Failure behavior of inclined thick adhesive joints with manufacturing defect

In this paper, numerical model of thick adhesive inclined joints has been prepared and validated against experimental test to study the effect of manufacturing defect on the joint strength. The inclined joint was made up of two laminate webs attached to a wedge by a layer of adhesive. Tensile tests were conducted on many thick adhesive joint specimens with two different geometries. One half of the symmetric test specimen was then modeled using finite element analysis in which cohesive zone modeling (CZM) was used to simulate the initiation and propagation of joint fracture. The progressive fracture through the adhesive layer and along adhesive-laminate interface was carefully examined. Based on inspection of the experimental test specimen, potential manufacturing defect types and locations were incorporated in the finite element model. The reduction in strength due to these manufacturing defects was used to predict the most critical flaw type in thick inclined joints. The differences between the “flawless” numerical model and the experimental test specimen was explained when these manufacturing defects were incorporated. The results were found to be consistent with the experimental tests.

     

Optimal cut-off for obesity and markers of metabolic syndrome for Ethiopian adults

Background

Metabolic syndrome (MetS) is defined as the presence of central obesity plus any two of the following markers: high triglycerides (>?150 mg/dl), low high density lipoprotein (HDL) cholesterol <?40 mg/dl in men and?<?50 mg/dl in women, hypertension (blood pressure?>?130/85 mmHg or use of antihypertensive medication), high fasting blood glucose (>?100 mg/dl or use of treatment for diabetes mellitus). Since recently, metabolic syndrome and obesity have become emerging problems of both low and middle income countries, although they have been the leading cause of morbidity and mortality in high income countries for the past decades. It has been indicated that the international anthropometric cut-off for detecting obesity is not appropriate for Ethiopians. This study developed optimal cut off values for anthropometric indicators of obesity and markers of metabolic syndrome for Ethiopian adults to enhance preventive interventions.

Methods

A total of 704 employees of Jimma University were randomly selected using their payroll as a sampling frame. Data on socio-demographic, anthropometry, clinical and blood samples were collected from February to April 2015. Receiver Operating Characteristic Curve analyses were used to determine optimal anthropometric cut-off values for obesity and markers of the metabolic syndrome. WHO indicators of obesity based on body fat percent (>?25% for males and?>?35% for females) were used as binary classifiers for developing anthropometric cut-offs. Optimal cut-off values were presented using sensitivity, specificity and area under the curve.

Results

The optimal cut-off for obesity using body mass index was 22.2 k/m² for males and 24.5 kg/m² for females. Similarly, the optimal waist circumference cut-off for obesity was 83.7 cm for males and 78.0 cm for females. The cut-off values for detecting obesity using waist to hip ratio and waist to height ratio were: WHR (0.88) and WHtR (0.49) for males, while they were 0.82 and 0.50 for females, respectively. Anthropometric cut-off values for markers of metabolic syndrome were lower compared to the international values. For females, the optimal BMI cut-offs for metabolic syndrome markers ranged from 24.8 kg/m² (triglycerides) to 26.8 kg/m² (fasting blood sugar). For WC the optimal cut-off ranged from of 82.1 cm (triglyceride) to 96.0 cm(HDL); while for WHtR the optimal values varied from 0.47(HDL) to 0.56(fasting blood sugar). Likewise, the optimal cut-offs of WHR for markers of metabolic syndrome ranged from 0.78(fasting blood sugar) to 0.89(HDL and blood pressure). For males, the optimal BMI cut-offs for metabolic syndrome markers ranged from 21.0 kg/m² (HDL) to 23.5 kg/m² (blood pressure). For WC, the optimal cut-off ranged from 85.3 cm (triglyceride) to 96.0 cm(fasting blood sugar); while for WHtR the optimal values varied from 0.47(BP, FBS and HDL) to 0.53(Triglyceride). Similarly, the optimal cut-offs of WHR form markers of metabolic syndrome ranged from 0.86(blood pressure) to 0.95(fasting blood sugar).

Conclusion

The optimal anthropometric cut-offs for obesity and markers of metabolic syndrome in Ethiopian adults are lower than the international values. The findings imply that the international cut-off for WC, WHtR, WHR and BMI underestimate obesity and metabolic syndrome markers among Ethiopian adults, which should be considered in developing intervention strategies. It is recommended to use the new cut-offs for public health interventions to curb the increasing magnitude of obesity and associated metabolic syndrome and diet related non-communicable diseases in Ethiopia.