Measurement of internal stresses in coatings using time resolved fluorescence

This paper describes a new nondestructive technique for detecting internal stresses in coatings using time resolved fluorescence. The measurement principle is based upon an experimental result that the decay time of fluorescence from poly(3-octylthiophene), P3OT, dispersed in uniaxially-stretched polymer films decreases with increasing tensile stress acting on the films. Internal stresses in the clear coat and in the base coat of a multilayer structure, which was composed of electrodeposited coat, surface coat, base coat, and clear coat, were estimated from the decay time of fluorescence from P3OT in both coats. The order of internal stresses in the clear coat and base coat of the multilayer system was 1 MPa. When the coatings were piled up, the internal stress decreased as the distance from a metal substrate was increased. It was found that moisture and temperature influenced internal stresses in the clear coat rather than in the base coat. Internal stress in the clear coat, which was one layer coated on a metal substrate, was measured by the traditional bimetallic method or by the time resolved fluorescence technique. Comparing both methods, it was concluded that the time resolved fluorescence technique gave reliable values for internal stresses in coatings.     

Measurement of residual stresses in injection‐molded polymer parts by time‐resolved fluorescence

Time‐resolved fluorescence properties of 9‐methylanthracene (9MAn) dispersed in film of polyvinylchloride (PVC) containing carbon black were studied under tensile loadings. The fluorescence lifetime of 9MAn decreased from 5.70 to 5.55 ns, whereas the stresses acting on the films increased from 0 to 3 MPa. The change in fluorescence lifetimes of 9MAn during the stress relaxation process showed that the fluorescence lifetimes were correlated with the stresses, not with the strains. The results suggest that 9MAn is a useful probe for monitoring stresses acting on the matrix. With the use of the fluorescence properties of 9MAn, the residual tensile stresses on the skin‐layer of PVC injection‐molded test pieces were estimated. The estimated residual stresses were about ～ 1 MPa. The residual stresses were relaxed to 0 MPa with annealing at 100°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2600–2603, 2002     

Bending of ionic polymer gel caused by swelling under sinusoidally varying electric fields

Deformation of poly(vinyl alcohol)–poly(sodium acrylate) composite hydrogel (PVA–PAA gel) under sinusoidally varying electric fields was studied in electrolyte solutions. The PVA–PAA gel was prepared by repeatedly freezing and thawing a mixed solution of PVA and polyacrylic acid. A cyclic bending–straightening motion of the PVA–PAA gel rods of about 1 mm in diameter have been observed in Na₂CO₃ aqueous solutions under the fields. The PVA–PAA gel had a response time of less than several hundreds milliseconds. The bending has also been observed in organic solvents containing an electrolyte when the organic solvent is electrolyzed. It was found that the motion of the gel under electric fields of less than 1 Hz occurred mainly through swelling due to the change of the osmotic pressure based upon the difference of the ion concentration. However, it has not been determined whether the motion at higher frequencies is caused by the osmotic effect. © 1993 John Wiley & Sons, Inc.     

Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass

Mechanical deformation of Pd₄₀Ni₄₀P₂₀ was characterized in compression over a wide strain rate range (3.3×10⁻⁵ to 2×10³ s⁻¹) at room temperature. The compression sample fractured with a shear plane inclined 42 degree with respect to the loading axis, in contrast to 56 degree for the case of tension. This suggests the yielding of the material deviates from the classical von Mises yield criterion, but follows the Mohr-Coulomb yield criterion. Fracture stress as well as strain was found to decrease with increasing applied strain rate. The compressive stress (1.74 GPa) was also found to be higher than the tensile fracture stress at a quasi-static strain rate. Close examination of the stress–strain curves revealed that localized shear might have occurred at a compressive stress of about 1.4 GPa, much lower than the “apparent” yield stress of 1.74 GPa. However, the stress of 1.4 GPa for shear band initiation is almost the same as the fracture stress measured at a dynamic strain rate of 5×10² s⁻¹. These results suggested that the fracture of a bulk metallic glass is sensitive to the applied loading rate.     

Development of fault cause estimation method for distribution line

We are planning to develop the new Advanced Distribution Automation System (ADAS) equipped with optical communication network and sectionalizer with sensor for more grid reliability and efficiency on maintenance operation. The new system is featured with the function of fault cause or damaged part estimation. The new sectionalizer captures the waveform of electrical line surge originated by fault and the system analyzes the waveform for this function. This paper mainly introduces the system configuration of ADAS and an early stage examination of fault cause estimation technology.     

Time‐averaged spatial profile of Xe excitation efficiency in PDPs

Abstract— The Xe excitation efficiency for various Xe content was analyzed by monitoring the panel luminance and IR emission intensity. It was found that dependences of the Xe excitation efficiency and luminous efficacy on the sustain voltage show almost the same tendency. A decrease for increasing sustaining voltage was found in a low‐Xe‐content panel and an increase was found in a high‐Xe‐content panel. A reduction in the effective electron temperature and a reduction in plasma saturation contribute to the efficacy improvement. The time‐averaged spatial profile of the Xe excitation efficiency in PDPs was investigated by measuring the distribution of IR and blue‐phosphor emissions. The results show that the Xe excitation efficiency is similar in the cathode and anode regions even though the spatial and time development of the discharge in these regions is very different. An extended theory that takes into account not only the radiative transition process but also the collisional de‐excitation process from Xe** to Xe* is proposed for investigating the pressure dependence of the Xe excitation efficiency. By using the proposed theory, it was found that Xe excitation efficiency increases, attains a maximum value at 30% Xe, then decreases as the Xe content is increased, when the rate coefficient of the collisional de‐excitation process is less than 1.0 × 10^?10 cm³/sec.     

Power savings and enhancement of gray‐scale capability of LCD TVs with an adaptive dimming technique

Abstract— The luminance of a backlight unit for an LCD TV is adaptively and locally dimmed along with the input video signal in order to reduce the power consumption and also to improve the picture quality. By adopting the zero‐dimensional (0D), 1D, and 2D adaptive dimming techniques, a sample movie having 8.0% post‐gamma average picture levels (APL) could be displayed using 83%, 71%, and 50% of the original backlight power, respectively. For an adoption of the 2D dimming, an LED backlight is preferable. The adaptive‐dimming technique also allows the differential aging characteristics between the LED components and temperature dependence of color and luminance to be overcome. From simulations of a reduction in power consumption, it was found that 40 × 40 pixels is a unit of the local dimming, 30 frames for the sampling period, 24 dimming steps, and an equal‐signal‐step method for determining the dimming factor have been found to be appropriate. The gray‐scale capability of low‐luminance images can also be improved by dimming the backlight luminance and expanding the input signal. By using an LCD TV having an 8‐bit capability, an 11‐bit‐equivalent gray‐scale expression was experimentally proven.     

Efficient semi-supervised learning on locally informative multiple graphs

We address an issue of semi-supervised learning on multiple graphs, over which informative subgraphs are distributed. One application under this setting can be found in molecular biology, where different types of gene networks are generated depending upon experiments. Here an important problem is to annotate unknown genes by using functionally known genes, which connect to unknown genes in gene networks, in which informative parts vary over networks. We present a powerful, time-efficient approach for this problem by combining soft spectral clustering with label propagation for multiple graphs. We demonstrate the effectiveness and efficiency of our approach using both synthetic and real biological datasets.