A new chip-thickness model for performance assessment of silicon carbide grinding

The chip-thickness models, used to assess the performance of grinding processes, play a major role in predicting the surface quality. In the present paper, an attempt has been made to develop a new chip-thickness model for the performance assessment of silicon carbide grinding by incorporating the modulus of elasticities of the grinding wheel and the workpiece in the existing basic chip-thickness model to account for elastic deformation. The new model has been validated by conducting experiments, taking the surface roughness as a parameter of evaluation .     

电液线爆成形工艺

通过电液线爆成形工艺试验，研究了各种技术参数与工艺参数在电液线爆成形过程中的相互关系，从而为电液线爆成形工艺的应用奠定了一定的基础。     

大庆石化公司聚烯烃树脂生产现状及发展

介绍了大庆石化公司现有聚烯烃装置的生产状况及聚烯烃新产品的开发．并从工艺角度与国内外同类装置进行了分析对比。最后简要介绍了大庆石化公司未来聚烯烃项目的发展规划。     

微量Y对Al—Li合金的析出相和力学性能的影响

研究了Y(0.1、0.5wt-％)对Al-Li-Cu—Mg—Zr合金析出相与拉伸性能的影响结果表明:Y可使铸态合金晶粒细化:促进β′(Al_3Zr)相析出:抑制δ′(Al_3Li)相的长大速度:使S′(Al_2CuMg)相的分布均匀化.添加0.1％Y能改善合金塑性而不降低强度:添加0.5％Y可使强度提高而塑性不降低     

Sm—Fe—N永磁体的研制

用机械合金化的方法及退火和渗氮处理,用纯Fe粉和Sm粉制备出内禀矫顽力为33.1kA/cm(41.6kOe)和磁能积为98.7kJ/m~3(12.4MGOe)的Sm—Fe—N永磁材料.用X射线衍射方法对样品制备过程中的机械合金化、晶化、渗氮过程中所形成的相进行了分析,用脉冲磁强计测量磁性实验结果发现,采用高能球磨机是机械合金化的方法制备高矫顽力永磁体的较好工具晶粒尺度为几十nm是获得高矫顽力Sm—Fe—N永磁体的重要因素,样品中存在的软磁第二相是磁滞回线中出现蜂腰形状的主要原因。     

RBBG方程的推导

本文对RBBG方程作了详细的推导。     

CONTROL OF CONSTRUCTION ACTIVITIES: III. FUZZY-BASED CONTROLLER

In this paper, a real-time fuzzy-based controller of construction activities is proposed. Because of the numerous uncertainties associated with construction activities, their control requires a different approach than the traditional feedback methods. These methods are essentially based on the knowledge of a transfer function that models the input/output relationships for the controlled system. For a highly complex and uncertain system such as a construction activity, a fuzzy-based control strategy was found to be a suitable and effective approach. The proposed control system is built in two main levels, the process and the activity levels. Each level comprises two main units, namely, the fuzzy controller and the self learning algorithm. The implementation of the control actions can be performed by either manipulating the states of the variables for the purpose of improving the process output, or changing the process behavior function for the same purpose. Practical examples are presented wherever possible to illustrate the proposed control strategy.     

延迟焦化加热炉炉管温度的红外监测

高负荷运行下的焦化加热炉,由于局部炉管过热引起管内结焦是一个普遍性的问题。利用红外测试仪器对炉管温度进行红外监测, 能及时掌握炉管和炉膛内温度分布情况, 因而可通过调节火嘴的燃烧,稳定炉内温度场, 以避免炉管局部过热, 延长加热炉运行周期。     

D—异抗坏血酸产生菌的筛选及诱变育种

本文从85株霉菌中,筛选得到了六株青霉属D-异抗坏血酸(EA)产生菌,其中点青霉2553产酸能力较高.通过UV、DES或~(60)Coγ-射线对其单孢子进行诱变处理,并进行随机筛选和理性化筛选,获得一最高正变株,其产酸水平达14.47mg/ml,较出发菌株提高50%.     

铝的阳极氧化和电解着色——Ⅳ.铝表面交流电解着古铜色的研究

本文研究铝表面上交流电解着古铜色的着色过程,试验和分析了溶液成份、着色时间、添加剂、着色温度、溶液pH值和杂质离子对着色过程的影响,确定了能够得到均匀的、重复性较好的古铜色膜的工艺条件。测试结果表明:该着色膜的耐蚀和耐热性能良好。