Age of acquisition: Its neural and computational mechanisms.

The acquisition of new skills over a life span is a remarkable human ability. This ability, however, is constrained by age of acquisition (AoA); that is, the age at which learning occurs significantly affects the outcome. This is most clearly reflected in domains such as language, music, and athletics. This article provides a perspective on the neural and computational mechanisms underlying AoA in language acquisition. The authors show how AoA modulates both monolingual lexical processing and bilingual language acquisition. They consider the conditions under which syntactic processing and semantic processing may be differentially sensitive to AoA effects in second-language acquisition. The authors conclude that AoA effects are pervasive and that the neural and computational mechanisms underlying learning and sensorimotor integration provide a general account of these effects. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Characterization of CuInS2 thin films for solar cells prepared by spray pyrolysis

We have made a study of the chemical composition, the electrical, the optical and the structural properties of polycrystalline CuInS₂ thin films prepared by spray pyrolysis to be used for thin film solar cells. These films were deposited starting from aqueous solutions with different chemical compositions ([Cu]/[In] and [S]/[Cu] ratios) and at different substrate temperatures. In all cases, the material is p-type with grains preferentially oriented in the (112) direction of the sphalerite structure. The electro-optical properties show a very strong dependence on the [Cu]/[In] ratio in the solution. Films with copper excess have smaller resistivity and better crystallinity than those which are stoichiometric or have indium excess. The results obtained in this work show the possibility of having CuInS₂ thin films with a wide range of resistivity, a fact that could be important for making solar cells based on this material.     

Hyperinsulinaemia, dyslipaemia and cardiovascular risk in girls with a history of premature pubarche

Girls with a history of premature pubarche, i.e. appearance of pubic hair before 8 years of age, show hyperinsulinism in response to an oral glucose tolerance test. As hyperinsulinaemia has a major role in dyslipaemia, and is considered an independent risk factor for cardiovascular disease, we assessed the patterns of plasma insulin concentration after a standard oral glucose tolerance test as well as fasting serum lipid, lipoprotein, and sex hormone-binding globulin concentrations in girls (n = 81) with premature pubarche compared with girls (n = 55) matched with them for stage and bone age to ascertain their metabolic states to identify those potentially at risk for the development of premature cardiovascular disease. Mean serum insulin concentrations were higher in patients at all pubertal stages, and associated with elevated serum triglyceride, very low density cholesterol and very low density triglyceride concentrations (p value range 0.04 to < 0.0001) but reduced sex hormone-binding globulin. Premature pubarche patients also displayed higher low density to high density lipoprotein cholesterol ratios compared with control subjects (p = 0.004 to 0.008). In conclusion, hyperinsulinaemia, decreased sex hormone-binding globulin concentrations and an unfavourable lipid pattern are common features in premature pubarche girls supporting the contention that atherogenic abnormalities composing the metabolic syndrome could start in childhood. To determine the clinical sequelae of such clustering of metabolic deviations, girls who were identified need to be followed up for the potential development of premature cardiovascular disease.     

Energy Efficiency of an Indirect Thermally Coupled Distillation Sequence

Several thermally coupled distillation sequences have been proposed to improve the thermal inefficiency of conventional distillation sequences. Particularly, for the separation of ternary mixtures, structures that perform a lateral extraction in one of the columns of the integrated arrangement have been shown to provide significant energy savings. The structure of existing sequences, based on conventional distillation columns, might provide the basis for alternate thermally coupled designs. In this paper, it is shown how a thermally coupled system derived from an indirect conventional sequence can provide energy savings through a proper optimization of the interconnecting streams.     

Desulfurization of commercial fuels by π-complexation: Monolayer CuCl/γ-Al2O3

Monolayer CuCl/γ-Al₂O₃ sorbent was studied for desulfurization of a commercial jet fuel (364.3 ppmw S) and a commercial diesel (140 ppmw S). The sorbent was prepared by means of spontaneous monolayer dispersion methods. Deep desulfurization (sulfur levels of <1 ppmw) was accomplished with this sorbent using a fixed-bed adsorber. The CuCl/γ-Al₂O₃ sorbent was capable of removing 6.4 and 11.2 mg of sulfur per gram for jet fuel at breakthrough (at <1 ppmw S) and saturation, respectively. The same sorbent was capable of removing 0.94 and 1.8 mg of sulfur per gram for BP diesel at breakthrough and saturation, respectively. The difference in sulfur capacities for jet fuel and diesel was apparently caused by the difference in concentrations of strongly binding compounds, such as nitrogen heterocycles, heavy (polynuclear) aromatics and fuel additives. In comparison with CuCl/γ-Al₂O₃, Cu(I)Y zeolite has higher sulfur capacities but is less stable and can be easily oxidized to Cu(II)Y by fuel additives (such as oxygenates) and moisture and consequently loses π-complexation ability. However, all these cuprous π-complexation sorbents selectively adsorb thiophenic compounds over aromatics and olefins (as predicted by the high separation factors), which resulted in the observed desulfurization capability. A feasibility study is shown for efficient regeneration of CuCl/γ-Al₂O₃ using ultrasound at ambient temperature. Possible problems associated with desulfurization using π-complexation sorbents for commercial fuels are discussed.     

Barocalorimetric technique for monitoring pressurized copolymer reactors

The problem of on‐line estimation of the conversion and composition evolutions in a pressurized batch copolymer reactor with temperature and pressure measurements was addressed. The estimation model consisted of mass and energy balances with a pressure equation built from phase‐equilibrium considerations. The application of a nonlinear geometric estimation approach yielded the underlying solvability condition with physical meaning, a straightforward estimator construction, and a conventional‐like tuning procedure. The resulting barocalorimetric estimator was an on‐line dynamic measurement processor with a model‐based predictor and a measurement‐driven corrector, and whose implementation did not require the polymerization rates and heat‐transfer coefficient function dependencies. The technique was tested with a representative laboratory styrene–butadiene system. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 475–482, 2005     

Discovering social structures of local influence by using tweetStimuli

Information diffusion in large-scale networks has been studied to identify the users influence. The influence has been targeted as a key feature either to reach large populations or influencing public opinion. Through the use of micro-blogs, such as Twitter, global influencers have been identified and ranked based on message propagation (retweets). In this paper, a new application is presented, which allows to find first and classify then the local influence on Twitter: who have influenced you and who have been influenced by you. Until now, social structures of tweets’ original authors that have been either retweeted or marked as favourites are unobservable. Throughout this application, these structures can be discovered and they reveal the existence of communities formed by users of similar profile (that are connected among them) interrelated with other similar profile users’ communities.     

The hydrocarbon fraction of virgin olive oil and changes resulting from refining

In numerous Spanish virgin olive oils, 6,10-dimethyl-1-undecene, various sesquiterpenes, the series ofn-alkanes from C14 to C35, n-8-heptadecene and squalene are the only less volatile components detected by gas chromatography in the hydrocarbon fraction. In oils from olives of the Arbequine variety, a series ofn-9-alkenes has also been found. In refined oils, notable features are the absence of the most volatile compounds and the appearance of other hydrocarbons produced during the refining process. Among these,n-alkanes, alkadienes (mainlyn-hexacosadiene), stigmasta-3,5-diene, isomerization products of squalene, isoprenoidal polyolefins coming from hydroxy derivatives of squalene and steroidal hydrocarbons derived from 24-methylene cycloartanol were identified. Physical refining produces larger amounts of degradation products and greater losses ofn-alkanes than chemical processing. Squalene is the major hydrocarbon component in all oils, both virgin and refined. The ranges of concentration for the different hydrocarbons found in Spanish virgin olive oils are presented.     

预分解窑空气炮运用的节能效果

随着能源成本的增加,水泥行业不断寻求利用石油焦炭等替代燃料,但这些替代燃料的使用增加了物料在预热器、窑、冷却机中的阻塞和堆积。对物料的堵塞和堆积,常用的清除方法会带来许多弊端。利用空气炮防止物料的阻塞和堆积比较有效,可以从熟料质量、熟料产量、耐火材料寿命、能源、安全性等方面达到降低成本的目的。马丁公司在预热器和冷却器的改造方面与水泥行业有非常紧密的合作,墨西哥水泥厂是这种合作关系成功的典范。从1996年至今,墨西哥水泥厂已经安装了大约2900个马丁公司的BIG BLASTER空气炮,每年因为安装空气炮带来的收益达27万美元。基于此,UCC万吨熟料生产线也不例外地选用于马丁公司的空气炮。     

The role of lanthana loading on the catalytic properties of Pd/Al2O3-La2O3 in the NO reduction with H2

The role of La₂O₃ loading in Pd/Al₂O₃-La₂O₃ prepared by sol–gel on the catalytic properties in the NO reduction with H₂ was studied. The catalysts were characterized by N₂ physisorption, temperature-programmed reduction, differential thermal analysis, temperature-programmed oxidation and temperature-programmed desorption of NO.

The physicochemical properties of Pd catalysts as well as the catalytic activity and selectivity are modified by La₂O₃ inclusion. The selectivity depends on the NO/H₂ molar ratio (GHSV = 72,000 h⁻¹) and the extent of interaction between Pd and La₂O₃. At NO/H₂ = 0.5, the catalysts show high N₂ selectivity (60–75%) at temperatures lower than 250 °C. For NO/H₂ = 1, the N₂ selectivity is almost 100% mainly for high temperatures, and even in the presence of 10% H₂O vapor. The high N₂ selectivity indicates a high capability of the catalysts to dissociate NO upon adsorption. This property is attributed to the creation of new adsorption sites through the formation of a surface PdO_x phase interacting with La₂O₃. The formation of this phase is favored by the spreading of PdO promoted by La₂O₃. DTA shows that the phase transformation takes place at temperatures of 280–350 °C, while TPO indicates that this phase transformation is related to the oxidation process of PdO: in the case of Pd/Al₂O₃ the O₂ uptake is consistent with the oxidation of PdO to PdO₂, and when La₂O₃ is present the O₂ uptake exceeds that amount (1.5 times). La₂O₃ in Pd catalysts promotes also the oxidation of Pd and dissociative adsorption of NO mainly at low temperatures (<250 °C) favoring the formation of N₂.