排序方式: 共有26条查询结果,搜索用时 15 毫秒
1.
Tijana Dimitrijević Jugoslav Joković Bratislav Milovanović Nebojša Dončov 《国际射频与微波计算机辅助工程杂志》2012,22(2):184-192
This article describes an implementation of a compact wire model into the three‐dimensional transmission‐line matrix (TLM) cylindrical mesh for the purpose of an efficient analysis of probe‐coupled cylindrical microwave cavity devices. Because of a cylindrical grid structure and empirical nature of the compact model, this implementation has to take into account a change of wire model parameters with a variable cross section of the TLM nodes through which a wire conductor passes. The model accuracy has been experimentally verified and compared with the corresponding results reached by the TLM method based on a rectangular grid in order to consider its advantages. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012. 相似文献
2.
Nina Radić Bratislav M. Obradović Mirjana Kostić Biljana Dojčinović Milorad M. Kuraica Mirko Černák 《Surface & coatings technology》2012
The aim of this work is plasma activation of nonwoven polypropylene (PP) using two different ambient air plasma sources: volume dielectric barrier discharge (DBD) and diffuse coplanar surface barrier discharge (DCSBD) and its functionalization by silver ion deposition. 相似文献
3.
Ljubomir Vajda Milan Verĉon Elena Vuĉetiĉ Smilja Dzakoviĉ Radivoe Eftimiades Božidar Jovanoviĉ Aleksandr Konstantinoviĉ Dejan Mandiĉ Melentieviĉ Mirko Vlastimir Puriĉ Bratislav Subbanoviĉ Josif Hvoj Miodrag Coroviĉ 《Power Technology and Engineering (formerly Hydrotechnical Construction)》1969,3(6):578-579
4.
Hierarchical neural model for an efficient one‐dimensional direction of arrival (DoA) estimation of stochastic electromagnetic (EM) sources with a variable radiation power is proposed. Model is trained to provide an azimuth position of such sources based on a spatial correlation matrix obtained by a signal sampling at a reception point and then used as an input to a neural model. It consists of two hierarchical levels realized by the multilayer perceptron (MLP)‐based neural networks. The first level is responsible to reduce the dimensionality of the considered DoA problem which allows for its easier solution at the second level. Accuracy and run‐time of the proposed model is verified on an example of determining the azimuth position of two stochastic EM sources in noisy conditions through comparison with a standalone MLP model and a model based on the root MUSIC algorithm. 相似文献
5.
Zoltan Nagy Bratislav Svetozarevic Prageeth Jayathissa Moritz Begle Johannes Hofer Gearoid Lydon Anja Willmann Arno Schlueter 《建筑学研究前沿(英文版)》2016,5(2):143
The Adaptive Solar Facade (ASF) is a modular, highly integrated dynamic building facade.The energetic behavior as well as the architectural expression of the facade can be controlled with high spatio-temporal resolution through individually addressable modules. We present the general design process, the current mechanical design, and simulation results on photovoltaic power production and building energy consumption. We introduce the controller concept and show results on solar tracking as well as user interaction. Lastly, we present our current and planned prototypes. 相似文献
6.
Branko Matović Jelena Maletaškić Tatiana Prikhna Vladimir Urbanovich Vladimir Girman Maksym Lisnichuk Bratislav Todorović Kutsami Yoshida Ivana Cvijović-Alagić 《Journal of the European Ceramic Society》2021,41(9):4755-4760
Additive-free boron carbide (B4C) – silicon carbide (SiC) ceramic composites with different B4C and β-SiC powders ratio were densified using the high-pressure “anvil-type with hollows” apparatus at 1500 °C under a pressure of 4 GPa for 60 s in air. The effect of starting powders ratio on the composites sintering behavior, relative density, microstructural development, and thermomechanical properties was studied. The sintered samples hardness was found to be in the range from 24 to 31 GPa. The thermal conductivity measurements, conducted in the temperature range from room temperature to 1000 °C, showed that the thermal diffusivity of sintered samples was between 6 and 9.5 mm2/s whereas the thermal conductivity was in the range from 16 to 28 W/(m K). The results of this study show that the high-pressure sintering can be a very effective low-temperature densification method for the obtainment of additive-free B4C - β-SiC ceramic composites. 相似文献
7.
The linearization technique that uses simultaneous injection of the second harmonics into the amplifier input and their feedforwarding to the amplifier output is suggested. This technique reduces the third‐order intermodulation products in multichannel amplifiers when amplifiers operate closer to saturation. © 2007 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2007. 相似文献
8.
In this paper, the use of the virtual fields method for the identification of a strongly asymmetric compression–tension response of rock-like materials under dynamic tensile loading is investigated. The photomechanical spalling set-up is used, which induces an indirect tensile load in a non-balanced sample, and the inertial component of the test is directly related to the measured dynamic stress with no previous assumption on the material behaviour. This experimental method provides a direct route to identifying the material asymmetric constitutive response in compression and tension under a uniaxial stress state as well as the material non-linear response after tensile strength is reached. To validate this approach, the entire measurement chain for the case of a post-peak response is investigated through simulated experiments that incorporate a damage model and synthetic grid images. Finally, the method is applied to the case of granite rock, namely, a Bohus granite, as to directly measure the material asymmetric compression–tension and the softening response after peak tensile stress. 相似文献
9.
Milica Vucinic-Vasic Marko Boskovic Aleksandar Antic Goran Stojanovic Milan Radovanovic Martin Fabian Cedomir Jovalekic Miodrag B. Pavlovic Bratislav Antic 《Ceramics International》2014
Nickel ferrite nanoparticles were annealed in order to find dependence of electric/magnetic properties on crystallite size. The following correlations of crystallite size with physical parameters were found: (a) lattice parameter decreases with the increase in size and it reaches value for bulk counterpart approximately for crystallites bigger than 7 nm, (b) ac electrical resistivity at room temperature increases with the increase in crystallite size, (c) for crystallites of ~7 nm or smaller electrical resistivity have maximum value at 50 °C, (d) the real part of permittivity at selected frequency generally decreases with the increase in crystallite size and (e) magnetization increases with the increase in crystallite size. Deviation of stoichiometry, cation polyvalence, and cation redistribution with annealing are the main factors that influence physical properties of Nickel ferrite nanoparticles. 相似文献
10.
Decolorization of reactive textile dyes using water falling film dielectric barrier discharge 总被引:2,自引:0,他引:2
Dojčinović BP Roglić GM Obradović BM Kuraica MM Kostić MM Nešić J Manojlović DD 《Journal of hazardous materials》2011,192(2):763-771
Decolorization of reactive textile dyes Reactive Black 5, Reactive Blue 52, Reactive Yellow 125 and Reactive Green 15 was studied using advanced oxidation processes (AOPs) in a non-thermal plasma reactor, based on coaxial water falling film dielectric barrier discharge (DBD). Used initial dye concentrations in the solution were 40.0 and 80.0 mg/L. The effects of different initial pH of dye solutions, and addition of homogeneous catalysts (H2O2, Fe2+ and Cu2+) on the decolorization during subsequent recirculation of dye solution through the DBD reactor, i.e. applied energy density (45-315 kJ/L) were studied. Influence of residence time was investigated over a period of 24 h. Change of pH values and effect of pH adjustments of dye solution after each recirculation on the decolorization was also tested. It was found that the initial pH of dye solutions and pH adjustments of dye solution after each recirculation did not influence the decolorization. The most effective decolorization of 97% was obtained with addition of 10 mM H2O2 in a system of 80.0 mg/L Reactive Black 5 with applied energy density of 45 kJ/L, after residence time of 24 h from plasma treatment. Toxicity was evaluated using the brine shrimp Artemia salina as a test organism. 相似文献