Statistical Optimization for Production of Light Olefins in a Fluidized‐Bed Reactor

The methanol‐to‐olefins reaction (MTO) was studied in a small‐scale fluidized‐bed reactor over synthesized silicoaluminophosphate (SAPO‐34) catalysts. Mesoporous nanocrystalline SAPO‐34 molecular sieves were synthesized hydrothermally by ultrasonic and microwave‐assisted aging processes in the presence of hexadecyltrimethylammonium bromide (CTAB) and tetradecyldimethyl(3‐trimethoxysilylpropyl)ammonium chloride (TPOAC) as surfactant agents. The Box‐Behnken experimental design method was applied to determine the optimum operating parameters of this process conducted in the fluidized‐bed reactor. The optimum conditions in terms of reaction temperature, ratio of inlet gas velocity to minimum fluidizing velocity, and MeOH weight fraction were evaluated.     

Access point selection in the network of Internet of things (IoT) considering the strategic behavior of the things and users

The Journal of Supercomputing - With the expansion in the use of IoT, increasing the efficiency of these networks has become even more significant. Objects need reliable communications at suitable...     

Parallel computation of probabilistic skyline queries using MapReduce

The Journal of Supercomputing - In recent years, numerous applications have been continuously generating large amounts of uncertain data. The advanced analysis queries such as skyline operators are...     

Endothelin receptors mediating vasoconstriction in rat pressurized small arteries

The effects of endothelin-1 (ET-1), a nonselective ETA and ETB receptor agonist, and sarafotoxin S6c, a selective ETB agonist, were investigated in the presence and absence of BQ123 and BQ788, ETA- and ETB-selective antagonists, respectively, in rat mesenteric small arteries, using a perfusion pressurized arteriograph in which segments of vessels were cannulated and exposed to constant pressure and flow. ET-1 (10(-13)-10(-7) M) induced vasoconstriction in both intact and endothelium-denuded arteries in a concentration-dependent manner. BQ123 (10(-7) and 10(-6) M) inhibited the effect of ET-1, displacing the concentration-response curve to the right in a concentration-dependent manner. The effect of ET-1 was not significantly affected by BQ788 (10(-7) and 10(-6) M), a selective antagonist of ETB receptors. Sarafotoxin S6c (10(-11)-10(-7) M) also induced a slight concentration-dependent vasoconstriction. The effect of sarafotoxin S6c (10(-8) M) was inhibited by the ETB-selective antagonist BQ788 (10(-7) M), but was not significantly changed by BQ123 (10(-7) M). Vasoconstriction induced by sarafotoxin S6c (10(-8) M) in a single bolus concentration was significantly greater than the contraction induced by the same concentration as part of a cumulative concentration-response curve, indicating desensitization or downregulation of ETB receptors during the latter. Repeated application of single concentrations of sarafotoxin S6c (10(-8) M) caused progressively smaller contraction of arteries. These results show the existence of both ETA and ETB vasoconstrictor receptors located on smooth muscle of small arteries. They also show that ETB receptors induce a smaller constrictor effect, and rapidly undergo desensitization after sustained or repeated activation.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Synthesis of poly(methyl methacrylate)/silica nanocomposite through emulsion polymerization using dimethylaminoethyl methacrylate

Polymer/Silica nanocomposite latex particles were prepared by emulsion polymerization of methyl methacrylate (MMA) with dimethylaminoethyl methacrylate (DM). The reaction was performed using a nonionic surfactant and in the presence of silica nanoparticles as the seed. The polymer‐coated silica nanoparticles with polymer content and number average particle sizes ranged from 32 to 93 wt % and 114–310 nm, respectively, were obtained depending on reaction conditions. Influences of some synthetic conditions such as MMA, DM, surfactant concentration, and the nature of initiator on the coating of the silica nanoparticles were studied. Electrostatic attraction between anionic surface of silica beads and cationic amino groups of DM is the main driving force for the formation of the nanocomposites. It was demonstrated that the ratio of DM/MMA is important factor in stability of the system. The particle size, polymer content, efficiency of the coating reaction, and morphology of resulted nanocomposite particles showed a dependence on the amount of the surfactant. Zeta potential measurements confirmed that the DM was located at the surface of the nanocomposites particles. Thermogravimeteric analysis indicated a relationship between the composition of polymer shell and polymer content of the nanocomposites. The nanocomposites were also characterized by FTIR and differential scanning calorimetry techniques. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Model reference adaptive impedance control in Cartesian coordinates for physical human–robot interaction

In this paper, a nonlinear model reference adaptive impedance controller is proposed and tested. The controller provides asymptotic tracking of a reference impedance model for the robot end-effector in Cartesian coordinates applicable to rehabilitation robotics or any other human–robot interactions such as haptic systems. The controller uses the parameters of a desired stable reference model which is the target impedance for the robot’s end-effector. It also considers uncertainties in the model parameters of the robot. The asymptotic tracking is proven using Lyapunov stability theorem. Moreover, the adaptation law is proposed in joint space for reducing the complexity of its calculations; however, the controller and the stability proof are all presented in Cartesian coordinates. Using simulations and experiments on a two DOFs robot, the effectiveness of the proposed controller is investigated.     

Covalent Adaptable Microstructures via Combining Two-Photon Laser Printing and Alkoxyamine Chemistry: Toward Living 3D Microstructures

Manufacturing programmable materials, whose mechanical properties can be adapted on demand, is highly desired for their application in areas ranging from robotics, to biomedicine, or microfluidics. Herein, the inclusion of dynamic and living bonds, such as alkoxyamines, in a printable formulation suitable for two-photon 3D laser printing is exploited. On one hand, taking advantage of the dynamic covalent character of alkoxyamines, the nitroxide exchange reaction is investigated. As a consequence, a reduction of the Young´s Modulus by 50%, is measured by nanoindentation. On the other hand, due to its “living” characteristic, the chain extension becomes possible via nitroxide mediated polymerization. In particular, living nitroxide mediated polymerization of styrene results not only in a dramatic increase of the volume (≈8 times) of the 3D printed microstructure but also an increase of the Young's Modulus by two orders of magnitude (from 14 MPa to 2.7 GPa), while maintaining the shape including fine structural details. Thus, the approach introduces a new dimension by enabling to create microstructures with dynamically tunable size and mechanical properties.     

Performance improvement of OFDM systems using compressive sensing with group LASSO signal reconstruction algorithm

Wireless Networks - Orthogonal frequency division multiplexing (OFDM) has been investigated for the high-speed transmission of data in radio frequency and optical wireless communications. The OFDM...