Assessment of neutron dosemeters around standard sources and nuclear fissile objects

In order to evaluate the neutron doses around nuclear fissile objects, a comparative study has been made on several neutron dosemeters: bubble dosemeters, etched-track detectors (CR-39) and 3He-filled proportional counters used as dose-rate meters. The measurements were made on the ambient and the personal dose equivalents H*(10) and Hp(10). Results showed that several bubble dosemeters should have been used due to a low reproducibility in the measurements. A strong correlation with the neutron energy was also found, with about a 30% underestimation of Hp(10) for neutrons from the PuBe source, and about a 9% overestimation for neutrons from the 252Cf source. Measurements of the nuclear fissile objects were made using the CR-39 and the dose-rate meters. The CR-39 led to an underestimation of 30% with respect to the neutron dose-rate meter measurements. In addition, the MCNP calculation code was used in the different configurations.     

APOB CRISPR-Cas9 Engineering in Hypobetalipoproteinemia: A Promising Tool for Functional Studies of Novel Variants

Hypobetalipoproteinemia is characterized by LDL-cholesterol and apolipoprotein B (apoB) plasma levels below the fifth percentile for age and sex. Familial hypobetalipoproteinemia (FHBL) is mostly caused by premature termination codons in the APOB gene, a condition associated with fatty liver and steatohepatitis. Nevertheless, many families with a FHBL phenotype carry APOB missense variants of uncertain significance (VUS). We here aimed to develop a proof-of-principle experiment to assess the pathogenicity of VUS using the genome editing of human liver cells. We identified a novel heterozygous APOB-VUS (p.Leu351Arg), in a FHBL family. We generated APOB knock-out (KO) and APOB-p.Leu351Arg knock-in Huh7 cells using CRISPR-Cas9 technology and studied the APOB expression, synthesis and secretion by digital droplet PCR and ELISA quantification. The APOB expression was decreased by 70% in the heterozygous APOB-KO cells and almost abolished in the homozygous-KO cells, with a consistent decrease in apoB production and secretion. The APOB-p.Leu351Arg homozygous cells presented with a 40% decreased APOB expression and undetectable apoB levels in cellular extracts and supernatant. Thus, the p.Leu351Arg affected the apoB secretion, which led us to classify this new variant as likely pathogenic and to set up a hepatic follow-up in this family. Therefore, the functional assessment of APOB-missense variants, using gene-editing technologies, will lead to improvements in the molecular diagnosis of FHBL and the personalized follow-up of these patients.     

Mechanical modeling of macroscopic behavior for anisotropic and heterogeneous metal alloys

The present investigative work was focused on modeling the effect of through-thickness texture gradients on the global mechanical behavior of a rolled ferritic stainless steel sheet. The material was experimentally characterized according to the needs of the analysis. First, a homogeneous rolled sheet was analytically described, based on Hill’s formalism of generalized materials. Then, a heterogeneous sheet was analyzed through two analytic approaches. The predictive capability of the resulting approaches was also proven in relation to the choice of the pseudo-anisotropic coefficients selected from fictitious materials. Finally, the application of a simple method, called continuum mechanics of textured polycrystals, taking into account crystallographic considerations, was adopted. As a result, this method was found to be an effective way to model the mechanical behavior of an anisotropic and heterogeneous sheet, replicating the evolution of experimental yield stress and plastic strain ratio either in terms of evolution or in those of level values. An attempt to estimate the impact of low-texture gradients on the heterogeneity of any industrial metal sheet is also made.     

Application of ultrafiltration to the preparation of defined hydrolysates of bovine haemoglobin

Many uses of protein hydrolysates have been developed and applied to areas such as nutritional therapy, culture media, and the isolation of biologically active peptides. All these applications need carefully controlled and characterized hydrolysates. In order to produce such a type of hydrolysate, it is possible to use haemoglobin which is a very well defined and constant protein source. Enzymic hydrolysis of haemoglobin by pepsin was carried out at pilot-plant scale in an ultrafiltration reactor with mineral membranes. The object was to obtain a reproducible, decolorized, salt-free enzymic hydrolysate. Two types of membranes were tested having 10000 dalton (M5 type) and 20000 dalton (M4 type) cut-offs. Little significant difference was observed in the final products when both types of membranes were used. Reproducibility of hydrolysates was verified by amino acid analysis and gel filtration chromatography. The haemoglobin hydrolysates produced contained more than 90% protein and are especially suitable for fine applications.     

Experimental investigation in the TOSQAN facility of heat and mass transfers in a spray for containment application

TOSQAN is an experimental program undertaken by the Institut de Radioprotection et de Sûreté Nucléaire (IRSN) in order to perform thermal hydraulic containment studies. The TOSQAN facility is a large enclosure devoted to simulate typical accidental thermal hydraulic flow conditions in nuclear-pressurized water reactor (PWR) containment. The TOSQAN facility which is highly instrumented with non-intrusive optical diagnostics is particularly adapted to nuclear safety CFD code validation. The present work is devoted to studying the interaction of a water spray injection used as a mitigation means in order to reduce the gas pressure and temperature in the containment, to produce gases mixing and washout of fission products. In order to have a better understanding of heat and mass transfers between spray droplets and the gas mixture, and to analyze mixing effects due to spray activation, we perform detailed characterization of the two-phase flow.     

Poly(butylene succinate‐co‐butylene adipate)/polyethylene oxide blends for controlled release materials: A morphological study

Varying the formulation and processing conditions of polymer blends allows the design of materials with a large range of morphologies. Active materials embedding active compounds in a devoted phase are promising applications of such blends, offering possible various transport properties. In this study, 13 poly(butylene succinate‐co‐butylene adipate) (PBSA)/polyethylene oxide (PEO) blends were extruded in a slit die. Their morphologies were characterized by water extraction (selective PEO dissolution), FTIR spectroscopy, and differential scanning calorimetry. Transport properties were assessed by water vapor permeation and fluorescein release as model migrant. Indeed, the desorption in water of fluorescein (previously entrapped in PEO) was monitored to preliminary investigate the release properties of these materials: two morphologies were obtained (i) pseudo multilayer films made of PEO‐rich layer/PBSA‐rich layer/PEO‐rich layer and (ii) PEO nodules dispersed in the PBSA‐rich matrix for the highest PBSA contents. The first systems were erodible ones with an uncontrolled fast delivery by PEO dissolution whereas the second ones showed a controlled release by permeation through the PBSA matrix from PEO nodules. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42874.     

DEHYDRATION BY DESORPTION AND BY SPRAY DRYING OF DAIRY PROTEINS: INFLUENCE OF THE MINERAL ENVIRONMENT

A drying method by desorption in a water activity meter was used to simulate the conditions of spray drying and to determine the water transfer inside dairy concentrates towards the surface and from the surface to the drying air. The concentrates were also spray dried and solubility index of powders were determined during reconstitution. Whey protein concentrates (WPC) and native phosphocaseinate suspensions (NPCS) were used to study the effect of NaCl (420 mM), CaCl₂ (222 raM), sodium phosphate (173 mM) and sodium citrate (238 mM) on the water transfers. The decrease in water transfer during drying was explained by the high hygroscopicity of added mineral salts to WPC. NaCl addition to NPCS decreased the water transfer during drying, but increased the solubility index. Citrate and phosphate addition to NPCS increased the water transfer during drying and reconstitution. CaCl₂ increased the water transfer during drying but the solubility index was always low. Results are discussed as a function of the aqueous environment, of the nature of mineral salts, of the structure of dairy proteins and of protein solvation.