Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved     

90-nm process-variation adaptive embedded SRAM modules with power-line-floating write technique

The power consumption of a low-power system-on-a-chip (SoC) has a large impact on the battery life of mobile appliances. General SoCs have large on-chip SRAMs, which consume a large proportion of the whole LSI power. To achieve a low-power SoC, we have developed embedded SRAM modules, which use some low-power SRAM techniques. One technique involves expanding the write margin; another is a power-line-floating write technique, which enables low-voltage write operation. The power-line-floating write technique makes it possible to lower the minimum operating supply voltage by 100 mV. The other techniques involve using a process-variation-adaptive write replica circuit and reducing leakage current. These techniques reduce active power during write operations by 18% and reduce active leakage of the word-line driver by 64%. The prototype SRAM modules achieve 0.8-V operation, and a 512-kb SRAM module achieves 48.4-/spl mu/A active leakage and 7.8-/spl mu/A standby leakage with worst-leakage devices.     

Microcrack generation and its healing in the oxide scale formed on Fe-Cr alloys

Fe -base alloys containing 5, 10, and 20 wt. % Cr were oxidized in a stream of O₂ at 750 and 900°C up to 264 hr. A sulfur decoration method was applied to detect the cracks generated in the scale during oxidation. This method revealed frequent crack generation and its healing in the scale. In the case of low-Cr alloys, the cracks are filled up with newly formed Fe-rich oxide but may be regenerated during further oxidation. Cracks are generated in the scale on an Fe-20Cr alloy also, although this alloy is not so severely attacked because of rapid healing.     

Investigating the multi-causal and complex nature of the accident causal influence of construction project features

Construction project features (CPFs) are organisational, physical and operational attributes that characterise construction projects. Although previous studies have examined the accident causal influence of CPFs, the multi-causal attribute of this causal phenomenon still remain elusive and thus requires further investigation. Aiming to shed light on this facet of the accident causal phenomenon of CPFs, this study examines relevant literature and crystallises the attained insight of the multi-causal attribute by a graphical model which is subsequently operationalised by a derived mathematical risk expression that offers a systematic approach for evaluating the potential of CPFs to cause harm and consequently their health and safety (H&S) risk implications. The graphical model and the risk expression put forth by the study thus advance current understanding of the accident causal phenomenon of CPFs and they present an opportunity for project participants to manage the H&S risk associated with CPFs from the early stages of project procurement.     

Feasibility of zeolites in converting butyric acid into propylene for biorefineries

The biorefinery has been recognized as a new industry to produce both energy and chemical materials such as olefins and BTX from renewable resources. In this context the conversion of butyric acid over zeolites was investigated for establishing a new production route of propylene. Propylene was mainly generated by decarbonylation and dehydration of butyric acid. Our study proved that H-ZSM-5 (750) and silicalite were the best industrial catalyst among the tested ones. For H-ZSM-5 (750), the selectivity of propylene reached 64.2 C% and the ratio of the yield for propylene to theoretical yield (75 C%) became 85.6%.     

Mitigating the health and safety influence of subcontracting in construction: The approach of main contractors

Subcontracting is noted for its adverse health and safety (H&S) influence in construction. Using interviews with five of the top 20 UK contractors and one medium-sized contractor, this study explored how main contractors manage the H&S influence of subcontracting with a focus on their in-house measures. Some in-house measures found are: restricting the layers of subcontractors on projects; working with a regular chain of subcontractors; implementing a H&S reward scheme for subcontractors; and insisting on non-working subcontractor foremen who have direct responsibility for the safety of workers in their trade. These measures appear to be influenced by clients, industry peer groups, and the moral justification for occupational H&S, and they offer inter-organisational learning opportunities for contractors in devising measures to mitigate the H&S influence of subcontracting. These findings should also allay concerns that removing some of the legislative hurdles in connection with on-going red tape debate will result in poorer H&S.     

Poxvirus virions: their surface ultrastructure and interaction with the surface membrane of host cells

Virions of vaccinia and orf viruses were examined by ultrahigh-resolution scanning electron microscopy using a non-coating method. Intracellular mature particles of vaccinia virus appeared to be covered with a net and ultrastructurally their surface consists of many fine ridges and globules, while the surfaces of orf virus mature particles recovered from infected cells consist of spirally running protrusions. The ridge-like structures of vaccinia virus were presumed to correspond to surface tubules shown by negative staining of this virus, while the spiral protrusions of orf virus were presumed to correspond to spiral threads having a criss-cross appearance by the same staining. Using scanning electron microscopy in which the samples were prepared by the conventional method, we observed: (i) many virions, i.e. one or two hundreds, or occasionally more reaching about one thousand particles, of the IHD strain of vaccinia virus, (ii) many or a moderate number of virions, i.e. about one hundred or fewer particles, of the 58 strain of cowpox virus and (iii) rather few virions, i.e. several tens or fewer particles, of the Iwate strain of orf virus on the free surface of each cell infected with these viruses. It must be noted that the number of virions detected considerably differed in respective cells examined. Virus budding was frequently observed at the cell surface of monolayer cells infected with vaccinia virus but it was never detected with cowpox or orf virus, indicating a difference in the mechanism of virus release between vaccinia and the other two viruses. When whole cells infected with vaccinia virus were examined by a combination of high-voltage and scanning electron microscopies, virions on the cell surface and those inside the cells were clearly differentiated. All virions on the cell surface had an envelope, and some of the envelopes had a slack and/or one or more bulges.     

Budding of fowlpox and pigeonpox viruses at the surface of infected cells

Chick embryo fibroblasts and chorioallantoic membranes infected with fowlpox virus (FWPV) or pigeonpox virus (PPV) were examined by transmission and scanning electron microscopy. Immature virus particles were observed in finely granular areas, i.e. virus factories, of the cytoplasm. These particles had various forms depending on their stages of development. Many tubular structures were also seen in these regions. Mature virus particles with ellipsoidal or brick-shaped forms enclosing electron-dense cores were detected throughout the cytoplasm. Notably, there was a high frequency of virus budding at the cell surface, but only occasional virus wrapping in the cytoplasm. Another remarkable feature of the infected cells was accumulation of many virions just beneath the plasma membrane, indicating that this phenomenon is closely related to virus budding. Based on the observed frequency of budding, this mechanism seems to be the predominant way for FWPV and PPV to exit the cell.     

Thermal and optical properties of epoxy/zirconia hybrid materials synthesized via in situ polymerization

Epoxy/zirconia hybrid materials were synthesized from a bisphenol-A type epoxy resin, zirconium-tetra-n-propoxide and acetic acid via in situ polymerization. Acetic acid was used to control the hydrolysis and condensation reaction of the zirconium-tetra-n-propoxide. As a result, the zirconia produced by the in situ polymerization was uniformly dispersed into the epoxy matrix on a nano scale or less, and the hybrid materials exhibited an excellent optical transparency. With the increasing zirconia contents, the storage modulus in the rubbery region increased and the peak area of tanδ in the glass transition temperature region decreased. These results indicate that their heat resistance of the hybrid materials could be improved by hybridization with zirconia. Furthermore, the refractive indices of the hybrid materials were significantly improved with the increasing zirconia contents.