Technological and sensorial properties of liquid nitrogen ice cream enriched with protein from brewing waste (trub)

Debittered trub (brewing waste) is an important source of protein source (70.26%). Trub and whey protein were used for 5% protein enrichment of ice cream frozen by liquid nitrogen. Three formulations were elaborated: ice cream standard (ICS), ice cream with whey protein (ICW) and ice cream with trub (ICT). Chemical composition, rheological properties, texture, overrun, melting rate, scanning electron microscopy and a sensorial test were performed. Results showed that ICT presented a higher viscosity, obtained on the upward curve up to 6.76 Pa s⁻¹, consistency index (22.96 (Pa s⁻¹)ⁿ), hysteresis area (140.40 mPa s⁻¹) and hardness (31113.33 g) but a lower melting rate (0.38 g min⁻¹), overrun (13.92%) and sensorial acceptability than the other formulations. The addition of trub debittered for protein enrichment improved ice cream properties and demonstrated that it could be used as a food ingredient.     

OWL‐based acquisition and editing of computer‐interpretable guidelines with the CompGuide editor

Computer‐Interpretable Guidelines (CIGs) are the dominant medium for the delivery of clinical decision support, given the evidence‐based nature of their source material. Therefore, these machine‐readable versions have the ability to improve practitioner performance and conformance to standards, with availability at the point and time of care. The formalisation of Clinical Practice Guideline knowledge in a machine‐readable format is a crucial task to make it suitable for the integration in Clinical Decision Support Systems. However, the current tools for this purpose reveal shortcomings with respect to their ease of use and the support offered during CIG acquisition and editing. In this work, we characterise the current landscape of CIG acquisition tools based on the properties of guideline visualisation, organisation, simplicity, automation, manipulation of knowledge elements, and guideline storage and dissemination. Additionally, we describe the CompGuide Editor, a tool for the acquisition of CIGs in the CompGuide model for Clinical Practice Guidelines that also allows the editing of previously encoded guidelines. The Editor guides the users throughout the process of guideline encoding and does not require proficiency in any programming language. The features of the CIG encoding process are revealed through a comparison with already established tools for CIG acquisition.     

Synthesis of Benzophenones and in vitro Evaluation of Their Anticancer Potential in Breast and Prostate Cancer Cells

Breast and prostate cancers are frequently treated with chemotherapy. Several novel chemicals are being reported for this purpose, particularly synthetic and natural benzophenones. This work reports the synthesis of substituted 2-hydroxybenzophenones through 1,4-conjugate addition/intramolecular cycloaddition/dehydration of nitromethane on key intermediate chromones. Structures were extensively studied by means of 2D NMR spectroscopy and single-crystal XRD. Their cytotoxicity was evaluated in vitro in two breast cancer cell lines (MDA-MB-231 and T47-D) and one prostate cancer cell line (PC3). The most potent compound exhibited good cytotoxic effects against the three cancer cell lines (IC₅₀ values ranging from 12.09 to 26.49 μm ) and induced cell-cycle retardation only on prostate cancer cells, which suggested that it might exert cell-type-specific effects.     

Extended preservation of raw beef and pork meat by hyperbaric storage at room temperature

Hyperbaric storage (HS) was evaluated as a new food preservation methodology at room temperature (RT) for beef and pork meat, both minced and in pieces, and compared to refrigeration (RF) storage. The meat samples were stored at 50, 75 and 100 MPa and variable RT up to 60 days. HS at 75 and 100 MPa could not only inhibit microbial growth but also inactivate microorganisms. Regarding physicochemical analyses, an overall equal to better pH maintenance in HS samples was achieved, and similar colour differences between HS and RF were observed. Generally, similarities in moisture content and drip loss between HS (mostly 75 and 100 MPa) and RF were detected (tendency for lower values in the former and higher values in the latter for the higher pressure level). Protein solubility revealed a decrease of sarcoplasmic protein values during storage with a pressure level dependency in some samples.     

Challenges in the Application of Stochastic Modal Identification Methods to a Cable-Stayed Bridge

This paper presents an analysis of the data collected in the ambient vibration test of the International Guadiana cable-stayed Bridge, which links Portugal and Spain, based on different output-only identification techniques: peak-picking, frequency domain decomposition, covariance-driven stochastic subspace identification, and data-driven stochastic subspace identification. The purpose of the analysis is to compare the performance of the four techniques and evaluate their efficiency in dealing with specific challenges involved in the modal identification of the tested cable-stayed bridge, namely the existence of closely spaced modes, the perturbation produced by the local vibration of stay-cables, and the variation of modal damping coefficients with wind velocity. The identified natural frequencies and mode shapes are compared with the corresponding modal parameters provided by a previously developed numerical model. Additionally, the variability of some modal damping coefficients is related with the variation of the wind characteristics and associated with a component of aerodynamic damping.     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

Validation of Calibration Methods at NMIs

The National Measurement Institutes (NMIs) topped off its country national measurement system transfer by calibration the traceability to the SI units. In order to fulfill the ISO/IEC 17025 standard, namely point 5.4.5, these laboratories should validate their own laboratory-designed or developed methods for the dissemination of the units. A procedure for validation of calibration methods is proposed and an example of validation of calibration results is drafted by the application of experimental design.     

The influence of magnetron sputtered silver and titanium coatings on the compaction and properties of surface modified PM Ti-48Al powders

Thin layers of silver and titanium were deposited onto commercial Ti–₄₈Al particles by magnetron sputtering prior to their consolidation by hot isostatic pressing and subsequent heat treatment. Based on picnometry and electron probe microanalysis results, average values of 1.5 and 2.5 at.%, respectively, were obtained for the silver and titanium contents in the coated particles. The surface modified Ti–₄₈Al particles exhibited improved sintering ability than the unmodified ones. The consolidated samples have duplex microstructures formed by γ-TiAl and γ-TiAl + α₂-Ti₃Al grains. Ag-rich nanoprecipitates were detected in the microstructure of the compacted Ti-₄₈Al + Ag sample. The coatings are no longer visible at the grains boundaries after a subsequent homogenization heat treatment at 1200°C. The highest values of hardness and Young’s modulus were obtained for the Ti–₄₈Al + Ag sample, associated with a higher density and a lower percentage of pores.     

Second primitive malignant tumour in patients with gynaecological cancer

OBJECTIVE: The purpose of this study was to characterise the occurrence of multiple primitive gynaecological malignant neoplasias, restricted to the genital tract and breast or associated with other organs, and to detect which types of association are most frequent concerning location, histology and staging. POPULATION AND METHODS: The records of patients with gynaecological cancer at the Portuguese Institute of Oncology--Lisbon Centre, between 1986 and 1993 were used in this study. RESULTS: Of the 10,746 women with gynaecological cancer, 91 (0.8%) were found to have a second primitive malignant neoplasia. Of these neoplasias, 64% (58 cases) were also located at a gynaecological site. The most frequent associations were endometrium/breast (13 cases), bilateral breast (12 cases) and ovary/endometrium (11 cases). The majority of primitive multiple gynaecological tumours were synchronous. Regarding gynaecological cancer and non-gynaecological cancer, in 28 cases (31%), the most common non-gynaecological location was the colon/rectum. Five patients had triple tumours. CONCLUSION: Although these situations are relatively rare the possibility of multiple primitive cancers should be considered with the presence of malignant tumours in two or more organs. This distinction between multiple primitive or metastatic cancers could be important for treatment as well as prognosis.     

Analysis of amyloid deposition in a transgenic mouse model of homozygous familial amyloidotic polyneuropathy

Amyloid fibrils derived from the Japanese, Portuguese, and Swedish types of familial amyloidotic polyneuropathy all consist of a variant transthyretin (TTR) with a substitution of methionine for valine at position 30 (TTR Met 30). In an attempt to establish an animal model of TTR Met-30-associated homozygous familial amyloidotic polyneuropathy and to study the structural and functional properties of human TTR Met 30, we generated a mouse line carrying a null mutation at the endogenous ttr locus (ttr-/-) and the human mutant ttr gene (6.0-hMet 30) as a transgene. In these mice, human TTR Met-30-derived amyloid deposits were first observed in the esophagus and stomach when the mice were 11 months of age. With advancing age, amyloid deposits extended to various other tissues. Because no significant difference was detected in the onset, progression, and tissue distribution of amyloid deposition between the ttr-/- and ttr+/+ transgenic mice expressing 6.0-hMet 30, endogenous normal mouse TTR probably does not affect the deposition of human TTR Met-30-derived amyloid in mice. TTR is a tetramer composed of four identical subunits that binds thyroxine (T4) and plasma retinol-binding protein. The introduction of 6.0-hMet 30 into the ttr-/- mice significantly increased their depressed serum levels of T4 and retinol-binding protein, suggesting that human TTR Met 30 binds T4 and retinol-binding protein in vivo. The T4-binding ability of human TTR Met 30 was confirmed by the analysis of T4-binding proteins in the sera of ttr-/- transgenic mice expressing 6.0-hMet 30. The T4-binding studies also demonstrated the presence of hybrid tetramers between mouse and human TTR subunits in the ttr+/+ transgenic mice expressing 6.0-hMet 30.