Multi-dimensional analysis of soil moisture dynamics in trickle irrigated fields. II: Model testing

The mathematical model which was developed in part I of this work for multi-dimensional analysis of soil moisture in irrigated fields is converted into computer algorithms. The algorithms are capable of emulating many field conditions of practical applications during both design and operation phases. The model is subjected to various tests, the results of which are reported here. The tests in various modes of simulations verified the numerical performance of the model and the accuracy of its predictions. The model provides a powerful tool for detailed studies of soil moisture dynamics in one or multi-dimensional problems irrigated fields     

A comparative study of the electrochemical behaviour of Algerian zinc and a zinc from a commercial sacrificial anode

Zinc is used in the oil industry as a sacrificial anode for protecting steel storage tanks from corrosion. The behaviour of a sample of zinc from the Algerian metallurgy industry (zinc A) and a commercially available zinc (zinc B) was compared in an electrolyte from storage tank drainage water. The corrosion potential measurements for zinc A confirmed that this material could be used as a sacrificial anode. The polarization curves of the two materials (zinc A and zinc B) were different, zinc A being the least polarized. Thus, the same corrosion protection could be obtained with a lower surface ratio (S _Zn/S _Fe) for Zinc A. Cyclic voltammetry curves provided evidence of a surface layer formed by dissolution products. To provide protection over extended periods of time, the zinc anode must be oversized. The two types of zinc tested were comparable.The results of the impedance spectroscopy study confirmed the previous results. The corrosion layer formed on zinc A was not prejudicial to dissolution. Hence, the properties of this zinc were found to be satisfactory for its use as a sacrificial anode.     

A furostanol saponin from fruits of Balanites aegyptiaca

A new furostanol saponin was isolated from the mesocarp of Balanites aegyptiaca fruits and identified as 26-O-beta-D-glucopyranosyl-(25R)-furost-5-ene-3,22,26-triol 3-O-[[alpha-L-rhamnopyranosyl-(1-->2)]-[beta-D-xylopyranosyl-(1-->2)]-be ta- D-xylopyranosyl-(1-->2)]-beta-D-xylopyranoside (balanitesin).     

Creation of reactive centers on cotton. IV. Reaction of acrylamidomethylated cotton with some sulfur compounds

The addition of mercaptoethanol and hydrogen sulfide to the pendent double bonds of acrylamidomethylated cotton (AMC) has been investigated. The interaction of acrylonitrile with the modified celluloses so obtained (substrate I and II) and with AMC treated with ammonium hydroxide (substrate III) in the presence of Ce(IV) is studied. Substrate I shows higher initial grafting yields. than AMC; the opposite holds true for the maximum graft yields. The graft yields obtained with substrate II are lower than those of AMC. All modified cottons studied are less amenable to grafting compared with the unmodified cotton. The graft yields of AMC and substrate III are comparable due to the fact that both substrates are crosslinked. Probable reasons for the inferior reactivity of substrates I and II are also given.     

Galvanostatic and microscopic studies of nodulation during copper electrolysis

The galvanostatic technique on a laboratory scale has been shown to be a useful tool in detecting the presence of nodules on the cathode during copper electrodeposition by using the value of the starting electrolytic potential and by the presence of a cathodic polarization peak on the potential–time curve. Studying the morphology of the deposit with a scanning electron microscope at various magnifications confirmed the galvanostatic results. It is postulated that inappropriate concentrations and/or ratios of the additives (thiourea, gelatin and chloride ions) are associated with a certain current density that generates intergranular microcracks due to adsorption of the additives and leads to the formation of nodules at the macroscale.     

New results on PWARX model identification based on clustering approach

This paper deals with the problem of piecewise auto regressive systems with exogenous input(PWARX) model identification based on clustering solution. This problem involves both the estimation of the parameters of the affine sub-models and the hyper planes defining the partitions of the state-input regression. The existing identification methods present three main drawbacks which limit its effectiveness. First, most of them may converge to local minima in the case of poor initializations because they are based on the optimization using nonlinear criteria. Second, they use simple and ineffective techniques to remove outliers. Third, most of them assume that the number of sub-models is known a priori. To overcome these drawbacks, we suggest the use of the density-based spatial clustering of applications with noise(DBSCAN) algorithm. The results presented in this paper illustrate the performance of our methods in comparison with the existing approach. An application of the developed approach to an olive oil esterification reactor is also proposed in order to validate the simulation results.     

Anomalous codeposition of Co–Ni: alloys from gluconate baths

Thin films of cobalt–nickel alloys were galvanostatically deposited onto steel substrates from gluconate baths. Cathodic polarization curves were determined for the parent metals and Co–Ni alloy. The effects of bath composition, current density and temperature on cathodic current efficiency (CCE) and alloy composition were studied. The deposition of Co–Ni alloy is of anomalous type, in which the less noble metal (Co) is preferentially deposited. The CCE of codeposition is high and increases with increase in temperature and current density, but it decreases as the [Co²⁺]/[Ni²⁺] ratio in the bath increases. The percentage of Co in the deposit increases with increasing cathodic current density, temperature and increasing Co²⁺ ion concentration. The structure and surface morphology of the deposit were studied by XRD, ALSV and SEM. The results showed that the alloys consisted of a single solid solution phase with a hexagonal close packed structure.     

A cooperative recurrent neural network for solving L(1) estimation problems with general linear constraints

The constrained L(1) estimation is an attractive alternative to both the unconstrained L(1) estimation and the least square estimation. In this letter, we propose a cooperative recurrent neural network (CRNN) for solving L(1) estimation problems with general linear constraints. The proposed CRNN model combines four individual neural network models automatically and is suitable for parallel implementation. As a special case, the proposed CRNN includes two existing neural networks for solving unconstrained and constrained L(1) estimation problems, respectively. Unlike existing neural networks, with penalty parameters, for solving the constrained L(1) estimation problem, the proposed CRNN is guaranteed to converge globally to the exact optimal solution without any additional condition. Compared with conventional numerical algorithms, the proposed CRNN has a low computational complexity and can deal with the L(1) estimation problem with degeneracy. Several applied examples show that the proposed CRNN can obtain more accurate estimates than several existing algorithms.     

Investigating the influence of the counter Si-cell on the optoelectronic performance of high-efficiency monolithically perovskites/silicon tandem cells under various optical sources

Nowadays, tandem structures have become a valuable competitor to conventional silicon solar cells, especially for perovskite over silicon, as metal halides surpassed Si with tunable bandgaps, high absorption coefficient, low deposition, and preparation costs. This led to a remarkable enhancement in the overall efficiency of the whole cell and its characteristics. Consequently, this expands the usage of photovoltaic technology in various fields of applications not only under conventional light source spectrum in outdoor areas, i.e., AM1.5G, but also under artificial light sources found indoors with broadband intensity values, such as Internet of things (IoTs) applications to name a few. We introduce a numerical model to analyze perovskite/Si tandem cells (PSSTCs) using both crystalline silicon (c-Si) and hydrogenated amorphous silicon (a-Si:H) experimentally validated as base cells. All proposed layers have been studied with J-V characteristics and energy band diagrams under AM1.5G by using SCAPS-1D software version 3.7.7. Thereupon, the proposed architectures were tested under various artificial lighting spectra. The proposed structures of Li4Ti5O12/CsPbCl3/MAPbBr3/CH3NH3PbI3/Si recorded a maximum power conversion efficiency (PCE) of 25.25% for c-Si and 17.02% for a-Si:H, with nearly 7% enhancement concerning the Si bare cell in both cases.     

Sense and sidedness in the graphics pipeline via a passage through a separable space

Computer graphics is ostensibly based on projective geometry. The graphics pipeline—the sequence of functions applied to 3D geometric primitives to determine a 2D image—is described in the graphics literature as taking the primitives from Euclidean to projective space, and then back to Euclidean space. This is a weak foundation for computer graphics. An instructor is at a loss: one day entering the classroom and invoking the established and venerable theory of projective geometry while asserting that projective spaces are not separable, and then entering the classroom the following week to tell the students that the standard graphics pipeline performs clipping not in Euclidean, but in projective space—precisely the operation (deciding sidedness, which depends on separability) that was deemed nonsensical. But there is no need to present Blinn and Newell’s algorithm (Comput. Graph. 12, 245–251, 1978; Commun. ACM 17, 32–42, 1974)—the crucial clipping step in the graphics pipeline and, perhaps, the most original knowledge a student learns in a fourth-year computer graphics class—as a clever trick that just works. Jorge Stolfi described in 1991 oriented projective geometry. By declaring the two vectors and distinct, Blinn and Newell were already unknowingly working in oriented projective space. This paper presents the graphics pipeline on this stronger foundation.