Premature separation of centromere and aneuploidy: an indicator of high risk in unaffected individuals from familial breast cancer families?

OBJECTIVES: Injury is the leading cause of death in the male working population of Brazil. An important fraction of these deaths are work related. Very few cohort studies of steel workers, and none from developing countries, have reported on mortality from injuries. This paper analyses mortality from work and non-work related injuries among Brazilian steel workers. METHODS: Deaths during employment from 1 January 1977 to 30 November 1992 were analysed in a cohort of 21,816 male steel workers. Mortality rates specific for age and calendar year among the workers were compared with those of the male population of the state where the plant is located. Work related injuries were analysed by comparing the mortality rates for different subgroups of the cohort. RESULTS: The number of deaths (391) was less than half that expected based on death rates of the general population. Over 60% (242) of deaths were due to injuries. Mortality from most causes was substantially below that in the general population, but that from unintentional injury, was 50% above that of the general population. Standardised mortality ratios (SMRs) were highest for the youngest and the oldest employees and for labourers and clerical workers. Mortality from motor vehicle injury was twice that expected from population rates (SMR = 209, 95% confidence interval (95% CI) 176-244). There was a 67% fall in the age adjusted mortality from occupational injuries in the study period. CONCLUSION: The healthy worker effect in this cohort was greater than that commonly found in studies of occupational groups in developed countries, probably because of a greater socioeconomic gap between employed and unemployed populations in Brazil, and unequal distribution of health care resources. Mortality was especially high for motor vehicle injuries. The fall in mortality from occupational injuries during the study period was probably due to improvement in safety standards, increased automation, and better medical care. There is a need to investigate risk factors for unintentional injuries among steel workers, especially those due to motor vehicle injuries. Prevention of occupational and nonoccupational injuries should be a main priority in Brazil.     

An efficient approach for face recognition based on common eigenvalues

In this paper, a simple technique is proposed for face recognition among many human faces. It is based on the polynomial coefficients, covariance matrix and algorithm on common eigenvalues. The main advantage of the proposed approach is that the identification of similarity between human faces is carried out without computing actual eigenvalues and eigenvectors. A symmetric matrix is calculated using the polynomial coefficients-based companion matrices of two compared images. The nullity of a calculated symmetric matrix is used as similarity measure for face recognition. The value of nullity is very small for dissimilar images and distinctly large for similar face images. The feasibility of the propose approach is demonstrated on three face databases, i.e., the ORL database, the Yale database B and the FERET database. Experimental results have shown the effectiveness of the proposed approach for feature extraction and classification of the face images having large variation in pose and illumination.     

Production of agrochemical from waste polyesters

In this study, agrochemical was produced from waste polyesters. Reactions of waste polyesters [poly (ethylene terephthalate) (PET) and poly (butylene terephthalate) (PBT)] powder with ethylene glycol (EG) in the presence of tetrahydrofurane (THF) using 0.003 mol lead acetate as a catalyst were carried out in a batch reactor at 470 K and at atmospheric pressure conditions. Reactions were undertaken with various particle size ranges from 50 to 512.5 μm, and reaction time from 30 to 70 min for reactions of polyesters. Low molecular weight product of polyester was obtained during this process. In the next stage, hydroxylamine hydrochloride (HAHC), cyclohexylamine (CHA), and potasium hydroxide (KOH) solution were introduced to convert low molecular weight product of polyester into terephthalohydroxamic acid (TPHA) by introduction of HCl (Hydrochloric Acid) as per stoichiometric requirement. TPHA can be used as an agrochemical (insecticide) with appreciable efficiency. To increase the polyester conversion rate, external catalyst (0.003 mol lead acetate) was introduced during the reaction. The product was deposited on the surface of unreacted polyester, which was removed from the surface by introducing dimethyl sulfoxide (DMSO). To accelerate the reaction rate, DMSO, CHA, and THF were introduced during the reaction, which has an industrial significance. Depolymerization of polyester was proportional to the reaction time. Depolymerization of polyester was inversely proportional to the particle size of polyester. Analyses of value‐added product (TPHA) and byproducts [EG and BD (1,4‐butanediol)] as well as polyesters were undertaken. A kinetic model is developed, and experimental data simulated with it, which was consistent with the model. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2504–2510, 2006     

Homogeneous asymmetric hydrogenation ofo-chloroacetophenone to enantiomerically pureo-chloro-(1-phenyl)ethanol catalyzed by BINAP-Ru(II) complex

The BINAP-Ru(II) catalyst (2,2-bis(diphenylphosphino)-1,1-binaphthyl)chloro(p-cymene)rutheniun chloride is found to be highly active and enantioselective for homogeneous asymmetric hydrogenation of o-chloroacetophenone to optically pureo-chloro-(1-phenyl)ethanol. In contrast to results of Noyori and coworkers, no organic and inorganic bases are required to obtain high activities and enantioselectivities     

Preservation of strawberries by modified atmosphere packages with other treatments

The impact of modified atmosphere packaging (MAP), in combination with ozone treatment and an edible film coating, on the preservation of strawberries was studied. A combination of 2.5% O₂ with 15% CO₂ was the optimum gas composition for the MAP of strawberries and prolonged shelf‐life by 4–6 days. When the strawberries were pre‐treated with a 4.3 mg/m³ ozone water dip and an edible coating prior to packaging, the shelf‐life was extended to 8–10 days. The results showed that two treatments [No.1: polyvinyl alcohol 134 (2%); monostearatacylglycerol (0.5%); phytic acid (0.05%); sorbitol (0.05%); sodium alginate (0.1%); absolute alcohol (8%): No.2: polyvinyl alcohol 134(1%); soluble starch (1%); glucose (1%); sucrose (1%); sodium alginate (0.1%); sorbitol (0.05%)] gave the best effects on strawberry quality and shelf‐life. All treatments (Nos 1–4) were obviously superior to check experiments for soluble sugar, ascorbic acid, acidity and anthocyanin. Furthermore, the treatments gave superior results for browning index, commodity ratio and permeability of the cell membrane. Copyright © 2006 John Wiley & Sons, Ltd.     

Metronidazole-loaded nanostructured lipid carriers to improve skin deposition and retention in the treatment of rosacea

The objective of the present investigation was to improve the skin deposition and retention of metronidazole (MTZ) in rosacea therapy by incorporating it into nanostructured lipid carriers (NLCs). The main challenge in this endeavor was the partial hydrophilicity of MTZ, which mandated careful selection of excipients, including solid and liquid lipids, surfactants, and their ratios in combination. NLCs were produced by the phase inversion temperature method and finally converted into a gel for topical application. The prepared nanoparticles were evaluated for their particle size, zeta potential, entrapment efficiency, solid-state characteristics, surface morphology, in vitro drug release, and permeation through excised skin. The gel was additionally characterized for its pH, drug content, viscosity, and spreadability. The prepared nanoparticles were spherical in shape and of size less than 300?nm. Incorporation of judiciously chosen excipients made possible a relatively high entrapment efficiency of almost 40%. The drug release was found to be biphasic, with an initial burst release followed by sustained release up to 8?hours. In comparison to the plain drug gel, which had a tissue deposition of 11.23%, the NLC gel showed a much superior and desirable deposition of 26.41%. The lipophilic nature of the carrier, its size, and property of occlusion enabled greater amounts of drug to enter and be retained in the skin, simultaneously minimizing permeation through the skin, i.e. systemic exposure. The results of the study suggest that NLCs of anti-rosacea drugs have the potential to be used in the therapy of rosacea.     

Effect of Nd3+ substitution on structural and magnetic properties of Mg–Cd ferrites synthesized by microwave sintering technique

Nd~(3+) substituted spinel ferrites with formula Mg_xCd_(1-x)Nd_(0.03)Fe_(1.97)O_4(x = 0.0.2,0.4,0.6.0.8 and 1.0)were prepared by oxalate co-precipitation method using novel microwave sintering technique. AR grade sulphates were used as starting chemicals. The samples were sintered at optimized power of 70 W for10 min in a microwave oven(800 W). The structural analysis of these samples was done by using X-ray diffraction, scanning electron microscope and Fourier transform IR techniques. The XRD analysis of the synthesized ferrite confirms the formation of cubic spinel structure of ferrite. The influence of Nd3+substitution on various structural parameters of Mg-Cd ferrites was reported. IR study indicates the spectra contain two intense absorption bands around 600 and 400 cm~(-1) in addition with four extra bands. The magnetic properties of all ferrites were studied by using a vibration sample magnetometer.The crystallite and grain size dependant magnetic properties are observed. The composition Mg_(0.6)Cd_(0.4)Nd_(0.03)Fe_(1.97)O_4 has better magnetic properties that can be used in recording media. The fast synthesis of spinel ferrites is yielded due to use of the microwave sintering technique.     

TiO2 nanoparticle embedded nitrogen doped electrospun helical carbon nanofiber-carbon nanotube hybrid anode for lithium-ion batteries

TiO₂ nanoparticles decorated nitrogen (N) doped helical carbon nanofiber (CNF)-carbon nanotube (CNT) hybrid material is prepared by low-cost electrospinning technique followed by hydrothermal method. Morphological investigations establish helical structure of CNFs with hierarchical growth of CNTs around CNFs. The hybrid material shows a high specific surface area of 295.17 m² g^?1 with nanoporous structure. X-ray photoelectron spectroscopic studies establish Ti–O–C/Ti–C bond mediated charge transfer channel between TiO₂ nanoparticles and carbon structures with the success of N doping in CNFs. The electrospun hybrid material delivered high reversible charge capacities of 316 mAh g^?1 (100th cycle) and 244 mAh g^?1 (100th cycle) at a current density of 75 mA g^?1 and 186 mA g^?1 respectively. The charge capacities obtained for different applied current densities are higher than the conventional graphitic microporous microbeads anode. Results indicate that the hybrid material reported here shows high performance compare to graphite for LIBs.