Cold Atmospheric Plasma Apoptotic and Oxidative Effects on MCF7 and HCC1806 Human Breast Cancer Cells

Breast cancer (BC) is a malignant neoplasia with the highest incidence and mortality rates in women worldwide. Currently, therapies include surgery, radiotherapy, and chemotherapy, including targeted therapies in some cases. However, treatments are often associated with serious adverse effects. Looking for new options in BC treatment, we evaluated the therapeutic potential of cold atmospheric plasma (CAP) in two cell lines (MCF7 and HCC1806) with distinct histological features. Apoptosis seemed to be the most prevalent type of death, as corroborated by several biochemical features, including phosphatidylserine exposure, the disruption of mitochondrial membrane potential, an increase in BAX/BCL2 ratio and procaspase 3 loss. Moreover, the accumulation of cells in the G2/M phase of the cell cycle points to the loss of replication ability and decreased survival. Despite reported toxic concentrations of peroxides in culture media exposed to plasma, intracellular peroxide concentration was overall decreased accompanying a reduction in GSH levels shortly after plasma exposure in both cell lines. In HCC1806, elevated nitric oxide (NO) concentration accompanied by reduced superoxide levels suggests that these cells are capable of converting plasma-derived nitrites into NO that competes with superoxide dismutase (SOD) for superoxide to form peroxinitrite. The concomitant inhibition of the antioxidative activity of cells during CAP treatment, particularly the inhibition of cytochrome c oxidase with sodium azide, synergistically increased plasma toxicity. Thus, this in vitro research enlightens the therapeutic potential of CAP in the treatment of breast cancer, elucidating its possible mechanisms of action.     

BASIC ECONOMIC OPTIMIZATION MODEL FOR A CONTINUOUS EXTRACTION PROCESS*

A basic mathematical model, mainly focused on economic assessment is directly applied to a counter-current, stage-wise, solvent-selective extraction system. A standard extraction model, based on the modeling of a mixer-settler process, is used as point of departure. This system is used to extract a dissolved compound in a process stream. Thereafter sensible operating and economic parameters are integrated into it. An adequate handling of these parameters allows a practical preliminary optimization process modeling. The economic assessment model can be applied from one to "ri" stages in any industrial stage-wise process unit. An optimum number of stages are determined based on solvent extraction and economic assessment.     

From coffee industry waste materials to skin‐friendly products with improved skin fat levels

Spent coffee grounds (SCG), which are the residue obtained from the treatment of coffee with hot water or steam, can be used for industrial applications, due to the high content in lipids. The cosmetic products might be a suitable application for these types of residues because the barrier properties of the stratum corneum (SC) are largely dependent on the intactness of the lipid lamellae that surrounds the corneocytes. The purpose of this work was to assess the feasibility of using the lipid fraction of SCG extracted with supercritical carbon dioxide in the development of new cosmetic formulations with improved skin lipids (sebum) and hydration. The use of spent coffee lipid extract in cosmetic industry seems to be a suitable approach to recycle the wastes from coffee industry. Emulsion containing 10% of the lipid fraction of SCG (SpentCofOil cream) presented promising characteristics in the improvement of sebum skin levels with a good acceptance by consumers when compared to an emulsion containing 10% w/w of green coffee oil (GreenCofOil cream) and a placebo without coffee oil (NoCofOil cream). Practical applications: In this work, the authors develop and characterize a cream containing 10% of the lipid fraction of SCG extracted with supercritical carbon dioxide with improved skin lipids (sebum) and hydration.     

Nanoflow low pressure high peak capacity single dimension LC-MS/MS platform for high-throughput, in-depth analysis of mammalian proteomes

The use of narrow bore LC capillaries operated at ultralow flow rates coupled with mass spectrometry provides a desirable convergence of figures of merit to support high-performance LC-MS/MS analysis. This configuration provides a viable means to achieve in-depth protein sequence coverage while maintaining a high rate of data production. Here we explore potential performance improvements afforded by use of 25 μm × 100 cm columns fabricated with 5 μm diameter reversed phase particles and integrated electrospray emitter tips. These columns achieve a separation peak capacity of ≈750 in a 600-min gradient, with average chromatographic peak widths of less than 1 min. At room temperature, a pressure drop of only ≈1500 psi is sufficient to maintain an effluent flow rate of ≤10 nL/min. Using mouse embryonic stem cells as a model for complex mammalian proteomes, we reproducibly identify over 4000 proteins across duplicate 600 min LC-MS/MS analyses.     

Niobium(V) oxide (Nb2O5): application to phosphoproteomics

Proteomics-based analysis of signaling cascades relies on a growing suite of affinity resins and methods aimed at efficient enrichment of phosphorylated peptides from complex biological mixtures. Given the heterogeneity of phosphopeptides and the overlap in chemical properties between phospho- and unmodified peptides, it is likely that the use of multiple resins will provide the best combination of specificity, yield, and coverage for large-scale proteomics studies. Recently titanium and zirconium dioxides have been used successfully for enrichment of phosphopeptides. Here we report the first demonstration that niobium pentoxide (Nb 2O 5) provides for efficient enrichment and recovery ( approximately 50-100%) of phosphopeptides from simple mixtures and facilitates identification of several hundred putative sites of phosphorylation from cell lysate. Comparison of phosphorylated peptides identified from Nb 2O 5 and TiO 2 with sequences in the PhosphoELM database suggests a useful degree of divergence in the selectivity of these metal oxide resins. Collectively our data indicate that Nb 2O 5 provides efficient enrichment for phosphopeptides and offers a complementary approach for large-scale phosphoproteomics studies.     

Effect of Cavity Disinfectants on Adhesion to Primary Teeth—A Systematic Review

Some authors have been proposing the use of cavity disinfectants in order to reduce, or even eliminate, the effect of the microorganisms present in a dental cavity before a restoration is placed. The aim of this study was to evaluate the effect of different cavity disinfectants on bond strength and clinical success of composite and glass ionomer restorations on primary teeth. The research was conducted using Cochrane Library, PubMed/MEDLINE, SCOPUS, and Web of Science for articles published up to February 2021. The search was performed according to the PICO strategy. The evaluation of the methodological quality of each in vitro study was assessed using the CONSORT checklist for reporting in vitro studies on dental materials. Sixteen in vitro studies and one in situ study fulfilled the inclusion criteria and were analyzed. Chlorhexidine was the most studied cavity disinfectant, and its use does not compromise dentin bonding. Sodium hypochlorite is a promising alternative, but more research on its use is required to clearly state that it can safely be used as a cavity disinfectant for primary teeth. Although other disinfectants were studied, there is a low-level evidence attesting their effects on adhesion, therefore their use should be avoided.     

An external source 7 T Fourier transform ion cyclotron resonance mass spectrometer with electrostatic ion guide

An external source 7 T Fourier transform ion cyclotron resonance (FTICR) mass spectrometer offers three main novel features. First, a 9-way ion-source cross allows for mounting of up to three ionization sources simultaneously, thereby minimizing 'downtime' for changing ion sources. Second, an electrostatic (wire-in-cylinder) ion guide transports the ions approximately 1.5 m from the ion source to the ion trap for mass analysis, through a large magnetic field gradient. Third, the system operates from a modular data system described elsewhere in this issue. Luteinizing hormone-releasing hormone (LH-RH) matrix-assisted laser desorption/ionization (MALDI) FTICR positive-ion mass spectra exhibit signal-to-noise ratio greater than 1000:1 and mass resolving power, m/delta m 50% > 100,000. Laser-induced fragmentation of bradykinin demonstrates the ability of the ion guide to transmit both molecular and fragment ions simultaneously. Ultra-high resolution (average resolving power approximately 400,000) was achieved for poly(ethylene glycol) of specified number-average molecular weight, Mn approximately 3400. Future installation of an electrospray source to the ion-source cross should allow for better characterization of the performance of the ion guide.     

Development and characterization of new and scalable topical formulations containing N-acetyl-d-glucosamine-loaded solid lipid nanoparticles

N-Acetyl-d-glucosamine (NAG) has been recently considered for topical treatment of hyperpigmentation disorders due to its inhibitory effect on thyrosinase enzymes in melanocytes. NAG is a precursor of hyaluronic acid, increasing its amount in skin, and consequently, preserving the skin hydration and elasticity. It may also act as an emulsion stabilizer.

Solid lipid nanoparticles (SLN) are advanced delivery systems successfully used in pharmaceutical and cosmetic formulations for the improvement of active molecules penetration into the skin. Therefore, this work aimed to develop and characterize stable and scalable topical formulations containing NAG-loaded SLN.

NAG was incorporated in SLN which were prepared by two high shear homogenizers and characterized regarding its morphology and particle size by transmission electron microscopy and photon correlation spectroscopy, respectively. Oil emulgel and hydrogel were used as carriers of NAG-loaded SLN. Several parameters were evaluated, including the droplet size distribution, rheology, pH and topical delivery by different techniques.

It was observed that SLN size was significantly dependent on NAG incorporation and homogenization process. Most tested SLN parameters appeared to be quite suitable, that is, spherical and well-defined SLN with approximately 258?nm and ?30?mV. Hereafter, both gels containing SLN presented a pseudoplastic flow. Emulgel formulation containing NAG-loaded SLN allowed a higher NAG permeation through the SC compared to the respective control (about 0.8 μgcm^?2?h^?1).

According to the results obtained, it can be suggested that NAG acts as an emulsion stabilizer. This stabilization was also particularly dependent on the homogenizer type which is quite important for scale-up process. This study demonstrated the potential of scalable SLN formulations to improve NAG topical delivery contributing to the improvement of skin properties on several skin disorders.     

Additive manufacturing tooling for the automotive industry

Micro injection moulding is a mass production of micro optics that offers the possibility of a high functional integration within a single micro part by insert moulding. Since the functionality of the micro parts depends on the homogeneity of the overmoulded polymer layer, a robust, accurate and fast metrology system is needed for a quantitative quality assessment. Here, we demonstrate an in-line metrology approach for the optical inspection of insert molded micro parts. In contrast to standard interferometers, the proposed system has low demands regarding the coherence of illumination. Thus, an LED light source can be used instead of a laser, reducing the cost and increasing the safety of the production platform. In addition, the system is robust against mechanical distortions, since it is based on a common path approach. These advantages make the system a good candidate that fulfills the needs in regard to the in-line inspection of insert molded micro parts. As an example of application, the proposed system is used to inspect a cannula with overmolded thermoplastic as a light sleeve providing illumination over a specific area of surgery.