Analysis of Temperature Effect in Quadruple Gate Nano-scale FinFET

Silicon - Quadruple gate FinFET is a promising candidate among other multi-gate MOS devices due to it’s better scalability and higher short channel effect suppression capability in advanced...     

Choline Acetyltransferase Induces the Functional Regeneration of the Salivary Gland in Aging SAMP1/Kl -/- Mice

Salivary gland dysfunction induces salivary flow reduction and a dry mouth, and commonly involves oral dysfunction, tooth structure deterioration, and infection through reduced salivation. This study aimed to investigate the impact of aging on the salivary gland by a metabolomics approach in an extensive aging mouse model, SAMP1/Klotho -/- mice. We found that the salivary secretion of SAMP1/Klotho -/- mice was dramatically decreased compared with that of SAMP1/Klotho WT (+/+) mice. Metabolomics profiling analysis showed that the level of acetylcholine was significantly decreased in SAMP1/Klotho -/- mice, although the corresponding levels of acetylcholine precursors, acetyl-CoA and choline, increased. Interestingly, the mRNA and protein expression of choline acetyltransferase (ChAT), which is responsible for catalyzing acetylcholine synthesis, was significantly decreased in SAMP1/Klotho -/- mice. The overexpression of ChAT induced the expression of salivary gland functional markers (α–amylase, ZO-1, and Aqua5) in primary cultured salivary gland cells from SAMP1/Klotho +/+ and -/- mice. In an in vivo study, adeno-associated virus (AAV)-ChAT transduction significantly increased saliva secretion compared with the control in SAMP1/Klotho -/- mice. These results suggest that the dysfunction in acetylcholine biosynthesis induced by ChAT reduction may cause impaired salivary gland function     

Micro cam system driven by electrostatic comb-drive actuators based on SOI-MEMS technology

Microsystem Technologies - This paper reports a design and fabrication process of a micro cam system (MCS) with a flat-faced translating follower. The cam rim with cover diameter of 2.4 mm...     

Efficient topography optimization of a washing machine cabinet to reduce radiated noise during the dehydration process

Journal of Mechanical Science and Technology - In modern society, the use of washing machines has increased owing to increased interest in personal hygiene. Over the years, the performance of...     

Solving distribution problems in content-based recommendation system with gaussian mixture model

Applied Intelligence - Recommendation systems play an important role in boosting purchasing consumption for many manufacturers by helping consumers find the most appropriate items. Furthermore,...     

Polyacrylonitrile‐carbon Nanotube‐polyacrylonitrile: A Versatile Robust Platform for Flexible Multifunctional Electronic Devices in Medical Applications

Flexible multifunctional electronic devices are of high interest for a wide range of applications including thermal therapy and respiratory devices in medical treatment, safety equipment, and structural health monitoring systems. This paper reports a scalable and efficient strategy of manufacturing a polyacrylonitrile‐carbon nanotube‐polyacrylonitrile (PAN‐CNT‐PAN) robust flexible platform for multifunctional electronic devices including flexible heaters, temperature sensors, and flexible thermal flow sensors. The key advantages of this platform include low cost, porosity, mechanical robustness, and electrical stability under mechanical bending, enabling the development of fast‐response flexible heaters with a response time of ≈1.5 s and relaxation time of ≈1.7 s. The temperature‐sensing functionality is also investigated with a range of temperature coefficient of resistances from ?650 to ?900 ppm K^?1. A flexible hot‐film sensing concept is successfully demonstrated using PAN‐CNT‐PAN with a high sensitivity of 340 mV (m s^?1)^?1. The sensitivity enhancement of 50% W^?1 is also observed with increasing supply power. The low cost, porosity, versatile, and robust properties of the proposed platform will enable the development of multifunctional electronic devices for numerous applications such as flexible thermal management, temperature stabilization in industrial processing, temperature sensing, and flexible/wearable devices for human healthcare applications.     

Relating forest biomass to SAR data

The authors present the results of an experiment defined to demonstrate the use of radar to retrieve forest biomass. The SAR data were acquired by the NASA/JPL SAR over the Landes pine forest during the 1989 MAESTRO-1 campaign. The SAR data, after calibration, were analyzed together with ground data collected on forest stands from a young stage (eight years) to a mature stage (46 years). The dynamic range of the radar backscatter intensity from forest was found to be greatest at P-band and decreased with increasing frequencies. Cross-polarized backscatter intensity yielded the best sensitivities to variations of forest biomass. L-band data confirmed past results on good correlation with forest parameters. The most striking observation was the strong correlation of P-band backscatter intensity to forest biomass     

Thermal aging of a blend of high‐performance fibers

The focus of this work is the study of the thermal aging of high‐performance fibers used in the making of fire protective garments. Accelerated thermal aging tests were carried out on fabric samples made up of a blend of Kevlar® (poly p‐phenylene terephthalamide) and PBI (poly benzimidazole) staple fibers, as well as on yarns pulled from this fabric, by means of exposure to elevated temperatures, comprised between 190°C and 320°C. All samples underwent loss of breaking force retention. The material thermal life, defined as the time required for the fibers to attain a 50% reduction of the original breaking force, ranged between a dozen of days at the lowest exposure temperature, to less than an hour at the highest. Breaking force data were fitted using the Arrhenius model following two different approaches, namely the extrapolated thermal life value and the shift factors yielded by the time‐temperature superposition (TTS). The Arrhenius model seemed to describe appropriately the overall aging process, as inferred from the excellent fit obtained when using both approaches, although activation energies provided from both approaches are different. To follow the chemical evolution of the material with thermal aging, Fourier‐transform infrared (FTIR) analyses were conducted. The qualitative analysis of the FTIR spectra showed little evidence of chemical changes between the aged and the nonaged samples, indicating either that the aging process carries on without significant modification of the chemical structure of the fibers, or that FTIR is not an appropriate method to spot such a modification. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010