Flower‐shaped ultra‐wideband fractal antenna

A flower‐shaped ultra‐wideband fractal antenna is presented. It comprises a fourth iterative flower‐shaped radiator, asymmetrical stub‐loaded feeding line, and coplanar quarter elliptical ground planes. A wide operating band of 12.12 GHz (4.58‐16.7 GHz) for S ₁₁ ≤ ? 10 dB is achieved along with an overall antenna footprint of 15.7 × 11.4 mm². In addition, other desirable characteristics, that is, omnidirectional radiation patterns, peak gain upto 5 dB, and fidelity factor more than 75% are achieved. A good agreement exists between the simulation and measured results. The obtained results illustrate that this antenna has wide operating range and compact dimensions than available structures.     

Mathematical model for computer simulation and control of steelmaking

A dynamic model for computer simulation and control of steelmaking has been developed. It is essentially based on multicomponent mixed transport control theory with the incorporation of energy balance calculations. The model is applicable to both steelmaking in electric furnaces as well as in oxygen steelmaking converters. The adjustable parameters of the model for simulation of oxygen steelmaking are gas evolution rate (G_co). oxygen flux factor (F_o) and emulsification factor (EM). These simulation parameters, when combined with on-line measurement of off-gas composition and temperature, enable complete dynamic control of the process. The model developed is applied, as an example, to an industrially produced heat in a top blown oxygen steelmaking converter and the results of simulation are discussed.     

Non-pinched, minimum energy distillation designs

Non-pinched, minimum energy solutions are important class of distillation designs that offer the potential advantage of a better trade-off between capital investment and operating costs. In this paper, two important tasks associated with non-pinched distillation designs are studied. Thus the novel contributions of this work to the literature are

(1) A comprehensive methodology for finding non-pinched minimum energy designs.

(2) Understanding of the reasons for the existence of non-pinched distillation designs.

It is shown that the recent shortest stripping line distance approach of Lucia et al. [Lucia, A., Amale, A. and Taylor, R., 2007, Distillation pinch points and more. Comput Chem Eng, available on-line] is capable of systematically and reliably finding non-pinched, minimum energy distillation designs. In addition, we provide an understanding of the reasons behind the existence of non-pinched designs, which include trajectories that follow unstable branches of a pinch point curve in azeotropic systems, the inherent looping structure of trajectories in hydrocarbon separations, and the presence of ancillary constraints in multi-unit processes like extraction/distillation. Several distillation examples are studied and many numerical results and geometric illustrations are presented that show the shortest stripping line distance methodology is indeed a powerful and systematic tool for computing non-pinched, minimum energy designs and that support the underlying reason we provide for the existence of non-pinched designs.     

Seeking the truth about ad hoc join costs

In this paper, we re-examine the results of prior work on methods for computing ad hoc joins. We develop a detailed cost model for predicting join algorithm performance, and we use the model to develop cost formulas for the major ad hoc join methods found in the relational database literature. We show that various pieces of “common wisdom” about join algorithm performance fail to hold up when analyzed carefully, and we use our detailed cost model to derive op timal buffer allocation schemes for each of the join methods examined here. We show that optimizing their buffer allocations can lead to large performance improvements, e.g., as much as a 400% improvement in some cases. We also validate our cost model's predictions by measuring an actual implementation of each join algorithm considered. The results of this work should be directly useful to implementors of relational query optimizers and query processing systems. Edited by M. Adiba. Received May 1993 / Accepted April 1996     

Visual insights into high-resolution earthquake Simulations.

This study focuses on the visualization of a series of large earthquake simulations collectively called TeraShake. The simulation series aims to assess the impact of San Andreas Fault earthquake scenarios in Southern California. We discuss the role of visualization in gaining scientific insight and aiding unexpected discoveries.     

Superplasticity in a high strength powder aluminum

The superplastic properties of a rapidly solidified, high strength P/M Al alloy and the same alloy reinforced with SiC particulates (SiC _p ) have been studied. To prepare superplastic test materials, a matrix alloy powder of composition 7.2Zn-2.4Mg-2Cu-0.2Zr-0.12Cr-0.2Co (Kaiser PM-64) and the powder mixed with 10 to 20 vol pct SiC _p (~5 μm diameter) were thermomechanically processed to very fine equiaxed grain structures of ~6 μm and ~8 μm, respectively. Superplasticity in these materials was evaluated by characterizing (1) high temperature stability, (2) dynamic grain growth, (3) strain rate sensitivity, (4) flow stress behavior, (5) cavitation and cavitation control, and (6) total superplastic strain. It was observed that the PM-64 alloy could achieve a total elongation of over 800 pct, while the SiC_p reinforced alloy could attain an elongation greater than 500 pct before failure. Also, it was shown that with the use of hydrostatic pressure during superplastic flow, cavitation could be controlled. Observations were made of the effect SiC _p reinforcement particles had on the superplastic flow stress behavior. Interpretations are proposed to explain the role of particulates during superplastic straining.     

Routing of a hazmat truck in the presence of weather systems

This paper focuses on the effects of weather systems on hazmat routing. We start by analyzing the effects of a weather system on a vehicle traversing a single link. This helps characterize the time-dependent attributes of a link due to movement of the weather systems. This analysis is used as a building block for the problem of finding a least risk path for hazmat transportation on a network exposed to such weather systems. Several methods are offered to solve the underlying problem, and computational results are reported. We draw two conclusions from this paper. First, it is possible to determine the time-dependent attributes for links on a network provided that some assumptions on the nature of the weather system are made. Second, heuristics can provide effective solutions for practical size problems while allowing for parking the vehicle to avoid weather system effects.     

Component commonality effects on inventory costs

In this paper we study the effects of increasing component commonality for a single-period model. A two-product, two-level configuration under a general component cost structure is considered. The economic implications of replacing different products' components by common components are analyzed. We develop optimal solutions for the Commonality and Non-Commonality (Basic) Models and provide bounds on the total savings resulting from using commonality. We demonstrate, under general and specific component cost structures, that some forms of commonality may not always be a preferred strategy. Furthermore, we present conditions under which commonality should not be used. Finally, an extension to the two-product multicomponent model is provided.     

A two-stage MMSE multiuser decision feedback detector using successive/parallel interference cancellation

In this paper, we present a novel two-stage minimum-mean-squared-error (MMSE) multiuser decision feedback detector (DFD) for code division multiple access systems working in the frequency-selective multipath fading environment. The first stage of the proposed cascaded structure is the noise-predictive successive DFD (NP-S-DFD), in which the active users are detected successively using the conventional bell labs layered space-time (BLAST) ordering criterion. The second stage includes an adaptive successive/parallel DFD (SP-DFD), which uses the tentative decisions obtained at the first stage for multiuser interference cancellation and data detection. Therefore, the proposed two-stage DFD may be called noise-predictive successive SP-DFD (NP-S-SP-DFD). Simulation results are presented to demonstrate the substantial improvement in the bit error rate performance of NP-S-SP-DFD over the conventional single-stage and cascaded DFDs. It may be inferred that the proposed DFD provides additional performance gain, when the order in which the users are detected is optimized according to the BLAST ordering based on MMSE criterion.