Desalination by distillation and by reverse osmosis — trends towards the future

As the requirement for fresh water increases worldwide, there is a need for more and more plants that are able to treat non-conventional water sources. Sea water has become an important source of fresh water in many arid regions. This feature provides an overview of recent process improvements in sea water desalination using reverse osmosis, multi-stage flash, multi-effect distillation and electrodialysis. Areas discussed include the use of alternative energy sources (wind energy, solar energy and nuclear energy) for reverse osmosis or distillation processes, and the impact of the different desalination process on the environment. Also covered are the implementation of hybrid processes in sea water desalination, and the pretreatment of desalination plants by pressure-driven membrane processes.     

Insertional re-activation of a chloramphenicol acetyltransferase misfolding mutant protein

The deletion of nine residues from the C-terminus of the bacterialchloramphenicol acetyltransferase (CAT) results in depositionof the mutant protein in cytoplasmic inclusion bodies and lossof chloramphenicol resistance in Escherichia coli. This foldingdefect is relieved by C-terminal fusion of the polypeptide withas few as two residues. Based on these observations, efficientpositive selection for the cloning of DNA fragments has beendemonstrated. The cloning vector encodes a C-terminally truncatedCAT protein. Restriction sites in front of the stop codon allowthe insertion of target DNA, resulting in the production ofproperly folded CAT fusion proteins and regained chloramphenicolresistance. The positive selection of recombinants is accomplishedby growth of transformants on chloramphenicol-containing agarplates. The method appears particularly convenient for the cloningof DNA fragments amplified by the PCR because minimal informationto restore CAT folding can be included in the primers. The cloningof random sequences shows that the folding defect can be relievedby fusion to a wide variety of peptides, providing great flexibilityto the positive selection system. This vector may also contributeto the determination of the role of the C-terminus in CAT folding.     

Intramolecular crosslinking of poly(vinyl alcohol)

Poly(vinyl alcohol) is crosslinked in dilute solution (c=0.1 wt%) with glutaraldehyde. The reaction product is characterized by viscometry and gel permeation chromatography (g.p.c.). The intrinsic viscosity decreases with increasing degree of crosslinking and does not depend on temperature. G.p.c. reveals that the reaction product is not homogeneous, but consists of a mixture of particles with different sizes, possibly both intra- and intermolecularly crosslinked molecules. The intramolecularly crosslinked molecules are smaller in size than the initial polymer molecules and their size depends on the degree of crosslinking. They possess a narrow particle size distribution even if the initial polymer sample had a broad molecular weight distribution.     

Stability studies on methyl and ethyl fatty acid esters of sunflowerseed oil

Fatty acid esters, high in linoleic acid, were prepared and stored for long-term engine tests. Storage tests with these esters were undertaken to obtain more information on optimal storage requirements and general stability characteristics. Samples were kept at three temperature levels (20 C, 30 C and fluctuating around 50 C) for a 90-day period and were removed at regular intervals for chemical and physical analysis. The influence of air, temperature, light, TBHQ and contact with mild steel was evaluated by comparing the free fatty acid, peroxide, anisidine, ultraviolet absorption, viscosity and induction periods. A statistical model was used to evaluate the data and to reduce the large number of data points to comparable curves. Storage of esters in contact with air, especially at a temperature above 30 C, resulted in significant increases in peroxide, ultraviolet absorption, free fatty acid, viscosity and anisidine values. Exclusion of air retarded oxidation at all temperature levels. A direct relationship between viscosity increases and oxidation parameters was evident. Exposure to light caused a small increase in the oxidation parameters of esters stored at the highest temperature level. Addition of TBHQ prevented oxidation of samples stored under moderate conditions. Under unfavorable storage conditions the anti-oxidant was no longer effective. Mild steel had very little effect on the oxidation parameters. Only the anisidine values of samples stored at the highest temperature level were slightly increased. Methyl esters performed slightly better than ethyl esters during the storage test. The following practical guidelines for storage of fatty acid ester fuels are: (i) airtight containers should be used; (ii) the storage temperature should be <30 C; (iii) mild steel (rust free) containers may be used, and (iv) TBHQ has a beneficial effect on oxidation stability.     

Short-pulse, eye-safe Nd:YAG laser using cavity-dumping

A short-pulse 1.444-μm laser based on Nd:YAG technology has been demonstrated. The 1.444-μm is eye-safe. With the cavity-dump technique, a pulse of 50 m× and 14 ns was obtained. The beam quality was excellent with an M² of 1.6 by the use of a telescopic resonator. Silicon-window polarizers were used to suppress the 1.06-μm radiation but showed 1.444-μm absorption as well     

Editorial: Special Issue on “Texture Analysis and Synthesi”

International Journal of Computer Vision -     

Passive-Based Walking Robot

In this article, we presented our passive-based biped Denise. Using only two foot contact switches as sensors and simple on/off pneumatic muscle action, it walks at 0.4 m/s and can handle floor disturbances up to 6 mm (leg length is 0.7 m). Its simplicity, efficiency, and die natural look of its motions make it a promising lead for the development of commercially viable humanoid robots. The aim of this article is to provide other researchers enough details so that they can reproduce the work or use it as a basis for future research.     

High modulus of isotactic polypropylene attained by coextrusion with atactic polystyrene

Orientation-induced crystallization of crystallizable polymer melts can occur, under certain conditions, during flow through converging channels. Attempts have been made to achieve this phenomenon in a two-phase system, i.e., during simultaneous extrusion of a continuous concentric core of polypropylene within a polystyrene matrix through a conical duct. On one occasion, using Carlona P SY6100 (MFI = 11.0) with Hostyren N2000-V-01 (MFI = 25.0), a highly oriented polypropylene thread with a modulus of 14.6 GPa and a melting point of 178°C was extruded at a die temperature of approximately 170°C and a pressure lower than 40 MPa. It is, in principle, possible to form highly oriented, fiber-like structures as reinforcing elements in a polymer matrix.     

Microprocessor testability

As the level of microprocessor complexity increases to several hundred thousand transistors for a single-chip machine, it is becoming very difficult to test commercially available designs to the level of fault coverage desired by some customers. In order to achieve near 100-percent coverage of single stuck-at faults, future microprocessors must be designed with special testing features (designed for testability). The authors describe the testing problem for microprocessors, including the various methods of generating test sets and their application by the user. A survey of the testability features of some of today's commercially available microprocessors is presented. Suggestions for testability features for future-generation microprocessors are also discussed     

IPv6 delay and loss performance evolution

Although packet delay and loss are two important parameters of the Internet performance, to the best of our knowledge, the evolution of large‐scale IPv6 delay and loss performance has previously not been studied. In this paper, we analyze more than 600 end‐to‐end IPv6 paths between about 26 testboxes of RIPE Network Coordination Centre over two years, and compare the delay and loss performance over time with their IPv4 counterparts. We present and discuss the measurement methodologies and show that IPv6 paths have a higher delay and loss than their IPv4 counterparts. The main reason for the worse performance stems from IPv6‐in‐IPv4 tunnels rather than from native IPv6 paths and such tunnels are still widely used today. Copyright © 2007 John Wiley & Sons, Ltd.