Optimal Water Allocation of Surface and Ground Water Resources Under Climate Change with WEAP and IWOA Modeling

Water Resources Management - The water evaluation and planning (WEAP) approach and the invasive weed optimization algorithm (IWOA) are herein employed to determine the optimal operating policies in...     

Predicting roadheader performance by using artificial neural network

With growing use of roadheaders in the world and its significant role in the successful accomplishment of a tunneling project, it is a necessity to accurately predict performance of this machine in different ground conditions. On the other hand, the existence of some shortcomings in the prediction models has made it necessary to perform more research on the development of the new models. This paper makes an attempt to model the rate of roadheader performance based on the geotechnical and geological site conditions. For achieving the aim, an artificial neural network (ANN), a powerful tool for modeling and recognizing the sophisticated structures involved in data, is employed to model the relationship between the roadheader performance and the parameters influencing the tunneling operations with a high correlation. The database used in modeling is compiled from laboratory studies conducted at Azad University at Science and Research Branch, Tehran, Iran. A model with architecture 4-10-1 trained by back-propagation algorithm is found to be optimum. A multiple variable regression (MVR) analysis is also applied to compare performance of the neural network. The results demonstrate that predictive capability of the ANN model is better than that of the MVR model. It is concluded that roadheader performance could be accurately predicted as a function of unconfined compressive strength, Brazilian tensile strength, rock quality designation, and alpha angle R ² = 0.987. Sensitivity analysis reveals that the most effective parameter on roadheader performance is the unconfined compressive strength.     

TVD-MRDL: traffic violation detection system using MapReduce-based deep learning for large-scale data

Maintaining a fluid and safe traffic is a major challenge for human societies because of its social and economic impacts. Various technologies have considerably paved the way for the elimination of traffic problems and have been able to effectively detect drivers’ violations. However, the high volume of the real-time data collected from surveillance cameras and traffic sensors along with the data obtained from individuals have made the use of traditional methods ineffective. Therefore, using Hadoop for processing large-scale structured and unstructured data as well as multimedia data can be of great help. In this paper, the TVD-MRDL system based on the MapReduce techniques and deep learning was employed to discover effective solutions. The Distributed Deep Learning System was implemented to analyze traffic big data and to detect driver violations in Hadoop. The results indicated that more accurate monitoring automatically creates the power of deterrence and behavior change in drivers and it prevents drivers from committing unusual behaviors in society. So, if the offending driver is identified quickly after committing the violation and is punished with the appropriate punishment and dealt with decisively and without negligence, we will surely see a decrease in violations at the community level. Also, the efficiency of the TVD-MRDL performance increased by more than 75% as the number of data nodes increased.

     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Pervaporative removal of acrylonitrile from aqueous streams through polydimethylsiloxane membrane

This study describes the successful separation of acrylonitrile (ACN) from dilute aqueous streams using pervaporation process. The influences of ACN feed concentration, permeate pressure, operating temperature, feed flow rate and membrane thickness on the membrane separation performance were investigated. The results showed that with an increase in ACN concentration in the feed solution, the permeation flux of ACN increased while the enrichment factor decreased. It was also indicated that increasing the permeate pressure reduced the driving force for mass transfer and consequently the permeation flux dropped while the enrichment factor enhanced. Polydimethylsiloxane membranes used in this study showed very good properties in the separation process, leading to enrichment factors in the range of 70-140. Furthermore, the activation energy for pervaporation of both ACN and water calculated from Arrhenius plot indicated that the permeation of water through the membrane was more temperature dependant than ACN.     

NUMERICAL SIMULATION OF FLOW OVER TWO CIRCULAR CYLINDERS IN TANDEM ARRANGEMENT

In this article,the 2-D unsteady viscous flow around two circular cylinders in a tandem arrangement is numerically simulated in order to study the characteristics of the flow in both laminar and turbulent regimes.The method applied alternatively is based on the finite volume method on a Cartesian-staggered grid.The great source term technique is employed to identify the cylinders placed in the flow field.To apply the boundary conditions,the ghost-cell technique is used.The implemented computational method is firstly validated through simulation of laminar and turbulent flows around a fixed circular cylinder.Finally,the flow around two circular cylinders in a tandem arrangement is simulated and analyzed.The flow visualization parameters,the Strouhal numbers,and drag and lift coefficients are comprehensively presented and compared for different cases in order to reveal the effect of the Reynolds number and gap spacing on the behavior of the flow.The obtained results have shown two completely distinct flow characteristics in laminar and turbulent regimes.     

Predictive model for shear strength estimation in reinforced concrete beams with recycled aggregates using Gaussian process regression

Neural Computing and Applications - In order to attain sustainable development, recycled concrete aggregates (RCAs) are increasingly utilized in civil engineering projects. Therefore, it is vital...     

A Model for Identifying the Behavior of Alzheimer’s Disease Patients in Smart Homes

Wireless Personal Communications - In recent years, Smart Cities and Smart Homes have been studied as an important field of research. The design and construction of smart homes have flourished so...     

F-LEACH: a fuzzy-based data aggregation scheme for healthcare IoT systems

The Journal of Supercomputing - Internet of Things (IoT) is an emerging paradigm that consists of numerous connected and interrelated devices with embedded sensors, exchanging data with each other...     

ARO: A new model free optimization algorithm for real time applications inspired by the asexual reproduction

This paper presents a new individual based optimization algorithm, which is inspired from asexual reproduction known as a remarkable biological phenomenon, called as asexual reproduction optimization (ARO). ARO can be essentially considered as an evolutionary based algorithm that mathematically models the budding mechanism of asexual reproduction. In ARO, a parent produces a bud through a reproduction operator; thereafter the parent and its bud compete to survive according to a performance index obtained from the underlying objective function of the optimization problem; this leads to the fitter individual. ARO adaptive search ability along with its strength and weakness points are fully described in the paper. Furthermore, the ARO convergence to the global optimum is mathematically analyzed. To approve the effectiveness of the ARO performance, it is tested with several benchmark functions frequently used in the area of optimization. Finally, the ARO performance is statistically compared with that of an improved genetic algorithm (GA). Results of simulation illustrate that ARO remarkably outperforms GA.