Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Moisture migration in idealized bilayer systems: relationships among water-associated properties, structure, and texture

The effects of composition and thermal treatment on the water sorption and diffusional properties of idealized protein gels arranged in bilayer configurations were determined; these water binding/migration properties were related to the mechanical characteristics of the gels. Samples were prepared from whey protein concentrate (WPC), they consisted of water:WPC ratios of 1.5 to 5.67, and were thermally set for 20–60 min. Moisture migration rates from samples interfaced with filters were determined, as were moisture sorption capacities of samples immersed in water. The physical properties of the gels were assessed by uniaxial compression and microscopy. Results showed that gel strength and consequent extent of protein interaction—as affected by thermal treatment—controlled the ability of the gel structure to absorb water. Sorption was exponentially correlated with gel modulus and linearly correlated with a function of protein content, heating time, and immersion time. Rates of diffusion from interfaced gels were dependent solely on water content. It was concluded that the degree of protein interaction, whether influenced by concentration or thermal treatment, affected network extensibility and thus the capacity of the gels to act as receptors of moisture. Results have implications for the functionality of shelf-stable sandwiches and other multicomponent foods.     

Phase characterization and mechanical and flame‐retarding properties of nano‐CaSO4/polypropylene and nano‐Ca3(PO4)2/polypropylene composites

An in situ deposition approach was used for the synthesis of nano‐CaSO₄ and nano‐Ca₃(PO₄)₂. The nanosize particles were confirmed with an X‐ray diffraction technique. Composites of polypropylene (PP) with 0.1–0.5 wt % nano‐ or commercial CaSO₄ or nano‐Ca₃(PO₄)₂ were prepared. The transition from the α phase to the β phase was observed for 0.1–0.3 wt % nano‐CaSO₄/PP and nano‐Ca₃(PO₄)₂/PP composites. This was confirmed by Fourier transform infrared. A differential scanning calorimetry analysis was carried out to determine the thermal behavior of the nanocomposites with increasing amounts of the nano‐CaSO₄ and nano‐Ca₃(PO₄)₂ fillers. Increases in the tensile strength and Young's modulus were observed up to certain loading and were followed by a decrease in the tensile strength. A continuous decrease in the elongation at break (%) was also observed for commercial CaSO₄ and larger nano‐Ca₃(PO₄)₂. A decrease in the mechanical properties after a certain loading might have been due to the agglomeration and phase transition of PP in the composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 670–680, 2007     

Testing the hypothesis of a block compound symmetric covariance matrix for elliptically contoured distributions

In this paper, the authors study the problem of testing the hypothesis of a block compound symmetry covariance matrix with two-level multivariate observations, taken for m variables over u sites or time points. Through the use of a suitable block-diagonalization of the hypothesis matrix, it is possible to obtain a decomposition of the main hypothesis into two sub-hypotheses. Using this decomposition, it is then possible to obtain the likelihood ratio test statistic as well as its exact moments in a much simpler way. The exact distribution of the likelihood ratio test statistic is then analyzed. Because this distribution is quite elaborate, yielding a non-manageable distribution function, a manageable but very precise near-exact distribution is developed. Numerical studies conducted to evaluate the closeness between this near-exact distribution and the exact distribution show the very good performance of this approximation even for very small sample sizes and the approach followed allows us to extend its validity to situations where the population distributions are elliptically contoured. A real-data example is presented and a simulation study is also conducted.     

The political economy of metering agricultural tube wells in West Bengal,India

Unmetered electricity supply to agriculture has given rise to a unique and invidious water–energy–food nexus in India. Metering of agricultural consumers has been suggested as a way to break the nexus, but most states have not been able to meter farmers due to their opposition . The only exception is the state of West Bengal. Using primary data from a household survey conducted in 2010 when the metering process was still underway, this paper argues that farmers’ support for metering in West Bengal can be explained in terms of the economics of groundwater use and politics surrounding agriculture and groundwater in the state.     

An adaptive Smith-controller for time-delay systems with relative degree n2

This paper addresses the control of time-delay systems whose relative degree does not exceed two. An adaptive Smith controller together with an adaptive law similar to the delay-free case is proposed. By using Lyapunov–Krasovskii functionals for an appropriate model transformation of the original system, semiglobal stability of the closed-loop system and asymptotic convergence of the output error is established. Strict positive realness together with the low relative degree of the plant is exploited to establish the stability properties. Robustness properties of the adaptive controller are briefly discussed.     

Cross-layer based congestion detection and routing protocol using fuzzy logic for MANET

Mobile Ad hoc Networks (MANET) is made up of mobile devices which form an infrastructure-less network. In MANET, the devices can change its location and configure itself at any time. Hence, there is a possibility for the network to be prone to abnormal network events due to certain factors like error in the links, overflow in the buffers, layers, and so forth. So, in this paper, a cross-layer based congestion detection and routing protocol is proposed using Fuzzy logic. In this protocol, whenever a network event occurs, the kind of event occurring is recognized in order to handle it accordingly. Next, the alternate routes for data transmission are determined by applying the concept of fuzzy logic on some of the critical factors. Based on the fuzzy inference rules, appropriate routes are selected and data messages are transmitted successfully.     

Atomistic Origin of the Enhanced Crystallization Speed and n‐Type Conductivity in Bi‐doped Ge‐Sb‐Te Phase‐Change Materials

Phase‐change alloys are the functional materials at the heart of an emerging digital‐storage technology. The GeTe‐Sb₂Te₃ pseudo‐binary systems, in particular the composition Ge₂Sb₂Te₅ (GST), are one of a handful of materials which meet the unique requirements of a stable amorphous phase, rapid amorphous‐to‐crystalline phase transition, and significant contrasts in optical and electrical properties between material states. The properties of GST can be optimized by doping with p‐block elements, of which Bi has interesting effects on the crystallization kinetics and electrical properties. A comprehensive simulational study of Bi‐doped GST is carried out, looking at trends in behavior and properties as a function of dopant concentration. The results reveal how Bi integrates into the host matrix, and provide insight into its enhancement of the crystallization speed. A straightforward explanation is proposed for the reversal of the charge‐carrier sign beyond a critical doping threshold. The effect of Bi on the optical properties of GST is also investigated. The microscopic insight from this study may assist in the future selection of dopants to optimize the phase‐change properties of GST, and also of other PCMs, and the general methods employed in this work should be applicable to the study of related materials, for example, doped chalcogenide glasses.     

Effect of composition on the matrix transformation of the Co-Re-Cr-Ta-C alloys

Neutron diffraction measurement was performed in-situ at high temperatures on Co-Re-Ta-C alloys with and without Cr addition. This included alloys containing different C content with the C/Ta ratio varying between 0.5 and 1.0. The Co-Re-solid solution matrix of the experimental alloys is polymorphic (like in pure cobalt) and transformed from low temperature hexagonal ? phase to high temperature cubic γ phase on heating. This transformation is reversible and show hysteresis. The main alloying addition, Re, stabilizes the ? Co-phase and increases the transformation temperature to above 1273 K. The onset of the \(\varepsilon \rightleftharpoons \gamma\) transformation during heating and cooling was found to differ depending on the alloy composition. In alloys without Cr addition the transformation was not completed on cooling and the high temperature γ phase was partly retained at room temperature in metastable state with the amount depending on the cooling rate from high temperature. The diffraction and microstructural results showed that Cr is ? stabilizer (similar as Re) but the role of Ta is not clear. The C/Ta ratio has no direct effect on the matrix phase transformation. Nevertheless, it influences indirectly by determining the amount of Ta which is freely available in the matrix.