对我国饲料添加剂工业的几点发展建议

指出了我国饲料添加剂品种少、产量低、技术水平低、创新少等问题，提出了发展氨基酸、药物添加剂、生物工程等一系列建议。     

Superhydrophobic and ultraviolet protective nylon fabrics by modified nano silica coating

Superhydrophobic and UV protective textiles are of growing interest from the last few decades. In this study, silica nanoparticles (SiO₂) were synthesized by the sol-gel method. The synthesized silica nanoparticles were applied on nylon knitted fabric by pad-dry-cure technique. The silica nanoparticles coating on fabric was modified by in situ deposition of zinc oxide (ZnO) followed by hydrophobic modification using sodium stearate (SS). The fabrics were characterized by Fourier transform infrared spectroscopy, X ray diffractometry, and scanning electron microscopy. The hydrophobic properties of the fabric were assessed by water contact angle measurement and ultraviolet protection properties of fabric were assessed by Australian/New Zealand Standard (AS/NZS 4399:1996). Modified fabric showed superhydrophobicity with water contact angle of 151°. The fabric also showed excellent ultraviolet protection with ultraviolet protection factor of 279.68. The fabric exhibited retention of hydrophobic and UV protection properties up to 10 washing cycles.     

Application of functionalized coir fibre as eco-friendly oil sorbent

Synthetic polymers are based on the use of crude oil as their raw material. Oil spillage takes place during production, storage, transportation and usage at the water bodies and land surfaces. This may be due to tanker disasters, wars, operation failures, equipment breaking down, accidents and natural disasters. The spilled oil into land, river or ocean imposes a major threat to the environment and endangers the aquatic life. To overcome this problem, oil sorbents are commonly used for cleaning the oil spills. In this paper, coir fibre which was obtained as a waste from coconut fruit was functionalized to increase its hydrophobicity and oil sorption capacity. The product so formed was characterized by FT-IR, TGA and SEM which confirmed grafting of butyl acrylate monomer onto the coir fibres. The effects of time, temperature and monomer concentration on the grafting of coir fibre and oil absorption capacity have also been investigated. Results demonstrated that the modified coir fibre absorbed fair amount of crude oil and studies also indicate that a simple squeezing was sufficient to remove most of the oil sorbed by the fibres so that the sorbents can be reused several times for oil spill clean-up.     

The effect of heat setting on the dyeability of differentially dyeable polyester fibres

Apparent diffusion coefficients of two disperse dyes for so-called easily dyeable/cationic-dyeable polyester (ED-CDPET) and cationic-dyeable polyester (CDPET) fibres of identical linear density and sulphonic acid group content have been calculated. It was found that the diffusion coefficients of dyes for ED-CDPET were far greater than those of dyes for CDPET. The dyeability at the boil without carrier, using disperse and cationic dyes on various ED-CDPET and CDPET fibres, has been studied. ED-CDPET was found to have higher dyeability at all levels of heat setting (irrespective of the dye used). The finest ED-CDPET fibres showed maximum dye uptake as a result of increased surface area. Heat setting in the taut condition reduced dye uptake.     

A process model of cyberbullying in adolescence

Cyberbullying is an emerging form of aggression that utilizes information and communication technologies (ICTs). While cyberbullying incidents attract considerable attention, research on the causes and psychosocial predictors of cyberbullying is still limited. The present study used an integrated theoretical model incorporating empathy, moral disengagement, and social cognitions related to cyberbullying. Structured questionnaires were administered to 355 randomly selected adolescents (M = 14.7, SD = 1.20). Linear regression analysis showed that social norms, prototype similarity and situational self-efficacy directly predicted cyberbullying expectations. Multiple mediation modelling indicated that normative influences mediated the effects of moral disengagement and affective empathy on cyberbullying expectations. These findings provide valuable information regarding the effect of both distal and proximal risk factors for cyberbullying in adolescence, highlight the relationship between normative processes and moral self-regulation, and set the basis for related educational and preventive interventions.     

Polyester nanocomposite fibers with improved flame retardancy and thermal stability

Polyester (PET) nanocomposite fibers were spun by adding master batches of linear low‐density polyethylene (LLDPE) loaded with Montmorillonite (MMT) nanoclay after compatibilizing the PET and LLDPE. The spun fibers showed increased thermal stability as well as flame retardancy, which increased progressively with the amount of nanoclay loaded into the fiber. There is slight decrease in tensile strength of the fiber accompanied by decrease in elongation % indicating addition of nanoclay makes the filaments stiffer. The onset of crystallization temperature occurred at higher temperature in case of composite fibers than on the neat PET fiber because of nucleating effect of nanoclay. The dyeability of the fibers was not affected and also had very little impact on the flame retardancy of the fiber. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Sorption of reactive dyes from aqueous solutions by ordered hexagonal and disordered mesoporous carbons

In the present study two synthetic mesoporous carbons, a highly ordered CMK-3 sample with hexagonal structure and a disordered mesoporous carbon (denoted DMC) were investigated for the sorption of Remazol Red 3BS (C.I. 239) dye in comparison to three commercial activated carbons and a HMS mesoporous silica with a wormhole pore structure. The structural, porosity and surface characteristics of the materials were evaluated using XRD, TEM, N₂ porosimetry, FT-IR spectroscopy and zeta-potential measurements. Optimal dye sorption occurred at pH ～2. Equilibrium sorption data followed the Langmuir model and showed that the two synthetic mesoporous carbons exhibit higher sorption capacities (q_max ～ 500–580 mg/g at 25 °C) in comparison to the commercial activated carbons which possessed either microporous (Takeda 5A and Calgon carbon) or combined micro-/mesoporous (Norit SAE-2) structures and to the HMS mesoporous silica. Thermodynamic parameters as the change in free energy, enthalpy, and entropy of sorption were also estimated. Kinetic studies were carried out and showed a rapid sorption of dye in the first ca. 30 min while equilibrium was reached after ca. 3 h. The sorption kinetics of dye was best described by a second-order kinetic model. A surfactant enhanced carbon regeneration (SECR) technique was used to regenerate the dye-loaded carbon sorbents.     

Aging of packaging films in the marine environment

The present article examines the aging behavior in the marine environment of some representative flexible plastic packaging films including supermarket plastic bags made of low‐density polyethylene (LDPE), polyethylene terephthalate (PET) films, polyamide–polyethylene (PAPE) films and films made of a material under the commercial name Mater‐Bi®. The effect of aging was studied by Fourier transform infrared spectroscopy, differential scanning calorimetry, and tension including creep‐recovery tests. The polyethylene films were not hydrolytically degraded during aging in seawater, and the polyethylene chains did not undergo any substantial chain scission. The PET films after exposure for 8 months in seawater did not suffer any substantial degradation, and the PET chains were plasticized by the absorbed water. After prolonged exposure to seawater (12 months), the PET films started to degrade. The PAPE film underwent extensive chemical and structural changes during aging in seawater as result of plasticization and hydrolysis of the polyamide (PA) component in combination with an eventual loosening of the tie layer. Mater‐Bi® film underwent a severe deterioration during aging in seawater due to the hydrolysis of the starch and polycaprolactone components. All films exhibited a marked degradation of their tensile properties after exposure to accelerating aging conditions under UV radiation. POLYM. ENG. SCI., 59:E432–E441, 2019. © 2019 Society of Plastics Engineers     

From Facebook to the Neighbourhood: Infrastructuring of Hybrid Community Engagement

In recent years, social media have increased the resources that individuals and organizations are able to mobilize for the development of socially innovative practices. In this article, we engage with a naturally occurring development in a Trentinian neighbourhood to examine the cooperative interactions amongst members of a local community. The first author and local residents of the neighbourhood participated in online discussions, decision making, and physical activities that led to material changes in the area. The interventions are motivated by and based on the concept of Social Street that combines online interactions in a closed Facebook group with face-to-face meetings seeking to practically engage the collective in accomplishing certain immediate or ongoing needs. Over the course of two years, we studied this local instantiation of Social Street in Trento, Italy by way of an action-oriented (digital) ethnography. Through this work, we demonstrate how urban neighbourhoods might benefit from hybrid forms of community engagement that are enacted through a constant back and forth between online and face-to-face interactions. We further argue that the infrastructuring of local urban collectives should follow strategies that pay attention to the multiple issues in urban neighbourhoods and people’s attachments to them. Overall, the paper reflects upon the challenges and configurations of participation that this form of community-work entails.