An intercomparison of bio-optical techniques for detecting dominant phytoplankton size class from satellite remote sensing

Satellite remote sensing of ocean colour is the only method currently available for synoptically measuring wide-area properties of ocean ecosystems, such as phytoplankton chlorophyll biomass. Recently, a variety of bio-optical and ecological methods have been established that use satellite data to identify and differentiate between either phytoplankton functional types (PFTs) or phytoplankton size classes (PSCs). In this study, several of these techniques were evaluated against in situ observations to determine their ability to detect dominant phytoplankton size classes (micro-, nano- and picoplankton). The techniques are applied to a 10-year ocean-colour data series from the SeaWiFS satellite sensor and compared with in situ data (6504 samples) from a variety of locations in the global ocean. Results show that spectral-response, ecological and abundance-based approaches can all perform with similar accuracy. Detection of microplankton and picoplankton were generally better than detection of nanoplankton. Abundance-based approaches were shown to provide better spatial retrieval of PSCs. Individual model performance varied according to PSC, input satellite data sources and in situ validation data types. Uncertainty in the comparison procedure and data sources was considered. Improved availability of in situ observations would aid ongoing research in this field.     

Direction-based adaptive data propagation for heterogeneous sensor mobility

We consider sensor networks where the sensor nodes are attached on entities that move in a highly dynamic, heterogeneous manner. To capture this mobility diversity we introduce a new network parameter, the direction-aware mobility level, which measures how fast and close each mobile node is expected to get to the data destination (the sink). We then provide local, distributed data dissemination protocols that adaptively exploit the node mobility to improve performance. In particular, “high” mobility is used as a low cost replacement for data dissemination (due to the ferrying of data), while in the case of “low” mobility either (a) data propagation redundancy is increased (when highly mobile neighbors exist) or (b) long-distance data transmissions are used (when the entire neighborhood is of low mobility) to accelerate data dissemination toward the sink. An extensive performance comparison to relevant methods from the state of the art demonstrates significant improvements, i.e. latency is reduced by even four times while keeping energy dissipation and delivery success at very satisfactory levels.     

The potential of WHR/batch and cullet preheating for energy efficiency in the EU ETS glass industry and the related energy incentives

The European Emissions Trading Scheme (EU ETS) covers approximately 45% of European greenhouse gases (GHGs), 11,000 stationary installations as well as aircraft operators. The EU ETS particularly affects the energy-intensive industries while it imposes a significant risk of “carbon leakage,” i.e., the risk of EU industry departing to countries with weaker restraints on GHG emissions. The EU glass industry, being capital intensive and also requiring long investment cycles, is the world’s largest glass producer with a market share close to one third of global production. Therefore, it is of significant importance to view the position of the EU ETS glass industry in terms of energy conservation possibilities. The present paper utilizes a vertical approach to provide information on both ETS market evolution and specific technical information to support technological innovation to the glass industry. EU ETS glass industry is analyzed regarding the balance between allocated European Union emission allowances (EUAs), verified CO₂ emissions, and potential shortfall in allowances so as to determine the situation of glass industries and the extent of urge for energy-saving activities towards the strengthening of their position within the requirements of the EU ETS phase III. The replication potential of waste heat recovery (WHR) through batch preheating is specifically addressed since it is considered a promising technology according to the latest Best Available Techniques (BAT) reference document for the glass industry under Directive IED 2010/75/EU. A case study for a container glass furnace based on simulation results is presented investigating the impact of different operating and design configurations on specific energy consumption and CO₂ emissions.     

A study on natural clinoptilolite for CO2/N2 gas separation

Based on its low cost and low water adsorption capacity, compared to synthetic zeolites (A-type, X-type and Y-type), natural, untreated clinoptilolite was examined as a potential adsorbent for a separation process targeting on removal of CO₂ from flue gas. Taking into consideration typical flue gas composition and temperature, adsorptive properties of binary CO₂/N₂ mixtures were tested in the temperature range of 268 to 403 K and compared with literature data. The results showed that CO₂ concentration, total pressure, and temperature strongly affect selectivity and working capacity, restricting the conditions under which the material could be used as an efficient adsorbent.     

Microstructure characterization and photocatalytic activity of mesoporous TiO2 films with ultrafine anatase nanocrystallites

A series of mesoporous TiO₂ films on borosilicate glass with ultrafine anatase nanocrystallites were successfully synthesized using a non-acidic sol gel preparation route, which involves the use of nonionic surfactant Tween 20 as template through a self assembly pathway. The microstructure of these TiO₂ films was characterized by XRD, SEM, HR-TEM, UV-Vis spectroscopy, and N₂ adsorption-desorption isotherm analysis. Their photocatalytic activities were investigated by using creatinine as a model organic contaminate in water. It was found that all mesoporous TiO₂ films prepared with Tween 20 exhibited a partially ordered mesoporous structure. The photocatalytic activity of the TiO₂ films could be remarkably improved by increasing Tween 20 loading in the sol at the range of 50% (v/v), which yielded large amount of catalyst (anatase) on the glass support and enhanced specific surface area. The optimum Tween 20 loading was 50% (v/v) in the sol, above which good adhesion between TiO₂ films and borosilicate glass could not be maintained. The final TiO₂ film (Tween 20: final sol = 50%,v/v) exhibits high BET surface area (∼ 120 m²/g) and pore volume (0.1554 cm³/g), ultrafine anatase nanocrystallinity (7 nm), uniform and crack free surface morphology, and improved photocatalytic activity.     

The path towards healthier societies,environments, and economies: a broader perspective for sustainable engineered nanomaterials

Clean Technologies and Environmental Policy - Economic value is no longer adequate by itself as a proxy for the value-added benefits (VAB) assumed to be generated by emerging technologies such as...     

Water supply management approaches using US on the island of Rhodes, Greece

Desalination powered by renewable energy sources (RES) is presented as an alternative option for the water supply augmentation in the semi-arid region of the island of Rhodes. The case study was chosen as the island relies mostly on the exploitation of groundwater resources and faces serious water shortage problems in an already stressed environment. Alternatives are discussed and compared in contrast to the construction of storage dams to meet urban water needs up to the year 2040. Results may indicate that through the use of financial incentives coupled with holistic water management approaches, desalination powered by RES could be an attractive and environmentally friendly option in an effort to solve problems related to water quantity and quality in semi-arid regions with adequate renewable energy potential.     

Effects of water parameters on the degradation of microcystin-LR under visible light-activated TiO2 photocatalyst

A study was performed to determine the effect of pH, alkalinity, natural organic matter (NOM) and dissolved oxygen in the performance of nitrogen and fluorine doped TiO₂ (NF-TiO₂) for the degradation of hepatotoxin microcystin-LR (MC-LR) in synthetic and natural water under visible light irradiation. The initial degradation rate of MC-LR was fastest under acidic conditions (3.50 ± 0.02 × 10⁻³ μM min⁻¹ at pH 3.0) and decreased to 2.29 ± 0.07 × 10⁻³ and 0.54 ± 0.02 × 10⁻³ μM min⁻¹ at pH 5.7 and 7.1, respectively. Attractive forces between the opposite charged MC-LR and NF-TiO₂ are likely responsible for the enhancement in the photocatalytic decomposition of MC-LR resulting from increased interfacial adsorption. For carbonate buffered solutions, the photocatalytic activity of NF-TiO₂ was reduced when increasing the carbonate concentration up to 150 mg CaCO₃ L⁻¹. The scavenging of radical species by the bicarbonate ion at pH 7.1 is discussed. In the presence of NOM, the degradation rates decreased as pH and initial concentration of the NOM increased. The inhibition was higher with fulvic acid than humic acid under alkaline conditions. Oxygenated solution yields higher NF-TiO₂ photocatalytic degradation of MC-LR compared to nitrogen sparged solution at pH 5.7. The involvement of specific reactive oxygen species implicated in the photodegradation is proposed. Finally, no significant degradation is observed with various natural waters spiked with MC-LR under visible light (λ > 420 nm) but high removal was achieved with simulated solar light. This study provides a better understanding of the interactions and photocatalytic processes initiated by NF-TiO₂ under visible and solar light. The results indicate solar photocatalytic oxidation is a promising technology for the treatment of water contaminated with cyanotoxins.