Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Production Equations for Unsteady-State Construction Processes

The production equation called Little’s law has been applied to construction data recently. However, Little’s law was derived for steady-state conditions assuming constant input and output rates and long production runs. Production in construction is inherently temporary, and learning curves and environmental influences often render input and output rates unequal and nonlinear. Starting with a conservation of mass formulation, general equations for work-in-process and cycle time for unsteady-state conditions and limited run production are developed. The motivation behind these equations is to explain common trends in production variables seen on construction projects. Previous studies have shown that when output from a construction production system is drastically increased, a significant upward impact is also seen on cycle time and work-in-process, and this work provides underlying theory and equations to explain these trends. Cycle time and work-in-process equations are presented as functions of time and on average. Data from construction activities are used to show that unsteady-state conditions commonly occur. Reasonable simplifications of the general equations provide guidelines for buffer sizing and resource allocation decisions.     

Fuzzy Multiobjective and Linear Programming Based Management Models for Optimal Land-Water-Crop System Planning

In this article, linear programming and fuzzy optimization models are developed for planning and management of available land-water-crop system of Mahanadi-Kathajodi delta in eastern India. The models are used to optimize the economic return, production and labour utilization, and to search the related cropping patterns and intensities with specified land, water, fertilizer and labour availability, and water use pattern constraints. Due to extreme backwardness of the study area, it has been decided to keep all the three objectives of the linear programming models at the same priority level to obtain the compromised solution in a fuzzy environment that incorporates the imprecision in fuzzy goals and fuzzy constraints. These non-structural models facilitate the conjunctive use of available surface water and groundwater resources. A comparative evaluation along with the benefit-cost ratios of the existing and proposed farming systems is also presented.     

Effect of n-3 fatty acids on VLDL production by hepatocytes is mediated through prostaglandins

The mechanism of the hypolipidemic effect of n-3 fatty acids was studied using isolated rat hepatocytes maintained in culture. EPA and DHA caused a significant reduction in the incorporation of 3[H]-leucine into apoB associated with the VLDL produced by hepatocytes in culture when compared to that in presence of palmitic acid. Presence of indomethacin, an inhibitor of cyclo-oxygenase reversed the effect of EPA on VLDL synthesis while diethyl carbamazine an inhibitor of lipoxygenase did not show any effect suggesting that the effect of EPA may be mediated through prostaglandins. This was further tested by invivo experiments where animals were fed fish oil containing diet with and without aspirin, which inhibits formation of prostaglandins. The incorporation of 3[H]-leucine into apo B and 14[C]-acetate into cholesterol of VLDL produced by hepatocytes from aspirin treated animals were significantly high. The reversal of the effect of n-3 fatty acids by agents which inhibit the formation of prostaglandin suggests that the n-3 fatty acids may exert their effect on VLDL production by liver cells through prostaglandins.     

Age-related changes in innervation in hypertrophic pyloric stenosis

BACKGROUND/PURPOSE: Recent reports have identified abnormal innervation of the circular muscle layer involving the fine intramuscular nerve fibers in hypertrophic pyloric stenous (HPS). HPS presenting after 3 months of age is rare. The aim of this study was to determine the distribution pattern of nerve fibers in the smooth muscle layers in HPS and correlate this with age at presentation. METHODS: Full-thickness pyloric muscle biopsy specimens were obtained from eight patients with HPS (five age 3 to 5 weeks, two age 3 months, and one age 7 months) and five controls with normal pylorus (age 5 days to 3 years). All specimens were stained with monoclonal antibody to the neural cell adhesion molecule (NCAM) using immunohistochemistry. RESULTS: There were many NCAM-positive nerve fibers in the circular and longitudinal muscle layers in the controls. No NCAM positive nerve fibers were seen in the circular or longitudinal muscle layers in the five cases of HPS in which the patients were less than 5 weeks old. In the two cases in which the patients were 3 months old, occasional NCAM-positive nerve fibers were seen in the circular layer, and moderate numbers of NCAM positive fibers were seen in the longitudinal muscle layers. Moderate numbers of NCAM-positive nerve fibers in the circular muscle layer and many NCAM positive nerve fibers in the longitudinal muscle layers were identified in the 7-month-old HPS patient. CONCLUSIONS: The data suggest that the pyloric muscle lacks innervation in the young HPS infant. Whereas, at 3 months of age the hypertrophied pyloric muscle is partially innervated, and at 7 months of age the pyloric muscle has practically normal innervation.     

An inverse solution methodology for estimating the diffusion coefficient of gases in Athabasca bitumen from pressure-decay data

An inverse solution methodology is developed for the estimation of diffusion coefficient of gases in highly viscous, oil-sands bitumens from isothermal, pressure-decay measurements. The approach involves modeling the rate of change in pressure using the diffusion equation for the liquid phase coupled with a mass balance equation for the gas phase. The inverse solution framework is utilized to arrive at two graphical techniques for estimating the diffusion coefficient. Both techniques involve the determination of the slope of a straight line resulting from plotting the experimental data in accordance with the developed model. An advantage of the proposed techniques is that the diffusion coefficient is estimated directly, i.e. without making it an adjustable parameter. The novelty of the proposed method is in its simplicity as well as its ability to isolate portions of the pressure-decay data affected by experimental fluctuations. The effect of the initial pressure on the predicted diffusion coefficient and pressure-decay profile was also investigated. The diffusion coefficients of CO₂, CH₄, C₂H₆ and N₂ in Athabasca bitumen at 50–90 °C and about 8 MPa were estimated and compared with literature values.     

Powder Deposition in Three Parallel-Oriented Dies of Different Shapes

Uniformity of bulk density distribution during the die filling process is required to minimize quality problems, such as distortion and cracking, for powder compacts. Understanding the die filling process is necessary in ensuring a uniform powder deposition. The second-generation pressure deposition tester (PDT-II) was used to investigate the deposition process and final pressure distribution of powder filling in toroidal, cylindrical, and E-shaped dies. All tests were conducted using a spray-dried free-flowing granular powder. The results indicated that for toroidal dies: (1) the area around 0° orientation (the leeward end) had the highest pressure values (1186.7 to 2498.0 Pa), with the average pressure values of the remaining area 353.7-648.0 Pa; (2) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; (3) the highest feed shoe speed (500 mm/s) led to the most nonuniform pressure distribution among the three speeds; (4) higher feed shoe speed did not always result in higher final pressure values; and (5) the right die tended to have higher final pressure values (215.0 to 2498.0 Pa) than the center die (95.4 to 2052.5 Pa). For E-shaped dies: (1) the final pressure values of the middle leg (308.9 to 760.7 Pa) were higher than those of the left and the right legs (148.9 to 530.3 Pa); (2) the area along the backside had the highest final pressure value (1054.6 to 1303.8 Pa); (3) the pressure distribution was symmetrical about the centerline parallel to the feed shoe movement direction; and (4) neither the center die nor the right die always had higher pressure values than the other one at all locations. Comparison between cylindrical and toroidal dies indicated that: (1) neither of the two die shapes (cylinder and toroid) led to consistently higher or lower final pressure values at all locations and (2) for all three feed shoe speeds, the toroidal die had higher average final pressure values in the 0° orientation.