排序方式: 共有11条查询结果,搜索用时 13 毫秒
1.
Luneckas Mindaugas Luneckas Tomas Udris Dainius Plonis Darius Maskeliūnas Rytis Damaševičius Robertas 《Intelligent Service Robotics》2021,14(1):9-24
Intelligent Service Robotics - Walking robots are considered as a promising solution for locomotion across irregular or rough terrain. While wheeled or tracked robots require flat surface like... 相似文献
2.
Comparative characterization of particle emissions from asbestos and non-asbestos cement roof slates
Prasauskas Tadas Martuzevicius Dainius Krugly Edvinas Kliucininkas Linas Kireitseu Maksim Zerrath Axel 《Building and Environment》2011
The first aim of this study was to characterise total and size-fractionated particulate matter (PM) aerosol, including fibres, released from the processing operations of cement roofing slates. The second aim was to compare particle emissions from asbestos-cement and non-asbestos cement sheets, with respect to total and size-fractionated particulate matter as well as fibres emissions. Asbestos and cellulose-based cement sheets were compared during slate treatment processes, namely crushing, rubbing, rasping and scrubbing. Generated PM and fibres were classified by a variety of methods (PM2.5 and PM10 cyclones, aerodynamic particle spectrometer and optical particle counter). A substantial variation in the mass of generated particles has been noticed, both within each PM fraction and between different treatment processes. The PM10/PMtotal concentration ratio ranged from 70 to 98% and PM2.5/PMtotal ratio equalled to ∼20%. The new generation non-asbestos sheets produced three times higher PM emissions than asbestos-cement sheets during crushing operation. Particle size distribution of number concentrations was mostly bimodal (two modes at 0.5 and 2.5 μm). With respect to fibres, the release of cellulose fibres from non-asbestos slates was from 1.8 to 13 times lower in comparison with asbestos fibres. At the same time, cellulose fibre length was 1.4–1.6 times lower. Hence, new generation non-asbestos roofing slates were proved to be less hazardous from the point of view of fibre release, but more hazardous with respect to total particle release. 相似文献
3.
A piezoelectric sprayer was recently developed for precision release of odor stimuli in olfactory research. The device replaces conventional dispensers used to release semiochemicals in studies of moth flight toward odor sources. However, the device generates high-frequency sounds in the range that some moths can hear. Ultrasound from the standard set-up sprayer had a considerable impact on flight behavior of the silver Y moth, Autographa gamma, tested in a flight tunnel. It was affected at all behavioral stages when the dispenser was driven at 120 kHz. Only 5% of the moths reached the source when exposed to 120-kHz sound from the dispenser compared to 65% in the control group without sound. The proportion taking flight was also reduced. Hearing threshold curves obtained electrophysiologically revealed that moths were sensitive to the frequency range at which the sprayer was operated and that sound intensity from the sprayer was up to 40 dB above the moths' electrophysiological hearing threshold. The audiogram for A. gamma was similar to audiograms obtained for other noctuids. Hearing sensitivity was highest at around 15 kHz, where the threshold was 35 dB SPL (sound pressure level). The threshold increased with frequency up to 94 dB SPL at 160 kHz. We improved the sprayer to operate at 300 kHz, which is beyond the hearing ability of most insects with ears. At this high frequency, the moths' sensitivity to ultrasound is reduced considerably, and we did not observe any effect on flight behavior compared to a control group without sound. Accordingly, this new piezoelectric sprayer can be used with ultrasound-sensitive insects and insensitive insects alike. 相似文献
4.
Liuliu Du Virpi Leivo Tadas Prasauskas Martin Tubel Dainius Martuzevicius Ulla Haverinen‐Shaughnessy 《Indoor air》2019,29(4):686-697
We assessed 45 multifamily buildings (240 apartments) from Finland and 20 (96 apartments) from Lithuania, out of which 37 buildings in Finland and 15 buildings in Lithuania underwent energy retrofits. Building characteristics, retrofit activities, and energy consumption data were collected, and Indoor Air Quality (IAQ) parameters, including carbon monoxide (CO), nitrogen dioxide (NO2), formaldehyde (CH2O), selected volatile organic compounds (benzene, toluene, ethylbenzene, and xylenes (BTEX), radon, and microbial content in settled dust were measured before and after the retrofits. After the retrofits, heating energy consumption decreased by an average of 24% and 49% in Finnish and Lithuanian buildings, respectively. After the retrofits of Finnish buildings, there was a significant increase in BTEX concentrations (estimated mean increase of 2.5 µg/m3), whereas significant reductions were seen in fungal (0.6‐log reduction in cells/m2/d) and bacterial (0.6‐log reduction in gram‐positive and 0.9‐log reduction in gram‐negative bacterial cells/m2/d) concentrations. In Lithuanian buildings, radon concentrations were significantly increased (estimated mean increase of 13.8 Bq/m3) after the retrofits. Mechanical ventilation was associated with significantly lower CH2O concentrations in Finnish buildings. The results and recommendations presented in this paper can inform building retrofit studies and other programs and policies aimed to improve indoor environment and health. 相似文献
5.
Inga Andriul Dalia Pangonyt Asfree Gwanyanya Dainius Kar
iauskas Kanigula Mubagwa Regina Ma
ianskien 《International journal of molecular sciences》2022,23(23)
Magnesium-sensitive transient receptor potential melastatin (TRPM) ion channels, TRPM6 and TRPM7, are present in several organs, but their roles in the heart remain unclear. Therefore, here, we studied the expression patterns of TRPM6 and TRPM7 in normal and diseased myocardium. Cardiac atrial tissue and cardiomyocytes were obtained from healthy pigs and undiseased human hearts as well as from hearts of patients with ischemic heart disease (IHD) or atrial fibrillation (AF). Immunofluorescence and ELISA were used to detect TRP proteins. TRPM6 and TRPM7 immunofluorescence signals, localized at/near the cell surface or intracellularly, were detected in pig and human atrial tissues. The TRP channel modulators carvacrol (CAR, 100 µM) or 2-aminoethoxydiphenyl borate (2-APB, 500 µM) decreased the TRPM7 signal, but enhanced that of TRPM6. At a higher concentration (2 mM), 2-APB enhanced the signals of both proteins. TRPM6 and TRPM7 immunofluorescence signals and protein concentrations were increased in atrial cells and tissues from IHD or AF patients. TRPM6 and TRPM7 proteins were both detected in cardiac atrial tissue, with relatively similar subcellular localization, but distinctive drug sensitivity profiles. Their upregulated expression in IHD and AF suggests a possible role of the channels in cardiac atrial disease. 相似文献
6.
7.
Spray pyrolysis has been applied to deposit a wide variety of thin films. These films were used in various devices such as solar cells, sensors, and solid oxide fuel cells. It is observed that often the properties of deposited thin films depend on the preparation conditions. An extensive review of the effects of spray parameters on film quality is given to demonstrate the importance of the process of optimization. The substrate surface temperature is the most critical parameter as it influences film roughness, cracking, crystallinity, etc. Processes involved in the spray pyrolysis technique are discussed in this review as well. 相似文献
8.
Lee T Grinshpun SA Martuzevicius D Adhikari A Crawford CM Luo J Reponen T 《Indoor air》2006,16(1):37-47
This field study investigated the relationship between indoor and outdoor concentrations of airborne actinomycetes, fungal spores, and pollen. Air samples were collected for 24 h with a button inhalable aerosol sampler inside and outside of six single-family homes located in the Cincinnati area (overall, 15 pairs of samples were taken in each home). The measurements were conducted during three seasons - spring and fall 2004, and winter 2005. The concentration of culturable actinomycetes was mostly below the detection limit. The median indoor/outdoor ratio (I/O) for actinomycetes was the highest: 2.857. The indoor of fungal and pollen concentrations followed the outdoor concentrations while indoor levels were mostly lower than the outdoor ones. The I/O ratio of total fungal spores (median=0.345) in six homes was greater than that of pollen grains (median=0.025). The low I/O ratios obtained for pollen during the peak ambient pollination season (spring) suggest that only a small fraction penetrated from outdoor to indoor environment. This is attributed to the larger size of pollen grains. Higher indoor concentration levels and variability in the I/O ratio observed for airborne fungi may be associated with indoor sources and/or higher outdoor-to-indoor penetration of fungal spores compared to pollen grains. Practical Implication This study addresses the relationship between indoor and outdoor concentrations of three different types of bio-aerosols, namely actinomycetes, fungal spores, and pollen grains. The results show that actinomycetes are rare in indoor and outdoor air in Midwest, USA. Exposure to pollen occurs mainly in the outdoor air even during peak pollen season. Unexpectedly high fungal spore concentrations were measured outdoors during winter. The presented pilot database on the inhalable levels of indoor and outdoor bio-aerosols can help apportion and better characterize the inhalation exposure to these bio-aerosols. Furthermore, the data can be incorporated into existing models to quantify the penetration of biological particles into indoor environments from outdoors. 相似文献
9.
10.
Roberto Neagu Dainius Perednis Agns Princivalle Elisabeth Djurado 《Surface & coatings technology》2006,200(24):6815-6820
The influence of electrostatic spray deposition (ESD) process parameters such as the substrate temperature, the precursor solution flow rate and the nozzle-to-substrate distance on the morphology of YSZ thin coatings was studied. Each parameter was studied separately and the correlation between them was found in order to optimise the experimental conditions where dense, continuous zirconia coatings can be successfully deposited. 相似文献