Deep autoencoders for feature learning with embeddings for recommendations: a novel recommender system solution

Neural Computing and Applications - We propose “Deep Autoencoders for Feature Learning in Recommender Systems,” a novel discriminative model based on the incorporation of features from...     

Development of Low-Oxide MCrAlY Coatings for Gas Turbine Applications

Advanced high-energy plasma systems are being used to achieve the benefits of the high-velocity oxy-fuel (HVOF) system without losing the inherent advantages of plasma for coating of gas turbine parts. MCrAlY coatings play a very important role in the performance and reliability of gas turbine components. One of the important considerations for next generation of gas turbines, which have more demanding conditions and need to withstand ever increasing operating temperatures, is that they should possess very low oxygen content levels in the coating. Low oxygen content coatings are applied by the expensive low-pressure plasma spray (LPPS)/vacuum plasma spray (VPS) technique for critical components in aero- and land-based gas turbines. This work deals with the development of low-cost LPPS equivalent coatings (having low oxygen content) using the high-energy high-velocity plasma spray (HEHVPS) gun and inert gas shroud. A comparison has also been made with CoNiCrAlY coatings by HVOF.     

Performance of in-call buffer/window allocation schemes for short intermittent file transfers over broadband packet networks

While static open loop rate controls may be adequate for handling continuous bit rate (CBR) traffic, relatively smooth data traffic, and relatively low speed bursty data traffic over broadband integrated networks, high speed bursty data sources need more dynamic controls. Burst level resource allocation is one such dynamic control. Potential benefits and other issues for burst level resource parameter negotiations for bursty data traffic over high speed wide area packet networks have been discussed earlier.^1–6 A detailed analysis of an adaptive buffer/window negotiation scheme for long file transfers using these concepts is presented in Reference 1. In this paper we discuss two burst level buffer/window negotiation schemes for short intermittent file transfers, focusing on the specific needs of such traffic streams. We develop closed network of queues models to reflect the behaviour of the proposed schemes. These models, while being simple, capture essential details of the control schemes. Under fairly general assumptions, the resulting network of queues is of product form and can be analysed using the mean value analysis. We use such an analysis to compare the proposed schemes and to determine appropriate sizes of trunk buffers to achieve the desired balance between bandwidth utilization and file transfer delay. The effects of other parameters on the performance of these schemes as well as on the buffer sizing rules are also discussed. Burst level (in-call) parameter negotiation may be carried out by the end system with the network elements or by an interface system (access controller) with the broadband network elements. We discuss implications of this location as well as the needed protocol features. Finally, the service discrimination capabilities desired at the trunk controllers in switching nodes are briefly discussed.     

Mössbauer effect studies and X-ray diffraction analysis of cobalt ferrite prepared in powder form by thermal decomposition method

Cobalt ferrite (Co_xFe_3?xO₄) is prepared in powder form by thermal decomposition of iron and cobalt salts and is analysed by X-ray diffraction and Mössbauer spectroscopic techniques. The variation of Mössbauer parameters, lattice parameters and crystallite size of the products formed with variation in the composition of Fe and Co ratios are studied. The studies confirm the formation of nano-size cobalt ferrite particles with defect structure and it is found to be maximum for the Fe : Co = 60 : 40 ratio of the initial precursor oxides.     

Anionic Clays as Potential Slow-Release Fertilizers: Nitrate Ion Exchange

Several nitrate containing anionic clays were synthesized at different temperatures and the kinetics of NO₃ ^– release were determined to test their suitability as slow-release N fertilizers. A sample (Mg:Al = 2:1) synthesized at 60°C with smaller particle size released 75, 86 and 100% of its NO₃ ^– in 1, 3 and 7 days, respectively when equilibrated with a simulated soil solution. On the other hand, the 175°C/2 hrs sample with larger particle size released 65, 77 and 84% of its nitrate in 1, 3 and 7 days, respectively. Another anionic clay (synthesized at 175°C/24 hrs) of higher charge density (Mg:Al = 2:1) containing NO₃ ^– was equilibrated with a 0.012 N NaCl or Na₂CO₃ to test the role of different anions in releasing the NO₃ ^– anion from the interlayers. The results showed that Cl^– released more NO₃ ^– than did CO₃ ^2– from this anionic clay after all the treatment times probably as a result of the CO₃ ^2– anion blocking the release of NO₃ ^– from the interior of the crystals. When a lower charge density (Mg:Al = 3:1) sample (synthesized at 175°C/48 hrs) was equilibrated with 0.02N solution of anions the release of nitrate was as follows: Cl^– < F^– < SO₄ ⁼ CO₃ ^2–. These results suggest that the divalent SO₄ ⁼ and CO₃ ^2– anions are more effective in the release of NO₃ ^– from this lower charge density anionic clay. Time-resolved structural analysis of NO₃ ^– exchange with CO₃ ^2– in the above anionic clay using synchrotron x-ray diffraction showed that ion exchange is rapid because of small crystal size and lower charge density. Thus the release of NO₃ ^– from anionic clays is an interplay among the type of anions present in soil solution, their concentration, pH of soil solution, the charge density and crystal size of anionic clay etc.     

Effect of alkali on filaments of poly(ethylene terephthalate) and its copolyesters

The alkali hydrolysis of poly(ethylene terephthalate), anionic copolymer of poly(ethylene terephthalate), and block copolymer of poly(ethylene terephthalate)–poly(ethylene glycol) is investigated under a variety of conditions of alkali concentration in aqueous bath, additives, time, and temperature. Measurements of loss in weight, linear density, breaking load, tenacity, elongation to break apart from intrinsic viscosity, fiber density, COOH-end group content, diameter of filaments, and scanning electron micrographs have been analyzed to identify the differences in the action of alkali on these polymer materials.     

NEURAL-NETWORK-AIDED DESIGN OF AUTOMOBILE EXHAUST CATALYSTS

A priori design of catalysts is not yet possible. Such task would demand unavailable scientific knowledge of the correlations among synthesis parameters and resulting solid state and surface structures, on the one hand, and among those atomic-level structural details and their catalytic functions, on the other hand. To avoid testing every possible combination, therefore, the applied chemist or chemical engineer must identify empirical correlations underlying the existing experimental data base.

The ability of artificial neural networks to identify complex correlations and to predict the result of experiments has recently generated considerable interest in various areas of science and engineering. In this paper, neural networks are used to identify composition-performance relationships in automobile exhaust catalysts.

This work employs an artificial neural network technique to do a sensitivity analysis of the conversions of pollutant gases as a function of the catalyst composition and the operating conditions. This approach converges on the optimum catalyst composition and operating condition in order to produce specified conversions of carbon monoxide, hydrocarbons and nitrogen oxides, to carbon dioxide, water and di-nitrogen respectively.     

Biobased flexible polyurethane foams manufactured from lactide-based polyester-ether polyols for automotive applications

In this study, biobased polyester-ether polyols derived from meso-lactide and dimer acids were evaluated for flexible polyurethane foams (PUF) applications. Initially, the catalyst concentration was optimized for the biobased PUF containing 30% of biobased polyol (70% petroleum-based polyol). Then, the same formulation was used for biobased PUF synthesis containing 10%–40% of biobased polyols. The performance of biobased PUF was compared with the performance of the control foam made with 100% petroleum-based polyol. The characteristic times (cream, top of the cup, string gel, rise, tack-free) of biobased PUF were determined. The biobased PUF were evaluated for the mechanical (tensile and compressive) and morphological properties. As the wet compression set is important for automotive applications, it was measured for all biobased PUF. The thermal degradation behavior of biobased PUF was also evaluated and compared with the control foam. The effect of different hydroxyl and acid values of polyols on the mechanical properties of biobased PUF is also discussed. The miscibility of all components of PUF formulations is crucial in order to produce a foam with uniform properties. Thus, the miscibility of biobased polyols with commercial petroleum-based polyol was studied.     

An investigation of phase transformation behavior in sputter-deposited PtMn thin films

Sputter-deposited, equiatomic PtMn thin films have application in giant magnetoresistive spin valves, tunneling magnetoresistive spin valves, and magnetic random access memory. However, the as-deposited films are found to be a disordered A1 phase in a paramagnetic state rather than an antiferromagnetic phase with L1₀ structure, which is needed for device operation. Therefore, a postannealing step is required to induce the phase transformation from the asdeposited A1 face-centered-cubic phase to the antiferromagnetic L1₀ phase. The A1 to L1₀ metastable transformation was studied by x-ray diffraction and differential-scanning calorimetry. An exothermic transformation enthalpy of −12.1 kJ/mol of atoms was determined. The transformation kinetics were simulated using the Johnson-Mehl-Avrami analysis.     

VBTC: GPU‐Friendly Variable Block Size Texture Encoding

Recent advances in computer graphics have relied on high‐quality textures in order to generate photorealistic real‐time images. Texture compression standards meet these growing demands for data, but current texture compression schemes use fixed‐rate methods where statically sized blocks of pixels are represented using the same numbers of bits irrespective of their data content. In order to account for the natural variation in detail, we present an alternative format that allows variable bit‐rate texture compression with minimal changes to texturing hardware. Our proposed scheme uses one additional level of indirection to allow the variation of the block size across the same texture. This single change is exploited to both vary the amount of bits allocated to certain parts of the texture and to duplicate redundant texture information across multiple pixels. To minimize hardware changes, the method picks combinations of block sizes and compression methods from existing fixed‐rate standards. With this approach, our method is able to demonstrate energy savings of up to 50%, as well as higher quality compressed textures over current state of the art techniques.