A 300-MHz 25-/spl mu/A/Mb-leakage on-chip SRAM module featuring process-variation immunity and low-leakage-active mode for mobile-phone application processor

An on-chip 1-Mb SRAM suitable for embedding in the application processor used in mobile cellular phones was developed. This SRAM supports three operating modes - high-speed active mode, low-leakage low-speed active mode, and standby mode - and uses a subdivisional power-line control (SPC) scheme. The combination of three operating modes and the SPC scheme realizes low-power operation under actual usage conditions. It operates at 300 MHz, with leakage of 25 /spl mu/A/Mb in standby mode, and 50 /spl mu/A/Mb at the low-leakage active mode. This SRAM also uses a self-bias write scheme that decreases of minimum operating voltage by about 100 mV.     

Cooperative behavior of various agents in dynamic environment

The multi-agent model is a model in which agents with limited ability cooperate each other to accomplish a goal. In this paper, we introduce a multi-agent model in which agents are created to imitate real ants. There are two different type of agents, each type of which has a particular task. We designed agents to communicate each other by using pheromone considering noise. On this model, we observed cooperative behavior of agents and evaluated conditions to make an order of behavior in the model.     

High Mechanical Strength Double‐Network Hydrogel with Bacterial Cellulose

Double‐network (DN) hydrogels with high mechanical strength have been synthesized using the natural polymers bacterial cellulose (BC) and gelatin. As‐prepared BC contains 90 % water that can easily be squeezed out, with no more recovery in its swelling property. Gelatin gel is brittle and is easily broken into fragments under a modest compression. In contrast, the fracture strength and elastic modulus of a BC–gelatin DN gel under compressive stress are on the order of megapascals, which are several orders of magnitude higher than those of gelatin gel, and almost equivalent to those of articular cartilage. A similar enhancement in the mechanical strength was also observed for the combination of BC with polysaccharides, such as sodium alginate, gellan gum, and ι‐carrageenan.     

Analysis of Humanoid Appearances in Human–Robot Interaction

Identifying the extent to which the appearance of a humanoid robot affects human behavior toward it is important. We compared participant impressions of and behaviors toward two real humanoid robots in simple human-robot interactions. These two robots, which have different appearances but are controlled to perform the same recorded utterances and motions, are adjusted by a motion-capturing system. We conducted an experiment with 48 human participants who individually interacted with the two robots and also with a human for reference. The results revealed that different appearances did not affect participant verbal behaviors, but they did affect such nonverbal behaviors as distance and delay of response. These differences are explained by two factors: impressions and attributions.     

An application of the 2-nitrobenzenesulfenyl method to proteomic profiling of human colorectal carcinoma: A novel approach for biomarker discovery

In the development of novel biomarkers, the proteomic approach is advantageous because using it the cancer-associated proteins can be directly identified. We previously developed a 2-nitrobenzenesulfenyl (NBS) method to improve quantitative proteome analysis. Here, we applied this method to proteomic profiling of colorectal carcinoma (CRC) to identify novel proteins with altered expression in CRC. Each pair of tumor and normal tissue specimens from 12 CRC patients was analyzed, and approximately 5000 NBS-labeled paired peaks were quantified. Peaks with altered signal intensities (>1.5-fold) and occurring frequently in the samples (>70%) were selected, and 128 proteins were identified by MS/MS analyses as differentially expressed proteins in CRC tissues. Many proteins were newly revealed to be CRC related; 30 were reported in earlier studies of CRC. Six proteins that were up-regulated in CRC (ZYX, RAN, RCN1, AHCY, LGALS1, and VIM) were further characterized and validated by Western blot and immunohistochemistry. All six were found to be CRC-localized, either in cancer cells or in stroma cells near the cancer cells. These results indicate that the proteins identified in this study are novel candidates for CRC markers, and that the NBS method is useful in proteome mining to discover novel biomarkers.     

High-intensity multi-bunch beam generation by a photo-cathode RF gun

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a ‘BNL-type IV’ RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.     

Preparation of a crack-free rough titania coating on stainless steel mesh by electrophoretic deposition

TiO₂ (anatase) coating was prepared on stainless mesh by electrophoretic (EPD) process utilizing an isopropyl alcohol (IPA)-based suspension with submicron TiO₂ powder. When the deposition time was 30 s, a smooth thin coating was obtained. It remained crack-free even after sintering. Coating surface morphology was roughened by UV pre-illumination of the suspension. Photocatalytic decomposition of IPA to acetone and resultant electrochemical reaction at cathode during EPD provides heterogeneous deposition.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

The formation of graphene–titania hybrid films and their resistance change under ultraviolet irradiation

We report the fabrication of hybrid films of graphene and monolayer titania using a simple electrostatic self-assembly method. Ultraviolet (UV) responses of the hybrid films based on the graphene–titania structure were investigated. We observed that the resistance of the graphene–titania hybrid increased exponentially with UV irradiation time and decreased exponentially when UV was turned off. Time constants of the order of hundreds of seconds were identified and found to be sensitive to the gas environment of graphene. The UV response as well as the time constant is tunable by varying the number of titania layers. Our results confirmed that UV irradiation played a significant role in the resistance modulation of graphene as well as graphene–titania hybrid films.