Performance evaluation of cloud computing platforms using statistical methods

Cloud computing is a very attractive research topic. Many studies have examined the infrastructure as a service and software as a service aspects of cloud computing; however, few studies have focused on platform as a service (PaaS). According to recent reports, demand for enterprise PaaS solutions will increase continuously. However, different sectors require different types of PaaS applications and computing resources. Therefore, an evaluation and ranking framework for PaaS solutions according to application needs is required. To address this need, this study presents the most essential aspects of PaaS solutions and provides a framework for evaluating the performance of PaaS providers. It also proposes a suitable set of benchmarking algorithms that can help determine the most appropriate PaaS provider based on different resource needs and application requirements. Performance evaluations of three well-known cloud computing PaaS providers were conducted using the analytic hierarchy process and the logic scoring of preference methods.     

THE METHOD OF LINES SOLUTION OF THE DISCRETE ORDINATES METHOD FOR RADIATIVE HEAT TRANSFER IN ENCLOSURES

A radiation code based on the method of lines (MOL) solution of the discrete ordinates method (DOM) for transient three-dimensional radiative heat transfer in rectangular enclosures for use in conjunction with a computational fluid dynamics (CFD) code based on the same approach was developed. Assessment of the predictive accuracy of the code by benchmarking its steady-state solutions against exact solutions on one- and three-dimensional test problems shows that the MOL solution of the DOM provides accurate and computationally efficient solutions for radiative heat fluxes and source terms and can be used with confidence in conjunction with CFD codes for transient problems.     

Effects of Recycling on the Mechanical Behavior of Polypropylene at Room Temperature Through Statistical Analysis Method

This article reports the effects of recycled material percentage, annealing conditions, and glass fiber percentage on the mechanical behavior of injection molded polypropylene samples. Specimens were prepared with different percentages of recycled material ranging from 0 to 100%. Two groups of samples, i.e., non‐annealed and annealed at 150°C, were tested to investigate annealing effects. The effects of adding fiber (0–7.5%) to specimens was also investigated. It was found that increasing the amount of recycled material improves the material properties in a non‐linear trend. Annealing had a significant positive effect on both non‐fiber‐added and fiber‐added samples: it improved the yield stress of non‐reinforced polypropylene samples by more than 10% and their Young's modulus by about 50%. Fiber‐added materials showed more variability, and adding fiber also improved the Young's modulus and the yield stress of the samples by about 50%. The results indicate that the three factors investigated improved toughness of the injected polypropylene samples; however the effects are not significant. The study findings reveal that using recycled polypropylene has no significant effect on the material properties of polypropylene. POLYM. ENG. SCI., 56:1283–1290, 2016 © 2016 Society of Plastics Engineers     

Fabrication of oriented electrospun cellulose nanocrystals–polystyrene composite fibers on a rotating drum

Nitrobenzene (CNC-1), trifluoromethyl benzene (CNC-2) modified and polystyrene-grafted (CNC-g) cellulose nanocrystals in polystyrene (PS)-N,N dimethylformamide (DMF) solutions were electrospun and collected as stretched and aligned fibers on a rotating drum. Scanning electron microscope pictures showed significant alignment in the case of unmodified and nitrobenzene-modified CNC-1/PS nanocomposite fibers once the linear speed of rotor reached to 15 m s⁻¹. Fiber diameter decrease was more strong with rotor speed increase in the case of trifluoromethyl benzene modified (CNC-2) and polystyrene-grafted (CNC-g) cellulose nanocrystals/PS systems. Dynamic mechanical analysis including storage and elastic modulus of electrospun-oriented fibers were performed on surface-modified and polymer-grafted CNC/PS samples. According to α transition peak, the increase in the glass-transition temperature with filler concentration was the highest in polymer-grafted CNC-g/PS composite fibers. It was due to the interpenetration of grafted polymer brushes and free polymer chains in continuous phase and resulted in restrictions of motions of polymer chains in the PS matrix. The elastic moduli of nitrobenzene (CNC-1) and trifluoromethyl benzene (CNC-2)-modified CNC-filled PS composite fibers agreed well with percolation model, which indicates the CNC–CNC interactions and network formation with an increase in concentration. Magnitude of the elastic modulus of polymer grafted CNC-g at 0.33 vol % in PS was significantly higher than the prediction from percolation theory. It was due the immobilized polymer chains around CNC-g particles. However, grafted polymer chains, at higher CNC concentrations acted like stickers among CNC particles and caused CNC agglomerates with entrapped free polystyrene from the matrix, thus caused a decrease in the elastic modulus. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48942.     

Novel link adaptation for TETRA cellular systems

One of the main challenges for future wireless systems is to enhance the effective data throughput by exploiting the allocated bandwidth as much as possible. Among several approaches at different layers, one of the most important is constituted by the so‐called link adaptation (LA) techniques. They are characterized by the adaptation of a set of transmission parameters to the channel state in order to improve performance. In this context, this paper is focused on the analysis of a particular class of LA techniques called adaptive modulation and coding, where the modulation and coding rate of transmission can vary according to the channel behavior. In particular, a novel LA algorithm, namely the timed window (TW) method, suitable for time‐division Duplex systems is proposed here. The performance of the TW algorithm is evaluated by taking actual user mobility conditions, communication channel behavior, as well as the physical layer effects into account. Finally, it is important to stress that, even if the wireless bearer considered in this study is TETRA (TErrestrial Trunked RAdio), the approach is quite general and it can be of interest for other wireless networks and can be optimized for different channel models (e.g. TU50, HT200, etc.). Copyright © 2008 John Wiley & Sons, Ltd.     

Biodiversity and technological properties of yeasts from Turkish sourdough

Food Science and Biotechnology - In this study, yeasts were isolated and characterized from twelve traditional sourdough samples which belongs to Black Sea and Aegean regions of Turkey. Twenty six...     

Resuspension of soil as a source of airborne lead near industrial facilities and highways

Geologic materials are an important source of airborne particulate matter less than 10 microm aerodynamic diameter (PM10), but the contribution of contaminated soil to concentrations of Pb and other trace elements in air has not been documented. To examine the potential significance of this mechanism, surface soil samples with a range of bulk soil Pb concentrations were obtained near five industrial facilities and along roadsides and were resuspended in a specially designed laboratory chamber. The concentration of Pb and other trace elements was measured in the bulk soil, in soil size fractions, and in PM10 generated during resuspension of soils and fractions. Average yields of PM10 from dry soils ranged from 0.169 to 0.869 mg of PM10/g of soil. Yields declined approximately linearly with increasing geometric mean particle size of the bulk soil. The resulting PM10 had average Pb concentrations as high as 2283 mg/kg for samples from a secondary Pb smelter. Pb was enriched in PM10 by 5.36-88.7 times as compared with uncontaminated California soils. Total production of PM10 bound Pb from the soil samples varied between 0.012 and 1.2 mg of Pb/kg of bulk soil. During a relatively large erosion event, a contaminated site might contribute approximately 300 ng/m3 of PM10-bound Pb to air. Contribution of soil from contaminated sites to airborne element balances thus deserves consideration when constructing receptor models for source apportionment or attempting to control airborne Pb emissions.     

Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.     

Empirical Correlations for Estimating Filtrate Volume of Water Based Drilling Fluids

Standard American Petroleum Institute (API) filter press is generally used for identifying the filtrate volume of drilling fluids and works only at very low pressures. In fact, during a drilling operation, at downhole conditions, the pressures encountered are significantly higher than what is used during standard API filter press tests. A relationship between the well-known fluid properties and the filtrate volume test is developed. In this study, experiments have been conducted for different water-clay mixtures with varying concentrations at different pressure values by using standard API filter press and HP&HT (high-pressure high-temperature) filter press. The relationship between physical and chemical properties of water-clay mixtures and filtrate volume is analyzed. An empirical correlation has been developed for estimating filtrate volume using basic information of the mud (i.e., rotational viscometer readings, density, pressure, cation exchange capacity, and chemical composition). The developed correlation can estimate filtrate volume with an error less than 20% for a wide range of pressure values.     

Poly(methyl methacrylate)/POSS hybrid networks by type II photoinitiated free radical polymerization

A new strategy for organic–inorganic hybrid networks is presented through in‐situ Type II photoinitiated polymerization of methyl methacrylate with diethanolamino‐functionalized polyhedral oligomeric silsesquioxanes (POSS‐DEA). The diethanolamino groups are simply incorporated onto POSS nanoparticles by nucleophilic ring‐opening reaction of commercially available epoxycyclohexyl POSS and diethanol amine. The photoinitiated polymerization of methyl methacrylate in the presence of benzophenone as photosensitizer and POSS‐DEA as hydrogen donor leads to poly(methyl methacrylate) (PMMA)/POSS hybrid networks under UV light irradiation. The morphology and thermal properties of hybrid networks are investigated by using Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and transmission electron microscopy. The morphology results confirm that POSS cages are homogeneously distributed in PMMA matrix at the molecular levels, whereas the thermal analyses shows that the obtained hybrid networks have higher glass transition temperatures and better thermal stabilities compared to parent PMMA homopolymer. POLYM. COMPOS., 35:1614–1620, 2014. © 2013 Society of Plastics Engineers