High performance of silicided silicon-sidewall source and drain (S4D) structure

A silicided silicon-sidewall source and drain (S⁴D) structure is proposed for sub-0.1-μm devices. The merit of the S⁴D structure is that the series resistance of the source and drain is significantly reduced since the silicide layer is attached very close to the gate electrode and the silicon sidewall can be doped very highly. Thus, very high drain current drive can be expected, Another advantage of this structure is that the source and drain extensions are produced by the solid-phase diffusion of boron from the highly doped silicon-sidewall. Thus, shallow extensions with very high doping can be realized. A 75-nm gate length pMOSFET fabricated with this structure is shown to exhibit excellent electrical characteristics     

1.3 μm InAsyP1-y-InPstrained-layer quantum-well laser diodes grown by metalorganic chemicalvapor deposition

The authors have fabricated 1.3-μm InAsP-InP separate-confinement-heterostructure (SCH) strained-layer double-quantum-well (SL-DQW) laser diodes (LDs) by metalorganic chemical vapor deposition (MOCVD). A low threshold current density of 410 A/cm ² was obtained. The CW threshold current was as low as 1.8 mA at 20°C, and maximum CW operating temperature of 120°C was obtained. These characteristics are almost the same as those of well-designed GaInAsP-InP SL-QW LDs. Further improvement of the characteristics of InAsP-InP LDs is expected by optimizing the device structure     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved     

Oxidation of Fe (II) in sulfuric acid solutions with dissolved molecular oxygen

The oxidation of Fe(II) with dissolved molecular oxygen was studied in sulfuric acid solutions containing 0.2 mol . dm^-3 FeSO₄ at temperatures ranging from 343 to 363 K. In solutions of sulfuric acid above 0.4 mol . dm^-3, the oxidation of Fe (II) was found to proceed through two parallel paths. In one path the reaction rate was proportional to both [Fe²⁺]² and po₂, exhibiting an activation energy of 51.6 . kJ mol^-1. In another path the reaction rate was proportional to [Fe²⁺]², [SO_4-], and po₂ with an activation energy of 144.6 kJ . mol^-1. A reaction mechanism in which the SO_4- ions play an important role was proposed for the oxidation of Fe(II). In dilute solutions of sulfuric acid below 0.4 mol . dm^-3, the rate of the oxidation reaction was found to be proportional to both [Fe(II)]² and Po₂, and was also affected by [H⁺] and [SO_2- ⁴]. The decrease in [H⁺] resulted in the increase of reaction rate. The discussion was further extended to the effect of Fe (III) on the oxidation reaction of Fe (II).     

Chirality-antimicrobial relationship of quaternary ammonium cationics

Optically active and racemic quaternary ammonium cationics containing a chiral alkyl group, such as N,N-dimethyl-N-(1-phenylethyl)alkylammonium bromides were prepared and showed excellent antimicrobial properties against Gram positive and negative bacteria, with some exceptions, and against fungi. The influence of optical isomerism on their antimicrobial properties showed that the antimicrobial properties between racemic and optically active cationics were obscure. The order of activity of substituted alkyl groups was tetradecyl > dodecyl ° hexadecyl.     

An improved cryofixation method: cryoquenching of small tissue blocks during microwave irradiation

The metal contact method of rapid freezing is greatly improved by irradiating the specimen with microwaves at 2.45 GHz for a short period of time (50 ms), while pushing the specimen onto the surface of the copper block cooled by liquid N₂. The microwave irradiation, together with two technical improvements (a light-mass plunger and a recently developed β-gel shock absorber) for preventing bounce, produces a good freezing zone for squid retina, with high reproducibility for each experimental trial, extending from the contact surface to a depth of about 15 μm, which is comparable to the depth obtained by the metal contact method using liquid He in the absence of microwave irradiation. A good freezing zone was also experimentally demonstrated in specimens of rat liver and heart muscle. Microwave irradiation does not have appreciable effects on the ultrastructure of squid retina. The mechanism underlying the improvement in the rapid freezing under the microwave irradiation is discussed.     

Activation of thymic B cells by signals of CD40 molecules plus interleukin-10

We have previously found that thymic B cells, particularly thymic CD5+ B cells, show low responsiveness to the usual B cell stimulants such as lipopolysaccharide or anti-IgM plus interleukin (IL)-4, although they proliferate and produce antibodies after direct interaction with major histocompatibility complex class II-restricted T blasts. These findings raise the possibility that a CD40-CD40 ligand (L) interaction is involved in the activation of thymic B cells. In the present study, we therefore examine this possibility using CD40L-transfected Chinese hamster ovary (CHO) cells or anti-CD40 monoclonal antibody (mAb). When B cells in the spleen and peritoneal cavity were stimulated, they proliferated and produced immunoglobulin (Ig) in the presence of CD40L-CHO cells or anti-CD40 mAb alone. However, another signal delivered by IL-10 in addition to CD40L-CHO cells or anti-CD40 mAb was found to be necessary for thymic B cells to proliferate and secrete Ig. Other interleukins acting on B cells, such as IL-4, IL-5, and IL-6, had no effect on the activation of thymic B cells, which thus have unique characteristics not found in peripheral B cells. This report discusses the physiological significance of IL-10- and CD40-driven signals in the activation of thymic B cells.     

Requirement for transglutaminase in progesterone-induced decidualization of human endometrial stromal cells

Differentiation of endometrial stromal cells (decidualization) is essential for embryo implantation and maintenance of pregnancy. By sequential complementary DNA subtractive hybridization, one of the messenger RNAs (mRNA) induced by progesterone in human endometrial stromal cells decidualized in vitro was identified as that of a tissue transglutaminase type II (TGase). TGase mRNA was induced within 6 h after the addition of progesterone to the culture, and the effect was dose dependent. Both the TGase inhibitor monodansylcadaverine and oligodeoxynucleotide complementary to the TGase mRNA inhibited the decidualization, as assessed by PRL production and morphological transformation. Expression of TGase mRNA in human decidua and endometria exposed to high levels of progesterone in vivo was demonstrated by Northern blotting and in situ hybridization. These data suggest that TGase is necessary for the decidualization of human endometrial stromal cells and that clarification of the mechanism of action of TGase will facilitate further insight into the diagnosis and treatment of infertility.     

The equivalent transmission-path model-a tool for analyzing errorfloor characteristics due to intersymbol interference in Nakagami-Ricefading environments

Land mobile radio systems such as car telephones and handy personal terminals used outdoors have enjoyed a remarkable evolution. To design reliable mobile radio systems, however, it is vital to have a good understanding of the impact of wave propagation characteristics on digital transmission quality in a wide variety of mobile radio environments. A very simple but general scheme for calculating irreducible bit error rate (BER) (namely, BER floor) due to intersymbol interference in frequency-selective Nakagami-Rice fading environments has been developed. The scheme, which we call the equivalent transmission-path model, plays a role in connecting wave propagation with digital transmission characteristics in a general manner. Through computer simulations assuming various types of delay profiles, we first identify key parameters of Nakagami-Rice fading dominating principally the occurrence of irreducible errors and we develop a simple method for the calculation of irreducible BER utilizing the nature or the key parameters. Then we examine the accuracy of the scheme for various types of phase-shift keying (PSK) transmission systems. Finally, based on the scheme, we show calculation examples of BER floor characteristics in line-of-sight fading environments     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.