SiGe VCOs operating up to 88 GHz, suitable for automotive radar sensors

VCOs fully integrated in an SiGe preproduction technology are presented. By cutting interconnection lines a wide frequency range can be covered, up to 88.4 GHz. Special effort has been made to meet the demands for 77 GHz automotive radar. In the corresponding tuning range from 75.3 to 79.6 GHz, an output power of about 11 dBm (with -2.2 dBm potential measurement uncertainty) was achieved for each of the two complementary outputs, i.e. in total 14 dBm. The phase noise is about -94 dBc/Hz at 1 MHz offset frequency.     

西藏南部地区人工爆炸地震探测的地壳结构

众所周如,西藏地区是研究地球深部结构和构造的窗口,是研究大陆板块学说的重要场所,也是寻找热源和其它矿产资源的有利地区.因此,世界各国地学科学家都希望在本地区进行科学研究工作,或与我国科学工作者协作共同探索这一重要地区.中国和法国的地质、地球物理科学家经商讨共同组成“中法喜马拉雅山地质研究队”,对西藏中部广大地区进行地质、地球物理的科学研究工作.深部地震探测是地球物理研究中的重要内容.中法双方共同决定,在中国西藏南部的日喀则地区至北边的那曲地区作地震探测工作.为了探测地壳上地幔的结构,1981年在西藏的南部佩枯错至普莫雍错500公里的喜马拉雅山北麓——雅鲁藏布江地区进行了人工爆炸地震探测工作.本文是中法地质研究队合作的深部地震探测资料的解释结果.     

Inhibiting and deactivating effects of water on the selective catalytic reduction of nitric oxide with ammonia over MnOx/Al2O3

The effect of water on the selective catalytic reduction (SCR) of nitric oxide with ammonia over alumina supported with 2–15 wt.-% manganese oxide was investigated in the temperature range 385–600 K, with the emphasis on the low side of this temperature window. Studies on the effect of 1–5 vol.-% water vapour on the SCR reaction rate and selectivity were combined with TPD experiments to reveal the influence of water on the adsorption of the single SCR reactants. It turned out that the activity decrease due to water addition can be divided into a reversible inhibition and an irreversible deactivation. Inhibition is caused by molecular adsorption of water. TPD studies showed that water can adsorb competitively with both ammonia and nitric oxide. Additional kinetic experiments revealed that adsorbed ammonia is present in excess on the catalyst surface, even in the presence of water. Reduced nitric oxide adsorption is responsible for the observed reversible decrease in the reaction rate; the fractional reaction order changes from 0.79 in the absence of water to 1.07 in its presence. Deactivation is probably due to the dissociative adsorption of water, resulting in the formation of additional surface hydroxyls. As the amount of surface hydroxyls formed is limited to a saturation level, the deactivating effect on the catalyst is limited too. The additional hydroxyls condense and desorb in the temperature range 525–775 K, resulting in a lower degree of deactivation at higher temperature. A high temperature treatment at 775 K results in a complete regeneration. The amount of surface hydroxyls formed per unit surface area decreases at increasing MnO_x-loading. The selectivity to the production of nitrogen is enhanced significantly by the presence of gas phase water.     

Monolithic integration of a 5.3 GHz regenerative frequency divider using a standard bipolar technology

A monolithic microwave frequency divider IC with an operating range of 1.4?5.3 GHz was developed and fabricated in a standard bipolar technology. The circuit operates on the principle of `regenerative frequency division?. Compared to the most popular divider concepts based on a master-slave D-flip-flop, an almost twice as high input frequency can be divided, provided that the same technology is used. A further advantage is the low power consumption.     

Locked discrete event systems: How to model and how to unlock

To model qualitative aspects of discrete event systems, i.e., the order of the events is of sole importance, we use a triple consisting of the set of all possible events (the alphabet), the set of all behavior (possible strings of events), and the set of all tasks (completed behavior). We use this view to model synchronous as well as asynchronous connection of systems. Moreover, it is easy to define notions like deadlock and livelock in this view. We give a method to construct a second system that, in connection with the original system, gets rid of its deadlock and/or livelock. A state-space representation is introduced. In this representation computations can be done effectively.     

Application of differential quadrature to static analysis of structural components

The numerical technique of differential quadrature for the solution of linear and non-linear partial differential equations, first introduced by Bellman and his associates, is applied to the equations governing the deflection and buckling behaviour of one- and two-dimensional structural components. Separate transformations are used for higher-order derivatives, as suggested by Mingle, thus extending the method to treat fourth-order equations and to include multiple, boundary conditions in the respective co-ordinate directions. Results are obtained for various boundary and loading conditions and are compared with existing exact and numerical solutions by other methods. The application of differential quadrature to this class of problems is seen to lead to accurate results with relatively small computational effort.     

Editorial

Ohne Zusammenfassung     

13 Gb/s Si-bipolar AGC amplifier IC with high gain and wide dynamicrange for optical-fiber receivers

A complete linear automatic-gain-control (AGC) amplifier for a 10 Gb/s optical-fiber link was integrated on a single chip, using a Si-bipolar production technology with f_T≈22 GHz. It is characterized by a high gain of 37 dB, linear operation over a wide input dynamic range of 47 dB, a maximum data rate of 13 Gb/s, and a gain-independent 3-dB cut off frequency of 10 GHz. The circuit consumes 850 mW at a single supply voltage of -6.5 V. It can be operated in both a single-ended and differential mode. A novel 50-Ω input matching circuit with only small return loss is used. Two separate output buffers with a constant output voltage swing of 500 mV_p-p allow splitting up the output signal without use of external components