suppressed for low load resistance, because the relatively low electron temperature due to less Joule heating makes the ionization relaxation time longer than plasma residential time.     

MQL深孔钻削中关键因素的最适化研究

采用了微量润滑技术的钻削在长距或小孔径的条件下有必要对所供给的油雾和压缩空气进行最佳化分析.本文首先对切削变形与切削热分布的总能量进行了分析,并在把普通钻削过程中油雾假设为稳态可压缩绝热紊流状态的假设条件下,通过分析得到油膜厚度、气流速度、压缩空气温度和刀具平均温度等重要影响参数的相互关系.最后,给出微量润滑钻削条件下,切削过程中所需的油膜和压缩空气的最佳容量.     

等温淬火温度对奥贝球铁水脆化行为的影响

研究了等温淬火温度对奥贝球铁(ADI)水脆化行为的影响，水附着条件下不同等温淬火温度处理的ADI均发生水脆化行为，抗拉强度和伸长率显著降低；但随着等温淬火温度升高，ADI的水脆化程度降低。高强度的ADI、淬火回火球铁和珠光体球铁均发生水脆化行为，而铁素体含量高的铸态球铁和铁素体球铁无明显的水脆化行为。