A power-efficient vertical handover with MIH-based network scanning through consistency check

We propose an power-efficient scanning scheme considering the consistency of the Information Element (IE) for the Media Independent Handover (MIH) based Vertical Handover. Since the Green IT is one of the key issues of the science, we suggested the power saving scheme by extending the information and the event service of the MIH framework to reduce the number of full scanning. We proposed the criteria to select the update MT to quantify the power consumption alongside various network scanning methods. Since the frequent and multiple network scanning incurred by small mobile terminals (MT) is considerable, the scanning avoidance is essential for the framework we suggest. The MIH Information Service (MIIS) provides many usable factors and features for the scanning avoidance. However, because of the absence of the criteria to select the update node, these values are not actually usable. Therefore, we suggest an Energy Efficient Function, which tests the validity of MIIS values and makes a decision on whether to avoid the scanning or not.     

Microbial fuel cells for bioelectricity generation through reduction of hexavalent chromium in wastewater: A review

The study proposes the use of microbial fuel cell (MFC) technology to reduce toxic Cr(VI) present in industrial wastewater to less toxic trivalent chromium [Cr(III)], while generating electricity through a bioelectrochemical oxidation-reduction process. Factors influencing the treatment process and electricity generation include the concentration of Cr(VI) in wastewater, substrate types used for anodes, types of microorganisms involved, types of cathode and anode, surface area of the cathode and anode, and pH and temperature of cathodic and anodic solutions. While other heavy metals in wastewater may be removed by MFC technology, Cr(VI) removal is more efficient in terms of electricity generation. Previous research indicated that the maximum electrical power generated by Cr(VI) removal through the use of MFCs is 1600 mW/m², which is expected to increase as the factors affecting this process are optimized. Based on current data, MFC-based electricity generation along with Cr(VI) removal is a potential future source of sustainable energy. However, research priorities need to focus on reducing the cost of MFC technology by using economical and effective materials and increasing electricity production.     

Spectroscopic and chemical-kinetic analysis of the phases of HCCI autoignition and combustion for single- and two-stage ignition fuels

The temporal phases of autoignition and combustion in an HCCI engine have been investigated in both an all-metal engine and a matching optical engine. Gasoline, a primary reference fuel mixture (PRF80), and several representative real-fuel constituents were examined. Only PRF80, which is a two-stage ignition fuel, exhibited a “cool-flame” low-temperature heat-release (LTHR) phase. For all fuels, slow exothermic reactions occurring at intermediate temperatures raised the charge temperature to the hot-ignition point. In addition to the amount of LTHR, differences in this intermediate-temperature heat-release (ITHR) phase affect the fuel ignition quality. Chemiluminescence images of iso-octane show a weak and uniform light emission during this phase. This is followed by the main high-temperature heat-release (HTHR) phase. Finally, a “burnout” phase was observed, with very weak uniform emission and near-zero heat-release rate (HRR). To better understand these combustion phases, chemiluminescence spectroscopy and chemical-kinetic analysis were applied for the single-stage ignition fuel, iso-octane, and the two-stage fuel, PRF80. For both fuels, the spectrum obtained during the ITHR phase was dominated by formaldehyde chemiluminescence. This was similar to the LTHR spectrum of PRF80, but the emission intensity and the temperature were much higher, indicating differences between the ITHR and LTHR phases. Chemical-kinetic modeling clarified the differences and similarities between the LTHR and ITHR phases and the cause of the enhanced ITHR with PRF80. The HTHR spectra for both fuels were dominated by a broad CO continuum with some contribution from bands of HCO, CH, and OH. The modeling showed that the CO+O→CO₂+hν reaction responsible for the CO continuum emission tracks the HTHR well, explaining the strong correlation observed experimentally between the total chemiluminescence and HRR during the HTHR phase. It also showed that the CO continuum does not contribute to the ITHR and LTHR chemiluminescence. Bands of H₂O and O₂ in the red and IR regions were also detected during the HTHR, which the data indicated were most likely due to thermal excitation. The very weak light emission in the “burnout” phase also appeared to be thermal emission from H₂O and O₂.     

Formation of organic chloramines during water disinfection - chlorination versus chloramination

Many of the available studies on formation of organic chloramines during chlorination or chloramination have involved model organic nitrogen compounds (e.g., amino acids), but not naturally occurring organic nitrogen in water. This study assessed organic chloramine formation during chlorination and chloramination of 16 natural organic matter (NOM) solutions and 16 surface waters which contained dissolved organic nitrogen (DON). Chlorination rapidly formed organic chloramines within 10 min, whereas chloramination formed organic chloramination much more slowly, reaching the maximum concentration between 2 and 120 h after the addition of monochloramine into the solutions containing DON. The average organic chloramine formation upon addition of free chlorine and monochloramine into the NOM solutions were 0.78 mg-Cl₂/mg-DON at 10 min and 0.16 mg-Cl₂/mg-DON at 24 h, respectively. Organic chloramine formation upon chlorination and chloramination increased as the dissolved organic carbon/dissolved organic nitrogen (DOC/DON) ratio decreased (i.e., DON contents increased). Chlorination of molecular weight (10,000 Da) fractionated water showed that molecular weight of DON would not impact the amount of organic chloramines produced. Comparison of three different disinfection schemes at water treatment plants (free chlorine, preformed monochloramine, and chlorine/ammonia additions) indicated organic chloramine formation could lead to a possible overestimation of disinfection capacity in many chloraminated water systems that add chlorine followed by an ammonia addition to form monochloramine.     

Anionic Redox Chemistry as a Clue for Understanding the Structural Behavior in Layered Cathode Materials

The anionic redox chemistries of layered cathode materials have been in focus recently due to an intriguing phenomenon that cannot be described by the number of electrons of transition metal ions. However, even though several studies have investigated the anionic redox chemistry of layered materials in terms of the charge compensation, the relationship between the origin of the structural behavior and anionic redox chemistry in layered materials remains poorly understood. In addition, a simultaneous redox process of transition metal ions could occur through the d bands interaction. Here, it is demonstrated that the anionic redox chemistry is associated with the anisotropic structural behavior of the layered cathode materials albeit without providing additional capacities exceeding the theoretical values. These findings will provide a foundation of a new chapter in the understanding of the properties of materials.     

Critical Factors to Understanding the Electrochemical Performance of All-Solid-State Batteries: Solid Interfaces and Non-Zero Lattice Strain

All-solid-state lithium batteries have been developed to secure safety by substituting a flammable liquid electrolyte with a non-flammable solid electrolyte. However, owing to the nature of solids, interfacial issues between cathode materials and solid electrolytes, including chemical incompatibility, electrochemo-mechanical behavior, and physical contact, pose significant challenges for commercialization. Herein, critical factors for understanding the performance of all-solid-state batteries in terms of solid interfaces and non-zero lattice strains are identified through a strategic approach. The initial battery capacity can be increased via surface coating and electrode-fabrication methods; however, the increased lattice strain causes significant stress to the solid interface, which degrades the battery cycle life. However, this seesaw effect can be alleviated using a more compacted electrode microstructure between the solid electrolyte and oxide cathode materials. The compact solid interfaces contribute to low charge-transfer resistance and a homogeneous reaction between particles, thereby leading to improved electrochemical performance. These findings demonstrate, for the first time, a correlation between the uniformity of the electrode microstructure and electrochemical performance through the investigation of the reaction homogeneity among particles. Additionally, this study furthers the understanding of the relationship between electrochemical performance, non-zero lattice strain, and solid interfaces.     

The Effect of Colour Contrast on Consumers' Attentive Behaviours and Perception of Fresh Produce

The market for fruits and vegetables has received considerable interest in recent years, with much of its growth attributed to consumer interest in nutrition and health. Quality has been indicated to be the most important factor in produce sales, and appearance is of noted significance with regard to perceived quality. The broad objectives of this research were to identify the impact of simultaneous colour contrast (i.e. the produce viewed through a mesh bag) on (a) attentive behaviours as measured by eye tracking and (b) perceived quality, visual appeal and purchase intention as measured with a Likert scale. To accomplish these objectives, six different types of produce (red apples, oranges, lemons, green apples, purple onions and white onions) were photographed with four differently coloured mesh treatments: the same (as the produce), complementary, complementary‐analogous and analogous. Visual stimuli were then presented during the eye tracking study and in a subsequent questionnaire. Colour contrast was found to have a significant effect on both resultant eye tracking variables [number of visual fixations (p < 0.001) and time spent (p < 0.001)]. Produce shown with mesh of the same, or an analogous colour, induced significantly more visual fixations and more time than those depicted with complementary or complementary‐analogous treatments. Subsequent to the eye tracking study, subjects were shown the stimuli and asked to rate the expected quality, visual appeal and their purchase intention for the 24 photographs (6 types of produce × 4 colour contrasts) by using a Likert scale. Pairwise comparisons suggested that produce packaged in the same or analogous mesh were perceived by subjects to be of higher quality, more visually appealing and evoked a higher level of purchase intention than those packaged in complementary or complementary‐analogous mesh (α = 0.05). Copyright © 2012 John Wiley & Sons, Ltd.     

Mobile collaborative medical display system

Because of recent advances in wireless communication technologies, the world of mobile computing is flourishing with a variety of applications. In this study, we present an integrated architecture for a personal digital assistant (PDA)-based mobile medical display system that supports collaborative work between remote users. We aim to develop a system that enables users in different regions to share a working environment for collaborative visualization with the potential for exploring huge medical datasets. Our system consists of three major components: mobile client, gateway, and parallel rendering server. The mobile client serves as a front end and enables users to choose the visualization and control parameters interactively and cooperatively. The gateway handles requests and responses between mobile clients and the rendering server for efficient communication. Through the gateway, it is possible to share working environments between users, allowing them to work together in computer supported cooperative work (CSCW) mode. Finally, the parallel rendering server is responsible for performing heavy visualization tasks. Our experience indicates that some features currently available to our mobile clients for collaborative scientific visualization are limited due to the poor performance of mobile devices and the low bandwidth of wireless connections. However, as mobile devices and wireless network systems are experiencing considerable elevation in their capabilities, we believe that our methodology will be utilized effectively in building quite responsive, useful mobile collaborative medical systems in the very near future.     

Quantitative determination of a subsurface defect of reference specimen by lock-in infrared thermography

This paper describes the quantitative determination of the sizes and locations of subsurface defects using lock-in infrared thermography. A phase (or temperature) difference between the defect area and the healthy area indicates the qualitative location and size of the defect. To accurately estimate these parameters, the shearing-phase technique has been employed, where the inspected image is shifted by a certain number of pixels to obtain a shifted image while subtraction of one image from the other gives the shearing-phase distribution. The shearing-phase distribution has maximum, minimum, and zero points that help determine quantitatively the size and location of the subsurface defect. Experimental results for a steel plate with artificial subsurface defects show good agreement with actual values.     

Benefit of filtration in physical water treatment for the mitigation of mineral fouling in heat exchangers

The objective of the present study was to investigate the benefit of filtration in the physical water treatment used to mitigate mineral scale build-up in heat exchangers. Two types of filters were used: a 5-μm cartridge fabric filter and a sand filter with 20-μm pores, both of which were used at a side-stream loop in a laboratory cooling tower. Heat transfer fouling experiments were conducted using a double-pipe heat exchanger with cooling water at 5 and 8 cycles of concentration with a make-up water hardness of 200–240 ppm. The test results demonstrated that the filtration enhanced the performance of the PWT synergistically, resulting in a near initial peak heat transfer performance in the double-pipe heat exchanger.