A practical Equivalent Electrical Circuit model for Proton Exchange Membrane Fuel Cell (PEMFC) systems

An alternative Equivalent Electrical Circuit for Proton Exchange Membrane Fuel Cells is modelled in this study. Both I–V characteristics and H₂ consumptions corresponding to generated power under load and no-load conditions are investigated. For this purpose, H₂ consumptions and I–V characteristics of three different sized PEMFCs are tested. There is a very good harmony between the model results and measured values (relative error %0.7, %6.4 and %2.5 for FC-A, FC-B and FC-C respectively). In the proposed model current passes only on parallel resistance and not on serial resistance at no-load condition. Thus, a FC with higher parallel resistance should be preferred. Another key output of this study is that based on the proposed model, performance comparison of FCs can be performed with the parameters defined in this work. Proposals made in this study can easily be used for performance analysis of FCs under for both steady state and transient analysis.     

Colour and COD removal from textile effluent by coagulation and advanced oxidation processes

The aim of this study was to compare the performance of coagulation, Fenton's oxidation (Fe²⁺/H₂O₂) and ozonation for the removal of chemical oxygen demand (COD) and colour from biologically pretreated textile wastewater. FeSO₄ and FeCl₃ were used as coagulants at varying doses and varying colour removal efficiency was measured. For the Fenton process, COD and colour removal efficiencies were found to be 78% and 95% for the Fenton process, and to be 64% and 71% for the Fenton-like process (Fe³⁺/H₂O₂), respectively. Ozonation experiments were conducted at different initial pH values and fixed ozone doses. Ozonation resulted in 43% COD and 97% colour removal whereas these rates increased to 54% and 99% when 5 mg/l hydrogen peroxide was added to the wastewater before ozonation at the same dose. The operating costs of all proposed treatment systems were also evaluated in this study.     

Fusion of smartphone sensor data for classification of daily user activities

Multimedia Tools and Applications - New mobile applications need to estimate user activities by using sensor data provided by smart wearable devices and deliver context-aware solutions to users...     

Production of NiO,NiO/Ag,NiO/Au,and NiO/Pt hollow spheres by using block copolymer stabilized microspheres as a template

Hollow spheres of nickel oxide (NiO) and silver, gold, and platinum nanoparticle loaded NiO composites were successfully produced by using polystyrene (PS) latexes as hard template. Due to the presence of tertiary amine based diblock copolymer stabilizer on the surface of PS, the tertiary amine functional groups provided homogene deposition of nickel hydroxide, and then the precursor NiO salt production on the surface of PS latexes with a controlled precipitation technique. Then, NiO and NiO/metal NP hollow spheres were produced by calcination at 600 °C. Thermogravimetric analysis indicated that the amounts of NiO and NiO-composite after calcination were in the range of 21.1–29.7 wt%. The diameters of metal oxide spheres were in the range of 2.0–2.7 μm and the shell thickness were in the range of 250–350 nm. These structures had very low densities due to their porous and hollow structures and had outer layers with highly rough surfaces due to formation of nanosheets, which may offer important advantages for catalysis studies.     

Dynamic stability of a shaft system connected through a Hooke's joint

Dynamic stability of the torsional vibrations of a shaft system consisting of two torsionally elastic shafts interconnected through a Hooke's joint is investigated by means of a two degree-of-freedom model. The linearized equations of motion are shown to consist of a set of Mathieu-Hill equations and stability of their solutions is analyzed by means of a monodromy matrix method. Results are presented in the form of stability charts constructed on various parameter planes visualizing the effect of various selected pairs of system parameters on the stability.     

Revealing determinants of two‐phase dynamics of P53 network under gamma irradiation based on a reduced 2D relaxation oscillator model

This study proposes a two‐dimensional (2D) oscillator model of p53 network, which is derived via reducing the multidimensional two‐phase dynamics model into a model of ataxia telangiectasia mutated (ATM) and Wip1 variables, and studies the impact of p53‐regulators on cell fate decision. First, the authors identify a 6D core oscillator module, then reduce this module into a 2D oscillator model while preserving the qualitative behaviours. The introduced 2D model is shown to be an excitable relaxation oscillator. This oscillator provides a mechanism that leads diverse modes underpinning cell fate, each corresponding to a cell state. To investigate the effects of p53 inhibitors and the intrinsic time delay of Wip1 on the characteristics of oscillations, they introduce also a delay differential equation version of the 2D oscillator. They observe that the suppression of p53 inhibitors decreases the amplitudes of p53 oscillation, though the suppression increases the sustained level of p53. They identify Wip1 and P53DINP1 as possible targets for cancer therapies considering their impact on the oscillator, supported by biological findings. They model some mutations as critical changes of the phase space characteristics. Possible cancer therapeutic strategies are then proposed for preventing these mutations’ effects using the phase space approach.Inspec keywords: physiological models, cellular biophysics, cancer, difference equations, delays, enzymes, biochemistry, molecular biophysics, gamma‐rays, radiation therapyOther keywords: two‐phase dynamics model, P53 network, gamma irradiation, 2D relaxation oscillator model, ATM model, Wip1 variables, p53‐regulators, cell fate decision, excitable relaxation oscillator, Wip1 time delay, state‐dependent delay differential equation, cell cycle arrest, cell apoptosis, cancer therapies, Wip1 overexpression, Wip1 downregulation, ATM deficiency, Mdm2 overexpression, Mdm2 downregulation, mutation effects, phase space approach     

Signal transformation and interpolation based on modified DCT synthesis

This paper proposes a novel signal transformation and interpolation approach based on the modification of DCT (Discrete Cosine Transform). The proposed algorithm can be applied to any periodic or quasi periodic waveform for time scale and/or pitch modification purposes in addition to signal reconstruction, compression, coding and packet lost concealment. The proposed algorithm has two advantages:

• (i) 

  Since DCT does not have the explicit phase information, one does not need the cubic spline interpolation of the phase component of the sinusoidal model.

• (ii) 

  The parameters to be interpolated can be reduced because of the energy packing efficiency of the DCT. This is particularly important if signal synthesis is carried out on a remote location from the transmitted parameters.

The results are presented on periodic waveforms and on speech signal in order to appreciate the fidelity of the proposed algorithm. In addition, the proposed method is compared with TD-PSOLA, sinusoidal model and phase vocoder algorithms. The results are presented in objective PESQ scores for time scale modification and output files are provided as supplementary material,¹ for subjective evaluation, for packet lost concealment. Results prove that the proposed modification of the DCT synthesis provides a favorable algorithm for specialists working in the signal processing area.     

Functional Diversity,Absorptive Capability and Product Success: The Moderating Role of Project Complexity in New Product Development Teams

Absorptive capability appears to be an appealing concept in the technology and innovation management literature. Though absorptive capability attracts researchers from a variety of disciplines, team‐level empirical research on it is scant. In this study, we operationalized team absorptive capability as a multidimensional construct involving knowledge acquisition, assimilation and exploitation. This study also explores the moderating effect of project complexity between team absorptive capability and new product success. In studying the data from 239 new product development projects using partial least squares structural equation modelling, we found that team functional diversity is a significant determinant of team absorptive capability. Moreover, regarding the relationships between team absorptive capability and new product success, we uncovered that (i) new product success is dependent on the ability to understand the acquired knowledge, and (ii) the teams appear to be more cautious in putting the assimilated knowledge into practice to the extent that project complexity increases.     

PETOOL: MATLAB-based one-way and two-way split-step parabolic equation tool for radiowave propagation over variable terrain

A MATLAB-based one-way and two-way split-step parabolic equation software tool (PETOOL) has been developed with a user-friendly graphical user interface (GUI) for the analysis and visualization of radio-wave propagation over variable terrain and through homogeneous and inhomogeneous atmosphere. The tool has a unique feature over existing one-way parabolic equation (PE)-based codes, because it utilizes the two-way split-step parabolic equation (SSPE) approach with wide-angle propagator, which is a recursive forward–backward algorithm to incorporate both forward and backward waves into the solution in the presence of variable terrain. First, the formulation of the classical one-way SSPE and the relatively-novel two-way SSPE is presented, with particular emphasis on their capabilities and the limitations. Next, the structure and the GUI capabilities of the PETOOL software tool are discussed in detail. The calibration of PETOOL is performed and demonstrated via analytical comparisons and/or representative canonical tests performed against the Geometric Optic (GO) + Uniform Theory of Diffraction (UTD). The tool can be used for research and/or educational purposes to investigate the effects of a variety of user-defined terrain and range-dependent refractivity profiles in electromagnetic wave propagation.

Program summary

Program title: PETOOL (Parabolic Equation Toolbox)Catalogue identifier: AEJS_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEJS_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 143 349No. of bytes in distributed program, including test data, etc.: 23 280 251Distribution format: tar.gzProgramming language: MATLAB (MathWorks Inc.) 2010a. Partial Differential Toolbox and Curve Fitting Toolbox requiredComputer: PCOperating system: Windows XP and VistaClassification: 10Nature of problem: Simulation of radio-wave propagation over variable terrain on the Earth?s surface, and through homogeneous and inhomogeneous atmosphere.Solution method: The program implements one-way and two-way Split-Step Parabolic Equation (SSPE) algorithm, with wide-angle propagator. The SSPE is, in general, an initial-value problem starting from a reference range (typically from an antenna), and marching out in range by obtaining the field along the vertical direction at each range step, through the use of step-by-step Fourier transformations. The two-way algorithm incorporates the backward-propagating waves into the standard one-way SSPE by utilizing an iterative forward–backward scheme for modeling multipath effects over a staircase-approximated terrain.Unusual features: This is the first software package implementing a recursive forward–backward SSPE algorithm to account for the multipath effects during radio-wave propagation, and enabling the user to easily analyze and visualize the results of the two-way propagation with GUI capabilities.Running time: Problem dependent. Typically, it is about 1.5 ms (for conducting ground) and 4 ms (for lossy ground) per range step for a vertical field profile of vector length 1500, on Intel Core 2 Duo 1.6 GHz with 2 GB RAM under Windows Vista.     

Decentralized overlapping control of a formation of unmanned aerial vehicles

Decentralized overlapping feedback laws are designed for a formation of unmanned aerial vehicles. The dynamic model of the formation with an information structure constraint in which each vehicle, except the leader, only detects the vehicle directly in front of it, is treated as an interconnected system with overlapping subsystems. Using the mathematical framework of the inclusion principle, the interconnected system is expanded into a higher dimensional space in which the subsystems appear to be disjoint. Then, at each subsystem, a static state feedback controller is designed to robustly stabilize the perturbed nominal dynamics of the subsystem. The design procedure is based on the application of convex optimization tools involving linear matrix inequalities. As a final step, the decentralized controllers are contracted back to the original interconnected system for implementation.